Prebaned

Well if you want exact, powder coat is the only way. The cats out of the bag. Mollycoddle blue PWS-3016/Wrinkle Prismatic powders. The twist is, they have "discontinued" this color. Read into that as much as you like, but it's pretty obvious they have been tapped by the powers to be. Sent from my SM-G892A using Tapatalk

Baffle over a baffle has no real advantage on all powders I have tried.

Anyone know the correct 10mm frame feed ramp angle? Sent from my SAMSUNG-SM-G890A using Tapatalk

Wolf 55gr. value is hard to beat. Sent from my SAMSUNG-SM-G890A using Tapatalk

Why buy any pins? I have three Lee universal decappers and break one every so often. I take a picture of it and send off a email to Lee every time and get a new one mailed free of charge in three days. Sent from my SAMSUNG-SM-G890A using Tapatalk

The gun is a coworkers new 1911 loaded Springfield. Load is 230gr. plated over 4.7gr Titegroup. What's the deal with the mark on the right side. Everyone gets the mark. Sent from my SAMSUNG-SM-G890A using Tapatalk

The Lee FCD does this on my XL650 with pistol rounds. The more flare the worse shavings. Affects nothing but leave as mess. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

Looks like a $13.00 solution looking for a nonexistent problem. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

If you know what parts you need just fire off an email this way you won't have to waste any time on the phone. I always sent an email with a photo of what part failed and usually within 24 hours I had an email saying my parts free of charge are on the way. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

The Redding Comp Pro seating die is all I use in all my rifle and pistol calibers on my XL650 The Forster die is just as nice and cheaper but not quite long enough to touch the shell plate when using a Hornady lock ring on top. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

Hard to beat H335 for .223 and 308. Cheap, available and works well on both. Staying on the cheap Wideners has 2000 30CAL FMJBT M80 Bullets $389.00 FREE USPS FLAT RATE S/H They are NOT pulls. Brand new shinny bullets. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

I'd like to have a chat with whomever thought this one up. I used to hate this thought also, very much actually.Someone enlightened me to rethink the idea of SPP .45acp since it was actually developed originally as a SPP self contained metallic cartridge. Most people will give away SPP 45acp and some will double your brass trade for the SPP .45acp. Sounds good but this is what is making me rethink my hatred for the SPP .45acp. I load .45acp, .40S&W, 9MM Luger and .223/5.56MM How nice and cost/storage effective it would be to have one size/type pistol primer? Only having to hunt SPP primers and no cross over to larger primer system on the press. In a pinch I can use the small rifle primers on the pistol brass. It could be good. I may become one with it. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

Had a similar issue and this fixed it 100%. Ditch the funnel. The metal should be closed up more, much more. Take the drop tube out and flare the inside to almost a point at the edge. The factory flare was extremely non concentric and shallow on mine. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

This will set you free. Sent painfully from my iPhone 5 using Tapatalk Live long and free or die

This is true. You need to buy nothing for .223 and .45acp. The machine will come with both small and large bars.Sent painfully from my iPhone 5 using Tapatalk Live long and free or die