bret Posted July 9, 2016 Share Posted July 9, 2016 Looking for a soft shooting 9mm load.147 grain Blue BulletsSVI Infinity AET 5" Barrelled Limited GunI have VV 310, VV320, Clays, Titegroup, E3.Looking for about 127 PF. Link to comment Share on other sites More sharing options...
biglou13 Posted July 9, 2016 Share Posted July 9, 2016 unsure of velocity or PF 147 flat point blue bullet 3.4 grains tite group was my sweet spot out of cz spo1 Link to comment Share on other sites More sharing options...
bowenbuilt Posted July 9, 2016 Share Posted July 9, 2016 2.8 of N310 2.8 of Clays 2.8 of e3 3.3 of N320 All at 1.150 OAL Link to comment Share on other sites More sharing options...
Smitty79 Posted July 9, 2016 Share Posted July 9, 2016 I shoot 3.2 gn of Titegroup at 1.12 from a CZ Shadow for 134 pf. I didn't think it was as dirty as many say. Link to comment Share on other sites More sharing options...
fischeac Posted July 10, 2016 Share Posted July 10, 2016 Same here, 3.2 gn of TG with a 147 coated pill. Link to comment Share on other sites More sharing options...
fal Posted July 12, 2016 Share Posted July 12, 2016 I weighed some of these bullets today. All weighed between 151-152 grains. Thought they recoiled a little harder than expected. But they do shoot! Link to comment Share on other sites More sharing options...
bret Posted July 14, 2016 Author Share Posted July 14, 2016 I used 3.0 grains of VV 310 Blue Bullets 147 grain at 1.17", .379" crimp, chrono'd at 133 PF, worked great but it does have some unburned powder left in the gun. Link to comment Share on other sites More sharing options...
Kraj Posted July 14, 2016 Share Posted July 14, 2016 2.8 gns of red dot comes in around 130pf in my stock 3 Link to comment Share on other sites More sharing options...
Keydet08 Posted July 14, 2016 Share Posted July 14, 2016 3.0 gr Titegroup 1.14 OAL 132pf in G34 Link to comment Share on other sites More sharing options...
JAM Posted July 14, 2016 Share Posted July 14, 2016 3.0 gr Titegroup 1.14 OAL 132pf in G34 Same load I use. Soft and accurate out of my G34 Link to comment Share on other sites More sharing options...
TANFARM Posted July 15, 2016 Share Posted July 15, 2016 Following....just received my first samples of Blue9mm 147's....flat and round nose. Using Edge and N320....... Any thought on load and COL experiences?......thanks in advance....... Link to comment Share on other sites More sharing options...
e4effort Posted July 16, 2016 Share Posted July 16, 2016 3.1gr TG under 147gr blue bullet, OAL 1.10. PF was floated between 127-128 out of my G34. Link to comment Share on other sites More sharing options...
36873687 Posted July 16, 2016 Share Posted July 16, 2016 3.2 TG ovl1.13 in glock 34 133 Pf. Very soft Link to comment Share on other sites More sharing options...
LawDog64 Posted July 17, 2016 Share Posted July 17, 2016 3.2gr Titegroup with a 147 Blue Bullet at 1.10 OAL in my Glock 34. I was making 139 PF. I dropped my load to 3.0 grains haven't had a chance to chrono yet. I know I'm loading a bit shorter then the other responses on here but I use an EGW case gauge and if they were any longer they weren't seating in the gauge. Link to comment Share on other sites More sharing options...
bandw1dth Posted July 23, 2016 Share Posted July 23, 2016 I'm also using the 147gr FP blue bullets. Usually use TG but recently picked up a pound of not universal Clays. I'm pretty new to handgun reloading as I've got way more experience with rifle. I am having a problem with the OAL on my reloads fluctuating. Normally set at 1.058" per the Lyman 50th but seems to jump around. Anyone got any tips? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
biglou13 Posted July 24, 2016 Share Posted July 24, 2016 I'm also using the 147gr FP blue bullets. Usually use TG but recently picked up a pound of not universal Clays. I'm pretty new to handgun reloading as I've got way more experience with rifle. I am having a problem with the OAL on my reloads fluctuating. Normally set at 1.058" per the Lyman 50th but seems to jump around. Anyone got any tips? Sent from my iPhone using Tapatalk FP should be a longer coal. In a cz. And longer than most other mullet profiles. coal is specific for each different barrel..... Link to comment Share on other sites More sharing options...
bandw1dth Posted July 27, 2016 Share Posted July 27, 2016 I'm also using the 147gr FP blue bullets. Usually use TG but recently picked up a pound of not universal Clays. I'm pretty new to handgun reloading as I've got way more experience with rifle. I am having a problem with the OAL on my reloads fluctuating. Normally set at 1.058" per the Lyman 50th but seems to jump around. Anyone got any tips? Sent from my iPhone using Tapatalk FP should be a longer coal. In a cz. And longer than most other mullet profiles. coal is specific for each different barrel..... Could you elaborate on this for me? Should I not seat to COAL per the manual? Should I do a process like what the Hornady OAL gauge does for my rifle rounds? Seat the bullet just before the lands? Thanks for your help. On a side note I don't suppose anyone knows of an OAL gauge for pistols do they? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
SCTaylor Posted July 27, 2016 Share Posted July 27, 2016 Band - Do the plunk test! http://forums.brianenos.com/index.php?showtopic=200518 Link to comment Share on other sites More sharing options...
bandw1dth Posted July 27, 2016 Share Posted July 27, 2016 Band - Do the plunk test! http://forums.brianenos.com/index.php?showtopic=200518 Exactly what I was looking for! Much appreciated. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
3GDad Posted August 19, 2016 Share Posted August 19, 2016 (edited) On July 17, 2016 at 11:34 AM, LawDog64 said: 3.2gr Titegroup with a 147 Blue Bullet at 1.10 OAL in my Glock 34. I was making 139 PF. I dropped my load to 3.0 grains haven't had a chance to chrono yet. I know I'm loading a bit shorter then the other responses on here but I use an EGW case gauge and if they were any longer they weren't seating in the gauge. Love this load. Very soft, very accurate. I loaded flat point 147 Blue Bullets with 3.2 grains of TG at 1.11 OAL for my G35 with a KKM 40-9 conversion barrel. Awesome load. I stopped using the EGW gauge, it's a tight gauge and had many good loads not pass the EGW. I use the plunk test in the barrel and a Dillon gauge. Just wish I didn't get that blue coating all over my fingers when loading, otherwise no complaints. Edited August 19, 2016 by 3GDad Link to comment Share on other sites More sharing options...
TANFARM Posted August 23, 2016 Share Posted August 23, 2016 Brett....I tested some BB 147 round nose and flat nose 9 mm Saturday in my 2011 147 BB 3.5 grns Vih N320 1.150 COL round nose Averages: 943 935 934 3.5 grns N320 147 BB 1.140 COL flat nose Averages: 941 929 936 3.4 grns N320 1.14 COL round nose Averages : 922 910 923 I've been running 147 Montana Gold with 3.7 grns N320 at 1.15 to ensure 900 + for power factor.....I'm really impressed with these BB stats....more tests this weekend........hope these make some sense!!!! Link to comment Share on other sites More sharing options...
1sickPuppy Posted August 24, 2016 Share Posted August 24, 2016 How heavy are the BB FP? Do they weigh in around 150 like the RN? Link to comment Share on other sites More sharing options...
TANFARM Posted August 24, 2016 Share Posted August 24, 2016 The BB flat nose 147 were coming in at +- 146......Round nose +- 149........ Thanks .....never weighed them prior to testing ...my bad ....... Link to comment Share on other sites More sharing options...
bandw1dth Posted August 24, 2016 Share Posted August 24, 2016 So how's everyone like N320 vs Tite Group? I just got through my supply of TG and would like to try a different powder. Maybe something that meters a bit better. For example; my 115gr XTP work up resulted in my tightest groups at 4.3grs and 130pf But for one reason or another my powder measure will only consistently throw 4.2gr or 4.4gr. Link to comment Share on other sites More sharing options...
Dannybot Posted August 24, 2016 Share Posted August 24, 2016 27 minutes ago, bandw1dth said: So how's everyone like N320 vs Tite Group? I just got through my supply of TG and would like to try a different powder. Maybe something that meters a bit better. For example; my 115gr XTP work up resulted in my tightest groups at 4.3grs and 130pf But for one reason or another my powder measure will only consistently throw 4.2gr or 4.4gr. What did you use for OAL on those rounds? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now