CZ85Combat

For 1 thing the CZ will run. I could not tell you how many times in a match I have seen the others have a malfunction. My son & I both shoot CZ T S in .40 S&W they just run. All you have to do is look around at the matches, at some point in a 6-10 stage match you will see them taping, racking & clearing the jams. This is just what I have seen. YMMV CZ T S was Was designed for limited division. Out of the box you will have a 2 pound or less trigger. Enhancements you might want to consider. from CZ customs: competition hammer , extended magazine base, extra power Springs and follower, this will allow you to load 20 rounds in the mag and a mag well. Comes with 3 mags so you will want to pick up 2 extras.

You can get a throat reamer for about $70.00. Call your local gun smiths in your area, most will charge about $50.00 to ream the throat on your barrel . CZ makes the throat short because it was designed for the European market and the only type of ammo they are allowed to use is round nose.... so no need to make the throat any longer.

When I talked to Manny he didn't think the holster would fit a TS. That was some time ago though, but I would still check before I ordere. Me and my son use this with our TS

This is the 1 to get. Futuristic Magnetic by Manny Bragg http://www.mannyusa.com/Firearms_Training/product/Futuristic_Magnetic.html You can look at this post http://www.brianenos.com/forums/index.php?showtopic=159771

The load was....10 rounds MG 124 JHP 4.4gn of N330 OAL 1.100 AV 1029 ES 20 SD 7 1" group. Target at 45' from the bench + 8'-10' to the ransom rest that is mounted to a 400-500 lb steel pedestal bolted to the concrete floor behind the bench. Sadly I don't think they import N330 any more.

In my Accu Shadow ran MG 124 jhps at 1.080-1.100 with no problems. I did get a reamer and reamed the throat of my Accu Shadow, CZ85C, Pro-Tek II, Rami, Son's SP01 Shadow, Rami & CZ75 Shadow T. They were all reamed to the same depth, about +.040-.050. We can now load MG 124 jhps to 1.145 if we want. We usually load to an OAL of 1.120. I tested my Accu Shadow on a Ransom rest for accuracy before and after the barrel was reamed. I found no difference in group size.

look for N320, Burns clean & recoil is soft. down fall is it cost more and is hard to find. If you find it buy what you can, If you don't like it you can sell it (you will have people beating down your door to buy it from you).

You don't pull bullets with pliers! you get a bullet puller. are you using a taper crimp Or a factory crimp die? If you are using a factory crimp die, get rid of it and get a taper crimp die.

try a 14 or 15lb spring

The Accu is not other cz75 design, it is a modified design. The fact that you had to modify the guide rod should tell you some thing. I believe if you do a search you will find a post that was asked about removing the guide rod from the Accu-shadow when they first came out. cz customs stated that you remove/ turn the bushing to remove the guide rod.

With the Accu Shadow you do not remove the guide rod with the bushing installed! You are supposed to remove the Accu Bushing , this allows the barrel and the guide rod and spring to come out very easily.

I ordered 32,000 one time. I was home at the time & went out to the truck, was told that me order was left at the post office.... it's to heavy & to many boxes. Got the green slip. When I went to the post office I asked for the Post Master, they get paid to deliver as long as the box is under 70lb. After my talk with the Post Master, My bullet orders are delivered to my door.

SP01 Shadow .356, Cz85 Combat .356

Get the Boss DOH holster from Ben Stoeger Belt, Holster & 5x Ghost mag pouches. IMO cant get any better then this.

Tactical Sport 40 S&W was designed for limited class

With target loads, drop the Recoil Spring to 11lb,12lb or 13lb. they are cheap so you can try each one.

you might want to look in the CZ forum http://www.czfirearms.us/index.php?board=23.0

It can not be the sizing die, it was already shot. You are talking about ejection of a fired case. I would think it would have to be a dirty gun or extractor.

http://www.thebluebullets.com/

I took Ben's class last October, It is a good class!

this will stop the safety from being able to be engaged with the hammer down. AS-B - CGW's exclusive adjustable billet sear. Made from premium high carbon steel, heat treated, and mirror polished. Makes installation of the CZC Competition hammer or CGW's Race hammer fool-proof and effortless.

+1 Nothing close E3......but now it is hard to find. You can follow Powder Valley on face book to get a heads up on when N320 comes in. just got 16lb. last month. https://www.facebook.com/pages/Powder-Valley/114579301922351

This seams to be the best holster IMHO http://www.benstoegerproshop.com/BSPS-BOSS-DOH-Holster-Systems-p/bsps-holster.htm Pouches http://www.benstoegerproshop.com/Ghost-360-Universal-Magazine-Pouch-SG-MAG-p/sg-mag.htm

maybe I read his original post wrong, the reference to blue bullets was to the original post statement that Xtremes bullets were the same price as coated bullets, not to the cost of other coated bullets.

I have not seen any plated that matched the price of Blue Bullets. http://www.thebluebullets.com/