RayBar
Members-
Posts
42 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by RayBar
-
Primers keep sticking in primer tip on 1050
RayBar replied to GunslingerDK's topic in Dillon Precision Reloading Equipment
Is the knurled nut which sits on top of the primer magazine too tight? All the primer issues I've ever had on my 1050 has been worn primer magazine orifices or tight a knurled nut. -
The first add on is to ditch the ratchet.
-
picked up a press light for the 550
RayBar replied to rustybayonet's topic in Dillon Precision Reloading Equipment
I use these from Amazon Magnetic base, 110v w/7 in. Gooseneck.... https://www.amazon.com/Magnetic-Mounting-Working-Gooseneck-Machine/dp/B008RA1XGK/ref=sr_1_8?ie=UTF8&qid=1472164532&sr=8-8&keywords=led+magnetic+light -
New 1050 not seating new primers
RayBar replied to B_RAD's topic in Dillon Precision Reloading Equipment
Replace the primer orofice on the end of the magazine tube. The knurled nut (which the primer alarm sits on) does not need to be tight. -
Dillon Super 1050 Primer Hold Down Die
RayBar replied to MeatPuppet's topic in Dillon Precision Reloading Equipment
Try Teflon tape on the threads of the adjustment rod. Worked for me. -
Dillon Super 1050 Primer Hold Down Die
RayBar replied to MeatPuppet's topic in Dillon Precision Reloading Equipment
Looks like the flash hole will be sealed as the bolt supports the case? Could be very dangerous if a primer ignites...... -
Should I move up to 1050 from 550
RayBar replied to jerryz's topic in Dillon Precision Reloading Equipment
I too have a bullet fed 1050. If you're only going to load 45 acp, I think you'd be fine with a bullet fed 650. With a case feeder, volume wouldn't be that far behind. -
Dillon Super 1050 primer problems
RayBar replied to Ace4059's topic in Dillon Precision Reloading Equipment
I bet that's your problem....- 26 replies
-
- primer feeding problems
- primmer issue
-
(and 1 more)
Tagged with:
-
Dillon Super 1050 primer problems
RayBar replied to Ace4059's topic in Dillon Precision Reloading Equipment
Have you replaced the primer magazine orifice?- 26 replies
-
- primer feeding problems
- primmer issue
-
(and 1 more)
Tagged with:
-
Super 1050 How much time? Going from 9mm to 45ACP
RayBar replied to oteroman's topic in Dillon Precision Reloading Equipment
Though I removed the ratchets & anything involved with it, a good wipe down & re-greasing the necessary parts - 30 minutes from 9 to large primer 45. This includes the changing the swage rod & separate toolheads for each caliber. Changing over the primer system really isn't that bad.... -
I get smashed primers when my shell plate is too low -or- worn magazine orifice.....
- 39 replies
-
650XL powder check drawing powder out of case
RayBar replied to amada8's topic in Dillon Precision Reloading Equipment
Ditch it & add a bullet feeder..... -
1050 .223 sideways primers
RayBar replied to PSSOH22's topic in Dillon Precision Reloading Equipment
I'd have that problem when my shell plate is too tight. Winchester primers aren't the most consistent, either. -
Got the spring from an old leaking beat up pneumatic quick disconnect fitting...
-
I get them @ Ace Hardware.
-
S1050 Micrometer Seat Dies in an S1050
RayBar replied to pmclaine's topic in Dillon Precision Reloading Equipment
Can you mill a channel on the die body & sleeve below the tool head so the bullet could pass through? -
Personally, large batch runs of 9 or 40 cramps up my fingers in no time. Not so much a problem in 223 or 45. Bulletfeeder arrived yesterday, problem solved....
-
I plumbed a drainage system in to a spent primer container Also plumbed a drain from station 3 in to a spent primer containter as I swage on loading
-
I based mine to match Dillion's color which came out to 13:1. Also feels the same.
-
1050 Casefeed Launching Brass/Binding
RayBar replied to JohnH1313's topic in Dillon Precision Reloading Equipment
I had this problem running my 1050 by hand. I raised the expander ball/decapper as high as I could in the die. Solved my problem. YMMV -
650 vs 1050 to gradually automate
RayBar replied to Haraise's topic in Dillon Precision Reloading Equipment
My goodness, that's like a Sooper Dooper 1050! Envious...... -
650 vs 1050 to gradually automate
RayBar replied to Haraise's topic in Dillon Precision Reloading Equipment
I have a 1050. If I had to do it over again, I'd get both...... -
Currently, it's more complicating to find powder locally than the alchol/lanolin locally.....
-
Dibs
-
Sarge: Idk what part of Ohio you're from but try calling one of these places. http://www.organicstorelocator.com/all-ohio.html