tcazes Posted March 6, 2018 Share Posted March 6, 2018 Thanks yall! I decided to test 6.8, 7.0, 7.2, 7.4 and 7.6. I'm hoping I can stay around 169pf and still be super flat. I have driving over 170pf lol Link to comment Share on other sites More sharing options...
GWChris Posted March 6, 2018 Share Posted March 6, 2018 How did the 8.0 at 169PF shoot was it flat at all. As I'm shooting at 172PF and Adam said I could bring it down to 169-170PF and still shoot flat. I haven't tried it yet. It was pretty flat. I'm going to go with 8.1 and see how that is. Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
bluedevil008 Posted March 7, 2018 Share Posted March 7, 2018 Atlas just released their line of tuned magazines. Prices aren't too bad, equivalent to MBX prices. The tuned mag that came with my gun gives me more warm and fuzzies over the MBX, though they do run well. The one MBX magazine that had some issues is getting replaced by MBX free of charge. Great service! Point is... it's a good option. Link to comment Share on other sites More sharing options...
tcazes Posted March 7, 2018 Share Posted March 7, 2018 I got one of their new ones with my chaos. Great option to give my sv mags a break every now and then. Link to comment Share on other sites More sharing options...
tcazes Posted March 7, 2018 Share Posted March 7, 2018 (edited) so today i tested some new ammo out of my gun and 7.1 was the cats meow. the gun was so smooth and flat it felt like you could shoot it with just your finger tips. im in love with this thing! i did try all of these with small pistol primer and for some odd reason 6.8 showed some cratering, and 7.2 had some flattening but 7.1 had a nice profile to it. ill post pictures of that later. temp 52 deg, pressure 30 bullet weight 124 gr precision deltas(124.4) 1.166 OAL just enough crimp to remove the flare 9mm major 6.8 WAC avg- 1354 SD- 19 Extreme Spread- 70 PF AVG- 167 PF Low- 165 PF High- 174 7.1 WAC avg- 1373 SD- 9 Extreme Spread- 30 PF AVG- 170 PF Low- 168 PF High- 172 7.2 WAC avg- 1400 SD- 8 Extreme Spread- 32 PF AVG- 173 PF Low- 171 PF High- 175 This is 6.8. Notice the slight pressure signs. 7.1 notice nice and round (left side) 7.2 (middle) flattened face and some minor cratering Edited March 8, 2018 by tcazes I had the wrong bullet brand! Link to comment Share on other sites More sharing options...
Gman57 Posted March 7, 2018 Share Posted March 7, 2018 This is my load with WAC..... Link to comment Share on other sites More sharing options...
tcazes Posted March 7, 2018 Share Posted March 7, 2018 43 minutes ago, Gman57 said: This is my load with WAC..... Is this for 38s/sc? That oal looks a little funky lol Link to comment Share on other sites More sharing options...
Gman57 Posted March 9, 2018 Share Posted March 9, 2018 (edited) On 3/7/2018 at 5:31 PM, tcazes said: Is this for 38s/sc? That oal looks a little funky lol No... my bad 9mm major runs 1.163 + or - .002...... not 1.63 ha Edited March 9, 2018 by Gman57 Link to comment Share on other sites More sharing options...
SeattleDude Posted March 9, 2018 Share Posted March 9, 2018 Link to comment Share on other sites More sharing options...
tcazes Posted March 9, 2018 Share Posted March 9, 2018 (edited) Hells yea dude! I was about to say gman! Lmao. I'm fighting pretty consistent light primer strikes right now. I think it's from not fully seating (I go pretty slow trying not to spill powder) Edited March 9, 2018 by tcazes Link to comment Share on other sites More sharing options...
Covfefe Posted March 9, 2018 Share Posted March 9, 2018 8 hours ago, SeattleDude said: Thats awesome! Absolutely dying to get my Titan next week. My alpha x is just waiting. Link to comment Share on other sites More sharing options...
Moloch38 Posted March 9, 2018 Share Posted March 9, 2018 Is that an earpro clip just to the right of the magwell on your belt? Worth getting? Great looking setup! Link to comment Share on other sites More sharing options...
jliew08 Posted March 9, 2018 Share Posted March 9, 2018 On 3/3/2018 at 12:29 AM, falconpilot said: Finally here!! Worked it on a plate a little bit this evening with loads for my soon to be sold other open gun...dot never left the scope! I'm very excited and impressed! Is this the extra short-flat trigger or just the short-flat? Link to comment Share on other sites More sharing options...
tcazes Posted March 9, 2018 Share Posted March 9, 2018 That's extra short. Mine has the short Link to comment Share on other sites More sharing options...
SeattleDude Posted March 9, 2018 Share Posted March 9, 2018 1 hour ago, Moloch38 said: Is that an earpro clip just to the right of the magwell on your belt? Worth getting? Great looking setup! No. It's a belt keeper. =) Link to comment Share on other sites More sharing options...
GWChris Posted March 10, 2018 Share Posted March 10, 2018 No. It's a belt keeper. =) If interested, my company does mag carrier wraps for the daa mag carriers. Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
tcazes Posted March 10, 2018 Share Posted March 10, 2018 has anyone here done a comparison of hs6 vs wac out of the chaos yet? mine has been running well but curious if it could be even flatter Link to comment Share on other sites More sharing options...
TANFARM Posted March 11, 2018 Share Posted March 11, 2018 Following all these reports with great interest ...9 mm 2 months out.....keep these comments and results coming... very interesting...Thanks to all.. Link to comment Share on other sites More sharing options...
SeattleDude Posted March 13, 2018 Share Posted March 13, 2018 On 3/10/2018 at 12:51 PM, GWChris said: If interested, my company does mag carrier wraps for the daa mag carriers. Sent from my iPhone using Tapatalk Pro PM me if you have a min and tell me more about it. I am not sure what Mag Carrier Wrap is =) Link to comment Share on other sites More sharing options...
RaylanGivens Posted March 14, 2018 Share Posted March 14, 2018 On 3/9/2018 at 10:02 AM, jliew08 said: Is this the extra short-flat trigger or just the short-flat? On 3/9/2018 at 11:12 AM, tcazes said: That's extra short. Mine has the short How did you two locate your GoGuns gas pedals? Is that just the way they came from Atlas? Seems odd that the gun with the longer trigger has the thumb rest closer... and the thumb rest farther away on the gun with the shortest trigger... Curious? Link to comment Share on other sites More sharing options...
tcazes Posted March 14, 2018 Share Posted March 14, 2018 That's the way it came from them. I definitely like it though. I honestly don't think you have to look at those together. It's more overall hand size not so much trigger finger reach. I have seen people with massive hands like super short triggers and vice a versa. Link to comment Share on other sites More sharing options...
SeattleDude Posted March 14, 2018 Share Posted March 14, 2018 Arts and Crafts time. Olfa blade, Sharpie and Foam scraps from work. Perfect secure fit for Pelican 1450 for travel. =) Link to comment Share on other sites More sharing options...
SeattleDude Posted March 14, 2018 Share Posted March 14, 2018 Link to comment Share on other sites More sharing options...
tcazes Posted March 14, 2018 Share Posted March 14, 2018 Nice! Link to comment Share on other sites More sharing options...
Bwilmot Posted March 15, 2018 Share Posted March 15, 2018 5 hours ago, SeattleDude said: Awesome set up ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now