IntenseImage Posted February 28, 2018 Share Posted February 28, 2018 Here is the start of our daughters PCC using the gen3 and the gen2 that my wife has been using Sent from my SM-G955U using Tapatalk Link to comment
RWE Posted March 14, 2018 Share Posted March 14, 2018 On 2/26/2018 at 1:51 PM, wyliearms said: Yes. DOH! I tried to figure out "the one to get" and finally ordered. I literally just picked up my Gen 2 complete MOE lower yesterday..... Big deal??? Anything I should know?? Link to comment
robert3405 Posted April 3, 2018 Share Posted April 3, 2018 I've got a Gen 2 PSA 9mm lower coupled with a 16" PSA 9mm upper. All it does is go bang! No issues whatsoever. Shooting my first PCCO steel challenge April 21st. I have a Vortex Sparc AR red dot sight on it and 4 Glock 33 round mags. Link to comment
SWprotected Posted August 23, 2018 Share Posted August 23, 2018 I know this is a little bit old, but has anyone had success finding a magwell for the Gen 3 PSA lowers PX-9? I ordered a magwell from shooters connection and did not see that it was for the previous model lower. Link to comment
Flatland Shooter Posted August 23, 2018 Share Posted August 23, 2018 2 hours ago, SWprotected said: I know this is a little bit old, but has anyone had success finding a magwell for the Gen 3 PSA lowers PX-9? I ordered a magwell from shooters connection and did not see that it was for the previous model lower. When the PSA Gen 3 first came out, bmiller said he would build one. Give him a shout. His are excellent. Link to comment
IHMSA15151 Posted August 23, 2018 Share Posted August 23, 2018 7 hours ago, Flatland Shooter said: When the PSA Gen 3 first came out, bmiller said he would build one. Give him a shout. His are excellent. What material are his magwell made of? Thanks, Steve Link to comment
Flatland Shooter Posted August 24, 2018 Share Posted August 24, 2018 33 minutes ago, IHMSA15151 said: What material are his magwell made of? Thanks, Steve Mine was an early aluminum magwell. I believe he has also played with the 3-d printer stuff (don't have a clue to the technical name). He can probably make it for you in either material but you need to visit with him. He's frequently on the forum. Mine has had a lot of hard use and its still in great condition. For every reload in a match I've loaded hundred times in dryfire and practice. (I better be careful, I'm about to talk myself into getting an additional one for another lower.) Link to comment
IHMSA15151 Posted August 24, 2018 Share Posted August 24, 2018 14 hours ago, Flatland Shooter said: Mine was an early aluminum magwell. I believe he has also played with the 3-d printer stuff (don't have a clue to the technical name). He can probably make it for you in either material but you need to visit with him. He's frequently on the forum. Mine has had a lot of hard use and its still in great condition. For every reload in a match I've loaded hundred times in dryfire and practice. (I better be careful, I'm about to talk myself into getting an additional one for another lower.) Thanks for the info. Link to comment
Fowlmouths Posted August 30, 2018 Share Posted August 30, 2018 Here is my PSA combination, gen 3 lower and my gen 3 upper as well. Just over 7#s. Affectionately known as "JuNkWorKs" Link to comment
armedmoose Posted September 10, 2018 Share Posted September 10, 2018 Are there any upgraded ejector parts available for a gen 1 lower? Had issues this weekend with not ejected brass. Or even an in spec measurement to verify its otherwise magazines related. Link to comment
hiker88 Posted September 10, 2018 Share Posted September 10, 2018 32 minutes ago, armedmoose said: Are there any upgraded ejector parts available for a gen 1 lower? Had issues this weekend with not ejected brass. Or even an in spec measurement to verify its otherwise magazines related. How’s your extractor? That’s one of the weak points of the PSA/NFA BCG. Link to comment
armedmoose Posted September 11, 2018 Share Posted September 11, 2018 On 9/10/2018 at 9:04 AM, hiker88 said: How’s your extractor? That’s one of the weak points of the PSA/NFA BCG. I've switched to a AR9 Bolt with an .223 style extractor a while back, the PSA bolt now is in the backup PCC. I am trying to eliminate my failure points trying to determine the cause of my weekend match issues and upgrading as I do have an older lower. Link to comment
hiker88 Posted September 11, 2018 Share Posted September 11, 2018 3 hours ago, armedmoose said: I've switched to a AR9 Bolt with an .223 style extractor a while back, the PSA bolt now is in the backup PCC. I am trying to eliminate my failure points trying to determine the cause of my weekend match issues and upgrading as I do have an older lower. I have the older lower too. I moved on to a Faxon bcg. I had the extractor claw of my PSA bcg sheared of twice.The first time PSA fixed it. The second time I replaced it myself. The PSA bcg now stays in my range bag as a back up. Good luck with your search for a fix. Link to comment
gmantwo Posted September 16, 2018 Share Posted September 16, 2018 I bought a PSA on here and am not sure which it is. I think it’s the forged, but would like to see if you agree. Looking at the Titan Rocket mag well Link to comment
stick Posted September 16, 2018 Share Posted September 16, 2018 6 hours ago, gmantwo said: I bought a PSA on here and am not sure which it is. I think it’s the forged, but would like to see if you agree. Looking at the Titan Rocket mag well That looks like a forged, but I would ask @wyliearms he's the expert Link to comment
SWprotected Posted September 16, 2018 Share Posted September 16, 2018 I agree, it looks like one of the forged lowers. Link to comment
wyliearms Posted September 16, 2018 Author Share Posted September 16, 2018 I bought a PSA on here and am not sure which it is. I think it’s the forged, but would like to see if you agree. Looking at the Titan Rocket mag well Yes. That is the forged Gen1. You can tell by the hole where the roll pin used to go for the LRBHO. Sent from my SM-G935V using Tapatalk Link to comment
gmantwo Posted September 16, 2018 Share Posted September 16, 2018 Thanks, ordered a mag funnel Link to comment
IHMSA15151 Posted September 26, 2018 Share Posted September 26, 2018 On 1/22/2018 at 9:56 AM, wyliearms said: Whether you are purchasing one new or own one that you need help with, you can use this to help you identify PSA's most popular components. For instance, troubleshooting an ejection issue on a billet is a little different than the forged, etc. If you have any questions, feel free to ask. I have a Gen 2 lower and I bought the upper at the same time so I am assuming it's a Gen 2 as well. Is the Gen 3 bolt better than the Gen 2 in any way? Would there be any advantage to upgrading? Thanks, Steve Link to comment
PigSnowball Posted February 25, 2019 Share Posted February 25, 2019 Does anyone know what these "gen4" changes are? The lower looks like a gen1...https://palmettostatearmory.com/psa-gen4-4-9mm-1-10-gx-m-lok-moe-ept-shockwave-pistol-5165450018.html Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now