slinginlead Posted November 14, 2013 Share Posted November 14, 2013 I am getting new Dillon 1050. Do you really need the busing driver Dillon offers? Did you also see the cover for the December magazine? Holy cow, nice one Dillon! Link to comment Share on other sites More sharing options...
HI5-O Posted November 14, 2013 Share Posted November 14, 2013 The one to change between small and large pistol primers? Only if you will change primer sizes. The Dillon catalog takes awhile for it to cross the Pacific Ocean to get to me. Link to comment Share on other sites More sharing options...
rjacobs Posted November 14, 2013 Share Posted November 14, 2013 Bushing driver? Is that the screw driver with the notch cut in the center? My machine came with one. Only "extra" I got was a second 1050 to load 9mm on. Link to comment Share on other sites More sharing options...
slinginlead Posted November 15, 2013 Author Share Posted November 15, 2013 Wow, that was a big extra. Yeah, it is the screwdriver with the notch. I have not got my machine yet, maybe tomorrow. So I will wait and see if it comes with one. Link to comment Share on other sites More sharing options...
bajadudes Posted November 15, 2013 Share Posted November 15, 2013 The metal bullet tray is a very worthwhile accessory to have. Brian includes it if you order the 1050 from him otherwise it's like $40 or something. Link to comment Share on other sites More sharing options...
SD1 Posted November 15, 2013 Share Posted November 15, 2013 Mr Bullet Feeder and RF100. It will be all you need Link to comment Share on other sites More sharing options...
slinginlead Posted November 15, 2013 Author Share Posted November 15, 2013 If this guy buys my old 550 this weekend I will have a rf 100 in my shop. I bought a Vibra Prime and I have almost thrown it across the shop a few times. Link to comment Share on other sites More sharing options...
Less Posted November 15, 2013 Share Posted November 15, 2013 Mr Bullet Feeder and RF100. It will be all you need +1 Link to comment Share on other sites More sharing options...
LoLeft Posted November 18, 2013 Share Posted November 18, 2013 Bushing driver? Is that the screw driver with the notch cut in the center? My machine came with one. Only "extra" I got was a second 1050 to load 9mm on. Mr Bullet Feeder and RF100. It will be all you need One in .40 one in 9mm,RF100 and Mr.Bullet Feeder...Heaven Link to comment Share on other sites More sharing options...
hrt4me Posted January 15, 2014 Share Posted January 15, 2014 I bought a Vibra Prime and I have almost thrown it across the shop a few times. what issues have you experienced? Link to comment Share on other sites More sharing options...
pmclaine Posted January 16, 2014 Share Posted January 16, 2014 Bushing driver comes with. The bullet tray really is a nice add. Rapid Fill in both primer sizes would be an nice accessory. Link to comment Share on other sites More sharing options...
gimpy Posted January 17, 2014 Share Posted January 17, 2014 I've been underwhelmed by my RF-100. It hates Russian primers. Link to comment Share on other sites More sharing options...
pmclaine Posted January 17, 2014 Share Posted January 17, 2014 I've been underwhelmed by my RF-100. It hates Russian primers. Okay, $50 and I'll pay shipping. Link to comment Share on other sites More sharing options...
lvipscshooter Posted January 20, 2014 Share Posted January 20, 2014 My new machine came with the bushing tool. +1 on the Mr. Bullet for sure. No comment on the RF-100 Link to comment Share on other sites More sharing options...
WillM Posted January 20, 2014 Share Posted January 20, 2014 I loaded thousands of Wolf srp using the rf100, took a break for a few years, moved it to a new house, unpacked it and just ran the first 100 of 20,000 Tula srp I just got with no problems and without changing anything from before. I also ran a few hundred Winchester spp I had without changing anything. I used suggestions from this site to set it up the first time and I would buy it again. Link to comment Share on other sites More sharing options...
RePete Posted January 21, 2014 Share Posted January 21, 2014 Mr Bullet Feeder and RF100. It will be all you need +2. Plus the spent primer mod. I went with the complete toolheads for caliber changeover, but my dilemma was how to store the $500 toolheads. I got the idea from this forum but adapted it to the 1050. Now you need one more that you have so that you can place the toolhead on another stand. I built an extra single. Link to comment Share on other sites More sharing options...
Nghthwk1911 Posted January 21, 2014 Share Posted January 21, 2014 RePete, Will you make more of these? I know I would love one of the 3 stand model. and what is the last pic you attached of? Link to comment Share on other sites More sharing options...
RePete Posted January 21, 2014 Share Posted January 21, 2014 RePete, Will you make more of these? I know I would love one of the 3 stand model. and what is the last pic you attached of? No, they are a one off, plus I retired 6 years ago and don't have access to the equipment. Look here for the specs. http://www.brianenos.com/forums/index.php?showtopic=43566&hl= The last pic is the loaded round ejector tab. The original would lockup a 38Sp round and it would have to be removed manually, so I made a taller one, taller at the tip. I used the original for the shape. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now