MemphisMechanic Posted December 19, 2016 Share Posted December 19, 2016 (edited) I do indeed. Adjusted to just barely kiss the sides of the case and fix any "Gauge failure" bulges that might be present, but I take the time to pull bullets when setting up a FCD to make sure it isn't affecting the size of the bullet, or crimping down into the coating. Most FCD issues come from having them set too aggressively. Edited December 19, 2016 by MemphisMechanic Link to comment Share on other sites More sharing options...
Croomrider Posted December 21, 2016 Share Posted December 21, 2016 Does anybody know it Prima-V is temperature sensitive? Link to comment Share on other sites More sharing options...
jester121 Posted December 21, 2016 Share Posted December 21, 2016 Anecdotal report from another forum indicated it is not. Link to comment Share on other sites More sharing options...
twister Posted December 29, 2016 Share Posted December 29, 2016 I recently got this powder from Powder Valley, and very happy with it in my 9mm loads. Very clean, and no smoke. Have been using Tightgroup, will stay with Prima V until something better comes along. Link to comment Share on other sites More sharing options...
hwansikcjswo Posted December 29, 2016 Share Posted December 29, 2016 On 12/21/2016 at 7:20 AM, Croomrider said: Does anybody know it Prima-V is temperature sensitive? My experience with PV, It's not Temp. sensitive. I live in rainy NW Washington, I shot matches in very different Temp. location like UT, FL and IL. I have not experienced noticeable change in the Power factor Link to comment Share on other sites More sharing options...
MeatPuppet Posted January 6, 2017 Share Posted January 6, 2017 Graf & Son's has Prima V & Prima SV on sale for $16.99 for 1.1lbs as of 01/05/17. Link to comment Share on other sites More sharing options...
fbzero Posted January 13, 2017 Share Posted January 13, 2017 On 1/5/2017 at 8:16 PM, MeatPuppet said: Graf & Son's has Prima V & Prima SV on sale for $16.99 for 1.1lbs as of 01/05/17. Wow...I jumped on that deal a while back, can't believe it's still going! Link to comment Share on other sites More sharing options...
Bamboo Posted January 13, 2017 Share Posted January 13, 2017 PV has it for $15.35 per 1.1 lb. container. When Grafs had the free Hazmat special that was a pretty decent deal, but without it if you are ordering more than about 8 bottles PV may be cheaper. Link to comment Share on other sites More sharing options...
muncie21 Posted January 16, 2017 Share Posted January 16, 2017 On 1/13/2017 at 5:45 PM, Bamboo said: PV has it for $15.35 per 1.1 lb. container. When Grafs had the free Hazmat special that was a pretty decent deal, but without it if you are ordering more than about 8 bottles PV may be cheaper. Yea, I'm pretty bummed that I missed the free hazmat deal from Grafs. I'm currently using N320 and wanted to try the Prima V out. Link to comment Share on other sites More sharing options...
Cfish Posted January 16, 2017 Share Posted January 16, 2017 I was using N320 and have no negatives about it but the price. That being said, Prima V is definitely my new powder of choice for 9mm. Link to comment Share on other sites More sharing options...
fbzero Posted January 17, 2017 Share Posted January 17, 2017 I've been using N320 for my 40's and really like it too, but honestly will probably not continue to use it past what I have on hand because of the price. Link to comment Share on other sites More sharing options...
jcc7x7 Posted January 17, 2017 Share Posted January 17, 2017 Y'all might want to look at the thread in General Reloading under Prima V different batch. I'm not a user but have been researching the powder and came across that thread this evening here on Benos! Link to comment Share on other sites More sharing options...
fbzero Posted January 18, 2017 Share Posted January 18, 2017 20 hours ago, jcc7x7 said: Y'all might want to look at the thread in General Reloading under Prima V different batch. I'm not a user but have been researching the powder and came across that thread this evening here on Benos! Thanks for the heads up! I have some, all from the same batch, but haven't gotten around to using it yet. I'll follow that thread for updates and see if there is anything I need to be aware of. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now