praetorian97 Posted March 18, 2015 Share Posted March 18, 2015 In the process of trying to get my hands on a Stock III for USPSA Production and wanted to start asking some questions. I'm very familiar with the Limited model and shoot a ton of Limited Division. First...what are you running for mag followers/springs? Stock Mecgar/EAA ones or Grams? I know there is the 10 round limitation but curious if the stock setup was reliably feeding after hard/excessive comp use. Link to comment Share on other sites More sharing options...
Yagi Posted March 18, 2015 Share Posted March 18, 2015 (edited) Stock Mecgar Magazines. No need to change anything... Edited March 18, 2015 by Yagi Link to comment Share on other sites More sharing options...
haiedras Posted March 18, 2015 Share Posted March 18, 2015 What he said. Link to comment Share on other sites More sharing options...
praetorian97 Posted March 18, 2015 Author Share Posted March 18, 2015 Thanks! Sure Im going to have some hammer and sear type questions later. I've only played with SA models so far. Link to comment Share on other sites More sharing options...
Nealio Posted March 18, 2015 Share Posted March 18, 2015 Polish everything, run a clipped 14lb spring and it will be great. Come finger my Witness Standard house gun if you want. Link to comment Share on other sites More sharing options...
praetorian97 Posted March 18, 2015 Author Share Posted March 18, 2015 Polish everything, run a clipped 14lb spring and it will be great. Come finger my Witness Standard house gun if you want. Will you be wearing pants this time? Last time was a little embarrassing.... Link to comment Share on other sites More sharing options...
bayougump Posted March 18, 2015 Share Posted March 18, 2015 (edited) Good luck finding a Stock 3 in 9mm but no need for any changes to mags. Polish up according to all the info found on Enos, change front sight (I recommend the 2.5mm EG front sight) and few other parts and go shoot. I shot my Stock 3 in .40 minor and shot very soft. I got another Stock II or else I would still be using it in production PS- if you happen to want a Stock III to shoot .40 minor on production let me know;-) Edited March 18, 2015 by bayougump Link to comment Share on other sites More sharing options...
Adam B Posted March 18, 2015 Share Posted March 18, 2015 stock 3's are starting to show up, I bought 2 on tuesday from a guy in wisconsin and hawktech in Idaho has several for sale. Link to comment Share on other sites More sharing options...
cvincent Posted March 18, 2015 Share Posted March 18, 2015 How much do you want for the stock III, Gump? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nealio Posted March 18, 2015 Share Posted March 18, 2015 Good luck finding a Stock 3 in 9mm but no need for any changes to mags. Did you not get the memo???? http://www.brianenos.com/forums/index.php?showtopic=211774 Link to comment Share on other sites More sharing options...
bayougump Posted March 19, 2015 Share Posted March 19, 2015 Good luck finding a Stock 3 in 9mm but no need for any changes to mags. Did you not get the memo???? http://www.brianenos.com/forums/index.php?showtopic=211774 Evidently not, damn. I want one now but I got enough Tanfos, lol. Well, you can never have enough Link to comment Share on other sites More sharing options...
praetorian97 Posted March 19, 2015 Author Share Posted March 19, 2015 What holster are you guys running for the Stock IIIs? Same Stock II holster work? Does a Blade Tech Limited one work? Link to comment Share on other sites More sharing options...
bayougump Posted March 19, 2015 Share Posted March 19, 2015 I am running the Bladetech one that fits the limited. I would get it from Ben Stoeger Pro Shop with the two tightening screws as it's not as perfect a fit as say my Stock II bladetech holster. I just will tighten them a tad after I holster just to make it feel a little more secure then at LAMR, I will loosen little. It's a great holster for using both the Stock III and Limited Link to comment Share on other sites More sharing options...
BiggMike Posted March 19, 2015 Share Posted March 19, 2015 Stock Mecgar Magazines. No need to change anything... +1 Link to comment Share on other sites More sharing options...
praetorian97 Posted March 19, 2015 Author Share Posted March 19, 2015 Awesome and Thanks. Screws on order and I have a holster on hold at the local shop. Link to comment Share on other sites More sharing options...
BiggMike Posted March 19, 2015 Share Posted March 19, 2015 I am running the Bladetech one that fits the limited. I would get it from Ben Stoeger Pro Shop with the two tightening screws as it's not as perfect a fit as say my Stock II bladetech holster. I just will tighten them a tad after I holster just to make it feel a little more secure then at LAMR, I will loosen little. It's a great holster for using both the Stock III and Limited BladeTech makes a holster for the Stock III. You have to call them. I have one and it took me about 3 weeks to get it. Link to comment Share on other sites More sharing options...
praetorian97 Posted March 19, 2015 Author Share Posted March 19, 2015 I just went through all this Cajunizing a CZ SP01. Not looking forward to it so soon Link to comment Share on other sites More sharing options...
Nealio Posted March 19, 2015 Share Posted March 19, 2015 Evidently not, damn. I want one now but I got enough Tanfos, lol. Well, you can never have enough That's how I'm feeling.. ! Link to comment Share on other sites More sharing options...
Stician Posted March 19, 2015 Share Posted March 19, 2015 I have a pair of Limited Pro 40s coming. Looking forward to getting into the mix here. Link to comment Share on other sites More sharing options...
praetorian97 Posted March 20, 2015 Author Share Posted March 20, 2015 Does anyone know of anyone who has the Titan Hammer in stock? Link to comment Share on other sites More sharing options...
bpipe95 Posted March 20, 2015 Share Posted March 20, 2015 Last round armorment Link to comment Share on other sites More sharing options...
Adam B Posted March 20, 2015 Share Posted March 20, 2015 you can buy it directly from http://www.ericgrauffelonlineshop.com/en/, his prices are cheaper since the dollar is stong right now against the euro Link to comment Share on other sites More sharing options...
praetorian97 Posted March 20, 2015 Author Share Posted March 20, 2015 On my postal scale the Stock III is 45.7 oz with a mag. 41.9 oz without a mag. Link to comment Share on other sites More sharing options...
praetorian97 Posted March 20, 2015 Author Share Posted March 20, 2015 Link to comment Share on other sites More sharing options...
tbarker13 Posted March 21, 2015 Share Posted March 21, 2015 Just grabbed one of the Stock IIIs and will be looking to add a fiber front site. I prefer a thin option in the .100 width or narrower. I see Dawson has a nice selection. Anyone go that route? What height do I need? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now