Iowashooter Posted April 7, 2014 Share Posted April 7, 2014 The sbe II has the sam3 inertia system as the m2 and they both offer the comfort tech shoch system. Recoil between the stoeger and Benelli would be very comprable. I would go m2 over the sbe II if he doesn't want or need 3 1/2" capabilities. But the Stoeger would also be a good gun. It isn't as pretty in the fit and finish department like a Benelli but it goes boom and will break clays and that is the most important thing. Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 7, 2014 Share Posted April 7, 2014 If he can shoot a SBE II he can shoot anything. Out a cheek eez pad on the Stoeger which reduces the hard stock hitting your cheek. Link to comment Share on other sites More sharing options...
tstuart34 Posted April 7, 2014 Share Posted April 7, 2014 The sbe II has the sam3 inertia system as the m2 and they both offer the comfort tech shoch system. Recoil between the stoeger and Benelli would be very comprable. I would go m2 over the sbe II if he doesn't want or need 3 1/2" capabilities. But the Stoeger would also be a good gun. It isn't as pretty in the fit and finish department like a Benelli but it goes boom and will break clays and that is the most important thing. Sent from my SCH-I545 using Tapatalk Thanks Iowashooter. I just did some reading and did not realize that the difference of the M2 and the SBEll was the camber. His dad is looking Benelli because of the Comfort tech system. The kid is a skinny shit and he doesn't want to drop the $$ on a 12gage and then have it hurt him. Link to comment Share on other sites More sharing options...
tstuart34 Posted April 7, 2014 Share Posted April 7, 2014 So how does the EZ kick Butpad compare to the Comfort Tech? Link to comment Share on other sites More sharing options...
Iowashooter Posted April 7, 2014 Share Posted April 7, 2014 That is the main difference but the sbeII has the upper part of the reciever attached to thw barrel so when you take the barrel off the bolt can be lifted out instead of pulking the charging handle out and sliding the bolt out of the front of the reciever. And like jesse said a SBE II is going to be on the hardervrecoiling of the auto loaders. Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
tstuart34 Posted April 7, 2014 Share Posted April 7, 2014 That is the main difference but the sbeII has the upper part of the reciever attached to thw barrel so when you take the barrel off the bolt can be lifted out instead of pulking the charging handle out and sliding the bolt out of the front of the reciever. And like jesse said a SBE II is going to be on the hardervrecoiling of the auto loaders. Sent from my SCH-I545 using Tapatalk So the SBE is going to the be similar to the M3500 then? Even when shooting 2 3/4" shells the recoil will be greater because how the shotgun is set up... Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 7, 2014 Share Posted April 7, 2014 Katie shoots a Benelli. Show dad this and his son will suddenly be tough enough. Link to comment Share on other sites More sharing options...
tstuart34 Posted April 7, 2014 Share Posted April 7, 2014 Katie shoots a Benelli. Show dad this and his son will suddenly be tough enough. haha I will pass it on. Thank you for the info. I think the Stoeger will work really well for what they want just they do not know enough about it. Also they probably have every person in the world telling that the Stoeger is just a chap crappy knock off. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 7, 2014 Share Posted April 7, 2014 (edited) Katie shoots a Benelli. Show dad this and his son will suddenly be tough enough. haha I will pass it on. Thank you for the info. I think the Stoeger will work really well for what they want just they do not know enough about it. Also they probably have every person in the world telling that the Stoeger is just a chap crappy knock off. It is a cheap gun. No doubt about it. It does use the inertia driven system so in a way it is a knock off. But it's not crappy. The SBE and M2 do have a host of great features the M3000 doesn't have. It's all about your budget. Edited April 7, 2014 by Jesse Tischauser Link to comment Share on other sites More sharing options...
BobS761 Posted April 9, 2014 Share Posted April 9, 2014 I just installed a Nordic Components Benelli Nova tube on my dads M3000. The nut fit perfectly without modification. Guess I got lucky. I bought the shotgun about 2 weeks ago from thel local farm store. Link to comment Share on other sites More sharing options...
Glockmeister35 Posted April 9, 2014 Share Posted April 9, 2014 same here. newer M3K and a nova tube threaded on without any tension or grinding. fits 100% perfectly. Link to comment Share on other sites More sharing options...
Ryan N Posted April 11, 2014 Share Posted April 11, 2014 I just ordered the Kick-ezz "magnum" grind to fit pad. It is just a little bit thicker that then standard. Is there any reason to not go with the magnum pad? Link to comment Share on other sites More sharing options...
Steve RA Posted April 11, 2014 Share Posted April 11, 2014 (edited) Finally found one at a local gun shop - $469.95, $509 out the door - 26" barrel. Edited April 11, 2014 by Steve RA Link to comment Share on other sites More sharing options...
BOOM Posted April 11, 2014 Share Posted April 11, 2014 Just a heads up Guys; I Called Soeger to order a replacement part , and they have become very helpful . So don't hesitate to call.there service tech dept. They even called me back to let me know my part had shipped out. ( RIGHT ON STOEGER ) Link to comment Share on other sites More sharing options...
Amr Posted April 11, 2014 Share Posted April 11, 2014 +1 on Stoeger customer service, I launched a spring into orbit and they replaced it without question. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 11, 2014 Share Posted April 11, 2014 (edited) I just ordered the Kick-ezz "magnum" grind to fit pad. It is just a little bit thicker that then standard. Is there any reason to not go with the magnum pad? I don't know if it will fit but the Magnum sounds good! The ladies always smile when the see a magnum in your range bag too. Edited April 11, 2014 by Jesse Tischauser Link to comment Share on other sites More sharing options...
Ryan N Posted April 11, 2014 Share Posted April 11, 2014 (edited) I just ordered the Kick-ezz "magnum" grind to fit pad. It is just a little bit thicker that then standard. Is there any reason to not go with the magnum pad?I don't know if it will fit but the Magnum sounds good! The ladies always smile when the see a magnum in your range bag too. I plan to make it fit. Will post photos.......of the recoil pad, that is. Edited April 11, 2014 by Ryan N Link to comment Share on other sites More sharing options...
ohsevenflhx Posted April 13, 2014 Share Posted April 13, 2014 I polished the magazine tube to a smooth finish, and cleaned up the inside of the bolt carrier with a scotch bright pad. Now it doesn't sound like a zipper when the bolt carrier slides. It is much, much smoother. Link to comment Share on other sites More sharing options...
Oskino Posted April 13, 2014 Share Posted April 13, 2014 (edited) I just ordered the Kick-ezz "magnum" grind to fit pad. It is just a little bit thicker that then standard. Is there any reason to not go with the magnum pad?I don't know if it will fit but the Magnum sounds good! The ladies always smile when the see a magnum in your range bag too. I plan to make it fit. Will post photos.......of the recoil pad, that is. LMAO!!!.... gonna weld up the lifter today Edited April 13, 2014 by Oskino Link to comment Share on other sites More sharing options...
Mike41 Posted April 13, 2014 Share Posted April 13, 2014 ohsevenflhx, How (what tools, materials, method) did you use to polish the tube? Are you polishing the inside of the tube where the shells and spring is or the OD (outside of the tube)? Mike Link to comment Share on other sites More sharing options...
iswope Posted April 13, 2014 Share Posted April 13, 2014 I only polished the outside where the spring rides. Cleaned off the junk that was on there and then took 600 sandpaper to it until it was like a mirror over the entire surface. Lubed it up and reassembled it. Runs nice and smooth now. Sent from my Nexus 7 using Tapatalk Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 13, 2014 Share Posted April 13, 2014 ohsevenflhx, How (what tools, materials, method) did you use to polish the tube? Are you polishing the inside of the tube where the shells and spring is or the OD (outside of the tube)? Mike The inside of the tube is already smooth. I'll take a picture of the part you polish. I think it might be time to start multiple tv greats with all this info in a little more specific format. Link to comment Share on other sites More sharing options...
ohsevenflhx Posted April 13, 2014 Share Posted April 13, 2014 I got my information about the M3000 from this site http://www.thetacticalbay.com/shooters-blog/2014/3/2/taran-tactical-3-gun-ready-stoeger-m3000 Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 13, 2014 Share Posted April 13, 2014 I got my information about the M3000 from this site http://www.thetacticalbay.com/shooters-blog/2014/3/2/taran-tactical-3-gun-ready-stoeger-m3000 Jared is doing some good stuff on the M3k. Link to comment Share on other sites More sharing options...
cajunfighter Posted April 13, 2014 Share Posted April 13, 2014 (edited) I got my information about the M3000 from this site http://www.thetacticalbay.com/shooters-blog/2014/3/2/taran-tactical-3-gun-ready-stoeger-m3000Jared is doing some good stuff on the M3k.Glad you guys are liking the site. We will be doing a whole other video soon with all of MOAs parts.Also just as a heads up for everyone, I used my M3K this weekend at the Texas Multigun Championships and it ran like a champ even with the ridiculous amount of dust we had Edited April 14, 2014 by cajunfighter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now