Olivers_AR

This you can use a full sized smooth trigger.

Blue Ridge or NRA HQ range to practice. NRA HQ firearms museum, Air and Space Museum near Dulles, it's worth the trip. Fly out of Dulles (IAD) for Fairfax, DCA second choice. Don't fly out of BWI, its 2+ hours in traffic if you have make a flight.

This, learn from it, even top level shooters get DQed. During stage planning, try and go left to right if your right handed, opposite if your left handed.

This, I was able to source longer screws at Lowes and paint them black to match. Also it depends on which belt you are wearing and how it fits and if you are using a tech-lock or other attachement.

Plus one on ROing wife/GF/SO. Same goes with teaching them to shoot or shoot better.

Ok I'll bite, who produces 9mm Major ammo? Wish Atlanta Arms would, I have a gift certificate.

7.7g CFE, 124jhp MG, CCI 500 will make 180+PF in a 5" 4 hole STI.

I've had scores posted 45 days later, if its a classifier and it makes a difference, then push the issue, otherwise focus on the next match. I also would doublecheck at the next match either at checkin or during scoring, it can be changed prior to upload. MDs do get busy, but you are a client.

https://www.facebook.com/media/set/?set=a.419009934905827.1073741853.242639402542882&type=1

I had a local holster maker mold me an open kydex holster that covered the C-more. Worked great at 3 gun match, and protected the gun from getting banged around and even going prone was fine. I have since changed to a 90 mount for the c-more, so won't be able to use it. Will get a newer holster make when I get a chance.

Sounds like a standard filter, similar to what schools and others use.

This!

Due to economic circumstances, may need to give up my slot currently on squad 14. If you didn't get a slot or have a friend, teammate, etc that wants to shoot, send me a PM.

Welcome!

Tag for interest, considering going this route since I get some FTEs hanging up on the standard mount. I also have the 6 hole STI slide and wonder if I'm going to have to get a blank and drill it or if I can use the 5 hole mount and not put the 6th screw in?

As said no rule against it. Another way to look at it, speeds up one minute per shooter, 120 shooters in a day is 2 hours faster.

This, RO should have avoided saying Make Ready, poor choice of words.

I shot with folks from Charlotte at the Tarheel 3 gun (Durham/Apex area).

Stippling is fine. Don't recommend that you undercut trigger guard if you decide you want to shoot production in USPSA. Short of adding an optic (moves to open), you can add magwells, extended mags (depends on state), mag releases, etc. ETA: as mentioned comps

I got a Competition Electronics Pocket Pro 2 Shot Timer from sorting change and turning it into Amazon credits. Its big but great for practices and local matches. Most big matches use the 7000s, once they get beyond initial failure rates, seem to run ok.

Yes, for example if the slide rack on an Open gun "props" it up, still good to go. If the shooter bumps the table and it falls off or pointing at the shooter, breaks the 180, etc DQ. If a competitor were to place his loaded gun so that it touches the "X" mark, the muzzle pointing downrange but it was not laying on it's side, is that a valid position? This particular weapon has a compensator with a flat bottom and the magazine extension had a flat front. The gun was able to "stand" upright with the muzzle pointing downrange albeit it was pointing at the table and the range floor. What says the collective range officer community? Let him start that way or tell him it has to lay on it's side and stop trying to game the classifier? Is there an applicable rule? BC

Anyone have these in stock? I see backorders and longer leadtimes at the usual places? Would like to use 'Driod and chrono before the Area 8 sectional May 14th.

Welcome! Plenty of USPSA matches in the area. Fairly active wheelgunners in some of the local matches.

This! Looking for the long term. Will be Sr class this year.

Welcome to the site!