davester00 Posted February 13, 2010 Share Posted February 13, 2010 So it's time for me to start loading up .223 for plinking out to 100 to 150 yards. the problem is that the Hogdon 335 powder that I wanted to go with is still out of stock. So what powder from http://www.powdervalleyinc.com/ would you recommend for loading. 55grn .22 caliber FJM bullet https://secure3.mooseweb.com/montanagoldbullet.com/pricelist.tpl PMC brass Remington 7 1/2 small rifle bench rest primer for a noveske 14.5" length barrel w/ 1/7 twist the rules are it has to be from powder valley. I would like to order about 16lbs : http://www.powdervalleyinc.com/ Please specify powder / suggested charge and C.O.L My initial guess is to purchase the Hogdon Benchmark powder in 2 8lbs jugs. Thank You. David Link to comment Share on other sites More sharing options...
shepheard Posted February 13, 2010 Share Posted February 13, 2010 I have used Benchmark, Varget, H4895, H322 and H335. I save my Varget for heavier loads,69 and up. Varget still shot the 55 real good. I hear Benchmark is good for lighter bullets as well as H335. You can't go wrong with Varget for the 223. I seated my rounds to the crimp groove. I was using Lapua 55fmj. AR15.com has tons of info for the AR platform and reloading. Link to comment Share on other sites More sharing options...
DocMcG Posted February 13, 2010 Share Posted February 13, 2010 A BIG +1 on the Varget! How does that 55gr perform out of the 1 and 7 twist? Just curious. Kyle Link to comment Share on other sites More sharing options...
mildot1 Posted February 13, 2010 Share Posted February 13, 2010 I shot a LOT of 55gr Sierra Blitz Kings out my Wylde match 1-7 AR, they performed very well. It was explained to me by Bill that years ago they had the barrels that would work but the bullets available at that time could not stand the twist rate. His opinion was it is almost impossible to overspin a good bullet. H335 is a very good choice and if I can't get that I would try the varget. Good Luck Link to comment Share on other sites More sharing options...
CocoBolo Posted February 13, 2010 Share Posted February 13, 2010 (edited) I use BLC(2) with 55gr Hornady FMJBT. I worked up loads from 26gr in steps to 28.1gr, the best groups happened at 27gr. Some brass was not able to take the pressure of 28.1gr so I would not go that high. I dropped the oal idea and went with seating that just barley exposes the edge of the cannalure, this helped accuracy. The recommended OAL hit mid cannalure and was all over the place. Edited February 13, 2010 by CocoBolo Link to comment Share on other sites More sharing options...
barney88pdc Posted February 16, 2010 Share Posted February 16, 2010 With that short of a barrel the H322 might be a better choice than the H335. If you can find that I would pick some up. Varget has a tendency to bridge over in a progressive and may not meter as well. YMMV Link to comment Share on other sites More sharing options...
JACKAL Posted February 16, 2010 Share Posted February 16, 2010 Varget is a good choice along with H335. Another is TAC. Link to comment Share on other sites More sharing options...
redmanfixit Posted February 16, 2010 Share Posted February 16, 2010 Presumably, you're loading for a bolt gun. If so, consider Winchester 748. Years ago, I bought this really nice Remington called a Sportsman 78. I worked up a load for it using 28gr of 748 with a 52gr Blitz and adjusted the length so that the ogive of the bullet was about .002 off the rifling. Freakin' thing is a tack driver!! Sierra says you aren't supposed to drive that line of bullets very fast, but in that rifle, I never had any trouble with bullet instability that I could ascertain. No pressure sign to speak of. Primer flattens out but no cratering. I won't say what the velocities I was getting were like because it was a long time ago I checked them. I will tell you though, I started hunting prairie dogs when I was very young and growing up in Kansas. I am sure there's a prairie dog "personal accountability team" in a burrow out there somewhere and my likeness is on the wall in the ready room. Can you say "Detonation" boys and girls...I Knew you could! Link to comment Share on other sites More sharing options...
steel1212 Posted February 16, 2010 Share Posted February 16, 2010 I use benchmark for all loads 223. Its a little faster than varget and I don't use to many bullets above 69 for what I do with the poodle shooter. Its also smaller than varget so it meters a little better. Link to comment Share on other sites More sharing options...
Brooks Posted February 16, 2010 Share Posted February 16, 2010 I use H335 in my .223 loads. Link to comment Share on other sites More sharing options...
twodownzero Posted February 16, 2010 Share Posted February 16, 2010 Do you guys' loads with 55 grain bullets make minor out of a 14.5"? I've been shooting a 16" for years and recently switched to a 14.5". I haven't chronoed my loads yet to see if my typical 25 grains of WC-844 or H335 will make minor with a 55 grain bullet! To the OP, consider BLC-2. It's almost the same as H335 and will do the same thing. Link to comment Share on other sites More sharing options...
Religious Shooter Posted February 16, 2010 Share Posted February 16, 2010 I use TAC for 55's. Cheap and it meters well. Link to comment Share on other sites More sharing options...
Graham Smith Posted February 16, 2010 Share Posted February 16, 2010 Won't barrel length play a big part in this choice? I would think that for such a short barrel you would want the fastest powder that would work for a 55gr .223 Link to comment Share on other sites More sharing options...
Flexmoney Posted February 16, 2010 Share Posted February 16, 2010 Mod note: I moved the thread to the non-BEginner loading area. When we get into specifics, the topic is better served in the dedicated area. Link to comment Share on other sites More sharing options...
ManNamedJed Posted February 16, 2010 Share Posted February 16, 2010 I switched from 335 to Tac. It meters well, is cheap, and seems a bit more accurate. Link to comment Share on other sites More sharing options...
freakshow10mm Posted February 17, 2010 Share Posted February 17, 2010 TAC is my choice. Cheaper and gives same or faster velocity and accuracy as Varget. Meters a lot better too. Link to comment Share on other sites More sharing options...
Steve_P Posted February 17, 2010 Share Posted February 17, 2010 Another vote here for TAC. I have been able to develop a bit of velocity without pressure signs. This may help when trying to make minor from the short barrel. Good luck. Steve Link to comment Share on other sites More sharing options...
Mitch Harrington Posted February 19, 2010 Share Posted February 19, 2010 I've been using 24gr. of AA2230 under a 55gr. Hornady FMJBT bullet. It's works great as my 50 yard zero is the same as my 200 yard zero. I know Powder Valley has it cuz that's where I bought it! Link to comment Share on other sites More sharing options...
barney88pdc Posted February 19, 2010 Share Posted February 19, 2010 Won't barrel length play a big part in this choice? I would think that for such a short barrel you would want the fastest powder that would work for a 55gr .223 Yes it will and you hit the nail on the head. Hence my earlier suggestion of H322. All of the powders listed in here are common for .223 but some would be better suited for bolt guns with longer barrels. Also powder type (ball, stick, flake) would also be a consideration if the OP is loading with a progressive press which is throwing the charge as opposed to weighing each by hand. Link to comment Share on other sites More sharing options...
duncan Posted February 20, 2010 Share Posted February 20, 2010 The 16" guns I have do fine with 335. I get some pretty sporty velocities with it when I need them. Link to comment Share on other sites More sharing options...
badmonkey Posted February 24, 2010 Share Posted February 24, 2010 Hay guys-n-gals new to the forum but not to 223. win 748 and Sierra 40gr BlitzKings or Nosler 40gr Spitzers. Thay work very well on P-dogs the Sierras turn them in to red mist and the Noslers in to bite size chunks. O-YA the 55gr in both work good on yotes Erik Runyan Link to comment Share on other sites More sharing options...
davester00 Posted March 5, 2010 Author Share Posted March 5, 2010 I went with Varget. Has anyone experienced that 26.5 grns of varget will almost fill up to the top of .223 PMC brass? Am I correct in assuming that Varget was designed to run as a compressed load also? Fill me in. Link to comment Share on other sites More sharing options...
Religious Shooter Posted March 5, 2010 Share Posted March 5, 2010 Varget!!?!?!? ... for 55's?????? Link to comment Share on other sites More sharing options...
RiggerJJ Posted March 5, 2010 Share Posted March 5, 2010 I went with Varget. Has anyone experienced that 26.5 grns of varget will almost fill up to the top of .223 PMC brass? Am I correct in assuming that Varget was designed to run as a compressed load also? Fill me in. Varget most assuredly will over-fill the case with 26.5gns. Thats why most don't use Varget for bullets under 62gn. It spills all over the press and you will get uneven loads because of the spillage. Its not that Varget isn't the powder for 55s, its just too bulky for the amount needed to get the 55s up to speed. for 55 FMJs I use 2230, 25.0 gns, and get ok accuracy with them because they are FMJs. AA2230 was made for 223 52 & 55gn (even up to 62s) bullets in ARs. If I was shooting 55 or 52 gn JHPs for long range I'd still use 2230, but for long range shots I use 68gn JHPs with 25.0gn Varget. I like the way they push steel around and don't get pushed around by the wind as much. for 55gn bullets you have these many choices from this thread. These are not all of the powders you could use, but I'll bet that you find one of these will work better for 55gn bullets than Varget. H332 H335 Win 748 AA2230 Tac jj Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now