BBQDawg Posted October 27, 2013 Share Posted October 27, 2013 I mark the head stamp of all my brass that I take to a match with some weird colored Sharpie. If it's marked, people are good about giving it back to you. Also at the end of the shoot, all brass is picked up still on course and easy to spot when they pour it out which ones are mind. Link to comment Share on other sites More sharing options...
BBQDawg Posted October 27, 2013 Share Posted October 27, 2013 (edited) I mark the head stamp of all my brass that I take to a match with some weird colored Sharpie. If it's marked, people are good about giving it back to you. Also at the end of the shoot, all brass is picked up still on course and easy to spot when they pour it out which ones are mind. Edited October 27, 2013 by BBQDawg Link to comment Share on other sites More sharing options...
BBQDawg Posted October 27, 2013 Share Posted October 27, 2013 Sorry for the double post. Can't figure out how to delete second one. Link to comment Share on other sites More sharing options...
TonyK Posted October 27, 2013 Share Posted October 27, 2013 I use a sharpie on the headstamp but think about more than a straight line. I use an odd number of black marks, always get my brass back and no one else goes to the same trouble. Also easy to see quickly in a pile of brass at the end of the match. Link to comment Share on other sites More sharing options...
Naka16 Posted October 28, 2013 Share Posted October 28, 2013 Pink and silver sharpies and make a cross. Maybe will steal the wife's nail polish to make it more permanent Link to comment Share on other sites More sharing options...
BillChunn Posted October 29, 2013 Share Posted October 29, 2013 Red permanent magic marker around the extractor groove. You can pick out your brass by just tipping the cases on thier side. Casehead stays clean as well as the the breechface. BC Link to comment Share on other sites More sharing options...
Steve RA Posted October 29, 2013 Share Posted October 29, 2013 Use .45 small primer brass, people will run over you to give it back. (may not last long as people realize the advantages of only using one primer for everything. - other than large rifle) Link to comment Share on other sites More sharing options...
ppknut Posted November 13, 2013 Share Posted November 13, 2013 I've always marked my brass with colored markers. Just line 'em up in their boxes and stripe the bases No Mark/Stripe - Factory once fired Black Stripe - Twice fired Red Stripe - Three firings Green Stripe - four firings Blue Stripe - five firings Orange Stripe - six firings.....if I ever get this far. The stripes do make it easy to ID your rounds at the range. Link to comment Share on other sites More sharing options...
retarmyaviator Posted November 13, 2013 Share Posted November 13, 2013 Works well for me. Use .45 small primer brass, people will run over you to give it back. (may not last long as people realize the advantages of only using one primer for everything. - other than large rifle) Link to comment Share on other sites More sharing options...
newmexicocrawler Posted December 4, 2013 Share Posted December 4, 2013 I only mark my 223 stuff that way I know what brass needs to be swaged and what does not Link to comment Share on other sites More sharing options...
newmexicocrawler Posted December 4, 2013 Share Posted December 4, 2013 (edited) Double tap..... Edited December 4, 2013 by newmexicocrawler Link to comment Share on other sites More sharing options...
HighCountryStalker Posted December 6, 2013 Share Posted December 6, 2013 I mark mine but for a totally different reason. After working up a bunch of loads in 0.3 gr increments for my 300 win mag I was at the range with the trusty Chrono and organizing my shooting bench. In the process I knocked over the ammo box and now had a mix of all my loads with no way to tell the difference. Totally wasted time and effort. Now I color code them by marking the primers with colored sharpies based on the loads. I can also pick up the brass and look for pressure signs and now exactly what load that was from even out of my AR's. Link to comment Share on other sites More sharing options...
katit Posted December 6, 2013 Share Posted December 6, 2013 Same here. Working up load. One batch - stripe, second batch - two stripes, third batch - plus sign When loading - don't mark at all, if it's my "go to" recepy I don't care if one mixed with other. Link to comment Share on other sites More sharing options...
JohnnyD Posted December 6, 2013 Share Posted December 6, 2013 For pistol all I mark are the military cases so I know the crimp has been removed so I don't have to check it closely. For 223 I usually mark so when I pick up range brass I have an idea what was mine. Link to comment Share on other sites More sharing options...
HighCountryStalker Posted December 9, 2013 Share Posted December 9, 2013 I just figure if its on the ground, its mine. Link to comment Share on other sites More sharing options...
Kraj Posted December 25, 2013 Share Posted December 25, 2013 I just started reloading 9mm Major, to keep it sepaerte from the rest of my 9mm I put black ring around the middle of the case. I use a plastic tray from a box of .380 and just hold the marker to the tray and spin it. Im sure there are faster ways but it works. Link to comment Share on other sites More sharing options...
joestefano Posted December 25, 2013 Share Posted December 25, 2013 This is what I use to mark my brass. THE BRASS MARKER Merry Christmas Link to comment Share on other sites More sharing options...
lakotawarrior Posted January 8, 2014 Share Posted January 8, 2014 When I shoot my AR's I use a brass catcher attached, all the others I use a Caldwell brass trap, you can lay it on the bench or you can attach it to a tripod, I picked it up at Cabelas for $40 ( employee discount), works great and keeps the brass hogs away! Link to comment Share on other sites More sharing options...
RePete Posted January 8, 2014 Share Posted January 8, 2014 I only label the factory boxes with the load info, using 2x4 label. http://www.hwsportsman.net/ReloadLabel.html Usually I don't pickup my brass. Link to comment Share on other sites More sharing options...
OzzieF Posted January 8, 2014 Share Posted January 8, 2014 I've been shooting open for the past 1.5 yrs and supercomp brass is pretty hard to come by. I had been marking my brass with a manual marker which makes it 100x easier to spot after shooting a stage or in practice. A local guy came up with this and I bought one to try. http://www.mrshooter.com/mrshooterbrassmarker.html I can pretty much mark all my brass for a match and practice and not have black/red fingers from the pens. It's super fast and makes marking a lot easier. I'm not affiliated with him and don't get anything from this but just wanted to share what works for me. It's definitely payed itself off by the brass I've saved. Link to comment Share on other sites More sharing options...
BBQDawg Posted January 9, 2014 Share Posted January 9, 2014 I've been shooting open for the past 1.5 yrs and supercomp brass is pretty hard to come by. I had been marking my brass with a manual marker which makes it 100x easier to spot after shooting a stage or in practice. A local guy came up with this and I bought one to try. http://www.mrshooter.com/mrshooterbrassmarker.html I can pretty much mark all my brass for a match and practice and not have black/red fingers from the pens. It's super fast and makes marking a lot easier. I'm not affiliated with him and don't get anything from this but just wanted to share what works for me. It's definitely payed itself off by the brass I've saved. That's the brass marker I use. It does make it easy to spot your brass in a hurry. Most brass are lying on their side and it's difficult to see the markings on the headstamp. You can spot them in a hurry with my red & blue lines on the sides. People even bring me the brass I missed because they know they're mine since I'm the only one in our area using it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now