DBX1987

I'd rather not... since you just voted yourself into possession of illegal magazines... Belgium law clearly states that only IPSC shooters (= active membership) have the right to possess <171mm HG magazines, otherwise you are restricted to 20 round mags for HG. Regarding the lawmaking and speed and f*#kery lately, I'd rather keep it as is... Germany already got f*#ked with their HG and PCC magazines...

Horrible engineered safety's is the reason. I've had one break the plunjer installed, eating the frame before I knew it. On my new gun the safety plunjer went out to far, couldn't reinstall it. Then a bit later the plunjer launched itself ... Quality control is all over the place with the safety's, a mechanical indent holds them in place. This is always the issue

Yes, Buddy of mine was really interested but LH. Apparently it's KMR proprietary, it was far out from releasing.

True, all cz's on the booth had roll creep in SA as well. Then again, there was a Tanfo with a stock hammer that was really nice, while mine on the OR was pure garbage. I was throwing in a Unica anyway so didn't bother about it. KMR's are really nice, but they need LH extended safety, which are still a long way out.(2 years aprox). Phoenix is nice as well, but the price is to much. Even KMR is expensive, around 3k for a production gun, around 4,5k for a Drake production. No thanks... I'll stick to my Tanfo's, and my buddies to their CZ's

Explain to me how the hammer can transfer any momentum to the FP when it is resting against the FP and the FP stop plate when dropped. The FP is still far from flush with the breach face in that position.... I'd pbb carry a cz shadow 2 compact if I could.

Isn't one large frame and the other small frame?

Everyone started shooting shadow 2's because of the price. You could buy a shadow 2 for 930 to 970€ at 2017-2018. While a tanfo is still around the same price it was back then. I've got 3 different generations and they all are fine to me. The only difference is beavertail rounding. Which has small differences between them. I was doing equipment check's a while ago on a match, and had around 4 recent shadow 2's, that moved the sear cage all over the place when the safety was engaged and the trigger was pressed..... One was brand new and stock...

Is it a large frame? My OR grips are spot on. So are all my other stock 2 factory grips. I've only have Quality issues with armanov grips wich aren't perfect and have a slight gap at the front of the grip meeting the frame(différent sides, while originals are all perfect flat). All mine are SF. I can hardly believe those are fitted at Factory ! Looks like s#!t

I see some guys running Toni systems extended basepads +9 on czechmates, they run well. Would be my option for Tanfo

Am thinking exactly the same. Ts2 orange and limited do feel differently though. One is heavy on the front and grip feels larger, might be that xtremely high placed safety which I didn't like. The other is nimble and balanced.

All models from 2022 are cut different then before and have one xtra mounting screw. The iron sights and multi dot adapter plate are part from the pistol kit. Pre 2022 OR models cannot install the iron sight plate since the cut is different.

What do you want us to say? Clearly you have made up your mind already. The only thing he can do is narrow the frame to the slide by hammering or pressing. The barrel lugs on top fit or not, there are no lugs to cut at the bottom or links to play with like a 2011. Personally I wouldn't even cerakote it, unless you got it cut for an optic, it's a race gun. It will get beat up... In the long run you will probably get a Stock 2, Stock 3 Pro, or a shadow 2. It's not the guys with a nice fancy looking gun I'm afraid of, it's those with banged up mag pouches, holsters and guns that show their use... Like I've said above, hammer, xtreme sear, springs, and all the rest is optional to test out later.

No reason for it, I've got 3 stock 2's and my oldest has close to 100k Rounds and still is accurate at 25m. The frame can be tightened to the slide, but I would never do it. My new one is hardchrome and slightly tighter but just build it to my prefered specs and maybe only shot 350 Rounds so far. Don't bother tuning a 2 piece sear and standard hammer (my latest had horrible creep), buy a Xtreme sear and titan or heavy Unica hammer and be done with it.

For what it's worth, mine was a 2 piece sear, small frame version BY 2022.

The new slide cuts are stroked. I've got a new one, but I still need to change parts to the same config as my other guns (out of the shop this trigger was horrible) It shot smoother/softer the one time I testfired it, I think it was the medium hammer spring compared to the light ones that I normally run, recoil spring was the same. Might also be the fitment, this one has almost no play, my main match gun has quite some play by now.

Short reset disco's don't matter, you ride your reset. If you don't, better work on that. DA swing can be perfectly tuned like where you want it, it's all done by working on the wing and the feet of the disco. My prime match gun's DA goes as far back just before the SA hammerhooks.

Rts2 is getting a bad rep here in Europe. Most guys are switching to delta optical or other rts2 coppy. They are cheaper and last longer

Got a link?

Replace the sear it looks worn, I've got a worn in sear with a Unica hammer and it still fires perfectly but you might be out of luck. Unica hammer hooks are way smaller. Other issues might be sear reset. Check that they triggerbar can move downwards to reset when racking the slide. FPB Will needs some adjustment with Unica Parts since the timing is slightly different compared to delta/titan hammer.(different geometry)

The sear has nothing to do with DA. He just needs a disco and pin.

Bul tbh... I've know folks shooting SPS, STI (pre DVC), custom Guns. Major PF standard or open, but I've seen none crack as frequent or fail at low round count.

I have it from one of the distributors in Europe that they keep cracking. Not the greatest track record on cracked slides/frames either.

Is this a LF or SF, because I've seen both been sold in germany. The only problem I only ever had was SA dropping in DA when fitting a Unica hammer. In an xtreme stock 2. (had to do allot of disco grinding to get it to clear the SA drop) Originally I've had a Titan hammer and it was installed by grauffel's gunsmith Sebastien, there was some modification done to the disco there aswell. FYI for the guys reading ,the UNICA sear is longer as the xtreme one and increases the throw arc of SA by 1.2mm. Also this one needs fitting to engage the safety when used in an xtreme gun. I always modify the FPB to the moment the hammer hooks let go. At that moment the firing pin is free. I'm running a 10 pounds spring on an old Sframe (non stroked, the new ones are). The only moment I get stovepipes are when the gun is very dirty and badly oiled and/or shooting one handed with a bad grip. Running standard extraction spring, 145gr ammo. If you are at the Infinity open (Philipsburg) next month I could have a look at it.

Only models after 2021 come with the iron sight plate. The milling is different aswell. You cannot upgrade a pre 21 model with iron sights. Atleast that's what I could make up from the google translated mail XD...

Truth it these poly barrels keep going. My accuracy was still top notch. There's people with 195K rounds on these and then the barrel snapped in two.