jjw

he does not own anything i am sure all military "issue". has paper work to carry off base. my work gun is a 12.5" my 3gun is a 14.5 with a s&b ffp. for real world work also just carry the upper at work carry 11.5 with m-4-s and pac-15 and can every day. 14.5 is a spr for me. good to 350 yards. for nasty things at nite with same can same frame ,nods same ammo. mu required ammo is 75 gr tap so i am gtg inside 100 meters its 55gr for match. not as easy to get. works for me never have been to a match where a longer bbl would have made me shoot better. l.o.l. jjw

i ma pretty seure i have soem factory 10 rd'rs i got during the ban if u need several u are welcome (free) just email me an address i can mail to no worries jjw

is 7.62x39 legal in heavy metal. i have several that function perfectly and have all the rest of the gear. i am putting together a .308 but am not excited about the cartridge for what i do. the rules always say 7.62. they usually dont finish it to say 7.62x39 is/ is not legal if it isn't why can't we put it in its a lot of new people gun and will become a lot more popular than the 300 blk any way to legally shoot this cartridge would be helpful tks jjw

vtac makes a small mount a little more but the best going midswasy's will work just dremel a small bit out of the rail and esay to do good luck jjw

moly coating is bad thing in mp-5's has that polygonal barrel thingy. tks to all vigilante solvrd my problem. had some israeli black tip of thatstuff years ago was a smoker but did the job kjust not quiet. tks again all jjw

does anyone make a 9mm cjb bullet heavier than 147. i need to reload some for a 9mm can and various 9mm carbines it fits i CAN NOT SHOOT LEAD thru a can. bad juju i am an experienced re loader this is not a beginners idea. just cant find the bullets need 5-10k sitting on tons of 1f brass powder of choice primers hav lots of 9mm carbines and sub guns kel tec baretta storm colt 9mm 8" upper for an sbr mp-5 sure cant shoot lead in that big kaboom. my real world load is 147 speer gdhp. workd perfectly just damned spendy. once i develop a load that runs the guns and is silent i will just load up a ton and throw thenm in a bucket in my work room t.i.a. jjw

i have a similar system on my daily work gun when i am out of country 12.5" d.d lite wt bbl larue w/ s&b 1-4 ffp on the right side at the start of the forearm is a aim point h-1 (4 moa) mounted in a Laure offset works for me anytime i need the appropriate sight good luck jjw p.s. use it to shoot 3 gun. just take the aimpoint off. depends on the far targets. shoot a lot where the furtherest is less than 250. if that is the range i use a standard eotec. (little 1 with 1moa) and a different gun/ 11..5 bbl. both of these are gtg where ever i am

shoot what ever u shoot best meaning what can u use smoothly w/o a lot of confusion on the clock in a running match against a clock i have shot both and a lot of outlaw.fr benning and all the rock castle's. i am not a major player but use a lot of my work gear i shoot eotechs in comp but use aim points at work.(security company on govt contract) remember in a stress situation u will do what u have ALWAYS DONE hope this helps. good luck jjw

those dont even look comfortable i use the cablea's tac vest its in the mens clothing area. it is long enuff to cover the weapon. up to size 5-x i used the 511 because at 1 time i was a big military distb till i went to woolrich like their clothing and sell a ton dont like their vest and they wont re-design. t/t them at every shot show. no 1 cares small issue fora huge nice company. 511- heavy hot woolrich run small careful there cabella's run true to size good pockets good cost i use it and pay retail. (that sucks) but its the best for long term use cheers jjw

rifles: surefire pricey best in the world. built for machne guns. knac hard to find but shoot forever. heavy pistols: center fire -- gemtec raptor-2 with enhancer gadget .22;s -- gemtech outback-2 take apart shotty dont know dont live in england l.o.l. quick lok foirmat on ar's screw on is good but slow screw on's on pistols only way to go. this is F.N.V PRODUCT if u havent used them dont anwer, i heard,read, on the internet..and yes i have all these in my bag. for work guns. do it over ??? same same. lots of othersgood 1's. these are tried and true by guys shooting 100,000's of rds in real world. ask i am around jjw

a heat gun is ur friend i use the bladetec with the spacer under my work web gear when i am carrying a lot of crap i use heat gun. u have to really be patien but u can do it no problem. just takes time bend it very SLOWLY SAY OVER SLOWLY or it will snap. mine is acttied perfectly upright now. no dragging againest my elbow,really annoying. ask i am around for a while jjw

Actually a .22 is hard on the hammers because the bolt hits the hammer at a steep angle. (90 degrees vs much less on a ramped .223 carrier) I have broken a few hammer pins on my .22 Spikes over the years and seen it happen on other .22 ar's. The only triggers I run on .22 ar's are GI style because in generally .22 uppers won't run right with match triggers in my experience. Pat hey alaska: it s a spikes. never got anyhitng form them that worked. people are not nice either. woman who answers the phone is rude and wont let u speak to a tech, who are sharp but its crap gear. cant belive ur works my 3 didnt jjw

try this: decide what distance u will consistantly shoot. u can hit any target i have ever seen out to 300 yds with the eotec/type site. i like them and shoot them in 3 gun a lot. i shot it at rock castle 1st year and shot fine. i usea 11.5" bbl in work(so not relevent ) with an aimpoint. i al;so have a spare upper with a s&b short dot 2fp,with aim point h-1 IN 4 MOA ONLY). if i ineed to shoot long range,seldom. (we are an overseas security company on contract to govt. if u decide to go the way u are thinking put a GOOD 2-4 moa red dot up over the forend at th REAR of the fornend at the delta ring area. get a larue ofset mount. mount the lock on the top rail and the h-1 should be just at 1:00. u are gtg. i am an aimpoiny dealer and i sell a lot of h-1's to shooters but they always come back for ther 4 moa AFTER buying the 2 moa. even tho i tried to talk them out of the 2 moa for this dcomcept i sell a lot of big time match shooters who are friends. h-1 is for 100 yds and in. this works for a lot of my guys and we all use a variety of gear inside reasonable parameters. also i have bi focals and an astigmatism. ask i am around jjw

sorry bout that who is sss ?? web site ?? , sponser ????? tia jjw

on anything with rock river on it i am not surprised on a GOOD ar u wont have a problem. i have several tac sol complete uppers from 6" to 16" shoot them on any of my guns. tactical machining lowers. Daniel defense uppers usually. my 3 gun is an old colt 1/9 skinny shot 5 k thru it in .22. cant shoot any more. dont have time. take i the 6" upper with me. use on my work lower with a giessle sgl stage.over seas a lot.plink at pigeons off the embassy roof at nite. with a gemtech sea hunter titanium "can,"clean about ever3oo Rd's. hope this helps. u couldn't run fast enough to give me anything by r/r to bet my life on techs are morons also. ..cheers jjw

u get 2 slim wafers marked u or p use the "u" wafer on the light works on mine. i am also a surefire dealer and i sell ton of these. and its always confusing. trial and error was how i learned. some guns will need a different wafer good luck jjw

thank you very much jjw

been looking for a 18.5 bbl with chokes found an m-2 BUUUUT my gun is an old m-1 form the late 80's early 90's will it fit. can find a sold answer. yes no maybe grind a little can someone who ACTUALLY KNOWS's the answer tell me what so. i need to get this guy off the hook if not doable. note: have a full line tool and die factory trained gun smith who does all great work. he nor i are familiar with bellelli's quirks thanks in advance jjw

having to buy 10 of them and i am paying 200.00 ea no choice on price / quantity. can spare 1 or 2 if u need 1. web site is higher but no way of knowing what the "street price" is. no 1 i know uses them. we all use colt or g.i.. b.l. farley (jjw) blf@odspec.com email me direct NOT THRU HERE. give me a phone number i will call. if u want to to buy 1 at my cost +ur frt i only needed 4-5 for spares. got caught short when the panic hit. good luck

its easy to do if the holes line up if not a drill bit and a dremel ar ur friend use the belt slot on holsters but the tec lok on mag p. easy as i said email me direct if it is something i am missing here. i only use blade-tec for work or play jjw

are they any good need some info asap have a chance to buy some and i have always run colt.never use anything else. read web site. know nickle born as its on my 5x45x39 upper. clean and runs flawlessly. interested in reliability cycle life maintenance should not be an issue. any info and help would be helpful thank you jjw

same stock they bought ace about 3 yrs ago. jesse is a real ethical person he is not into 3 gun but he is a good company to buy form and his stuff works. return it if it fails jjw