magpulled

Item # 10522(I think) 13 coil spring and follower kit from czc and basepads. Atleast that's what I did. Spring/follower runs 17ish$ and basepads are like 40 each.

Grip reduction and undercut beaver tail and trigger guard, cut frame a little and slide lightened. Added flat trigger, adjustable rear and fiber front. Thumb rest and czc wide LHS.

I was there. I usually go to the back 40 when I shoot. I left about 3:30. Come shoot Sunday and I'll bring it but will shoot production because I'm having holster issues.

I took it to a belt sander after lunch yesterday and a couple passes later it's perfect. Thanks for he input. Headed to the range today and gonna try out new springs and break it in a little. The slide to frame fit is a little tight from the cerakote.

Garmil there was a little more room further out but the rest was installed first and the wide safety was an after thought. I can move it back and just use two screws but it's a stretch when I do that. Guess it really depends on grip and hand size.

Thanks bus driver. That does give me an idea of what needs to be done

I just had a thumb rest and czc wide safety on my TS. The problem is that there isn't really enough room to disengage the safety while riding the thumb rest. Has anyone encountered this issue before. Trying to decide if I should remove some material off the safety or just go back to stock. Let me know what yalls thoughts are.

A buddy traded me one he picked up off a prize table and lonestar innovations made it. It has just been installed with the czc wide left safety and there is not much room to use the rest and disengage the safety. I'm planning on removing some material off the safety or go back to stock safety. The thumb is good though. Not much help here but if you plan on the wide safety make sure the rest and safety fit good together.

Dawson's new style base pads for the etm mags are a good bit wider than the previous model. A buddy just got some for his mags and they are much wider than the ones I bought a year or so back.

I've picked up range brass with this mark and have found that most won't case gage in my Dillon gage. Seems to screw up the rim enough to keep it from passing.

Hopefully not 23 weeks haha

I'm having mine done now. Just simple cut on top like a glock 35 or xdm 5.25

That would definitely do it.

1000 grit sandpaper. Hit the edges of the mag with a little oil and they slip right on. Atleast for me. Just need to get rid of the sharp edges.

I've got both. Shockbottle seem to be made a little better. Springer are a softer metal I think because they scar up easier when dropping in gravel and other hard material. I like them both.

I'm having trouble viewing the photos. Can you post the link again. Says no albums found. How much you charge and what other work do y'all do.

I load 3.1 of TG at 1.135 with fed primers and get 132 pf but I also have an Aussie barrel but it only adds a few feet per second.

I sort pistol brass only b/c my oal is more consistent when I do so. I use a loadmaster (it was 120$ new set up to load ) and I haven't had any issues, knock on wood.

Shooters cast bullets. I'll see if I can find a link.

My TS trigger pull is less than two pounds and I've got an RO with all egw fire control parts and its two pounds too. The RO is a little better but it's not much. The factory TS trigger is phenomenal. A few ppl who've shot my TS couldn't believe how good it is.

You should be getting 20 9MM in an OEM mag. 21 in a .40 cal is with an extension and CZ Custom spring/follower. I only get 20 in my 40 mags too. I have czc base pad and spring/follower kits too. I must be doin something wrong.