Yagi

your round may be too long... try 1.100"

Gump, What's the oal you are using on the 135's? We just tested some Stock III's , the same batch you got... No problems whatever bullets we feed...147, 135, 124, 115..

Kinda looks like this... http://www.123rf.com/photo_801718_beautiful-woman-peers-out-from-behind-blinds.html

The small frames are the rarest... Both Stock 2 & Stock 3...Even Graufell was shocked when i told him small frame, let alone twins... =)

Buy what you can get .... Either a Lim Pro, Stock 3 or Stock 2....Hope that helps your dilemma...

All Alpha's are 5 points ..... Stock 3 is fast shooting. Lim Pro is Quicker. Stock II is the fastest... Pick your poison =)

i dont run thumbrest in my lim pro... =(

Ramshot Competition. It is the same in my testing.... 4.1gr 1.1-1.130 OAL 124gr

in my opinion, if you dont intend to shoot nationals.. then by all means go with minor. but if you are, go with major....the reason being is that national level matches have a well balanced array. if its just a level 1 or level 2 i always see the advantage of using a minor 10 round.

I find small pistol magnums are a little bit hotter than small rifle...very minimal..

I must've ordered the same time as you... I'm in my last 8-lb jug... =(

slow burning means more grains to your load. plus the recoil impulse is different.

Look up some loads for n320. It is the same in my testing.... 4.1gr 1.1-1.130 OAL 124gr

Call EAA... They have these...

What are you looking for?

No need. But then again it is everyones preference.

It does not bite too (at times )..

Listen to him (Torogi). He is one heck of a Tanfo Tuner....

why not buy a cz sear spring?

you need this one ...https://www.lastroundarmament.com/product/henning-trigger-plunger-spring-set-for-eaatanfoglio/

you need to use this kind of sear... https://www.lastroundarmament.com/product/eaa-9-1-1-piece-sear/

Order the Stock 3 Blade-tech Holster so you can use it for : Stock 2 Stock 3 Limited Pro Limited =)

i have friends with over 50k rounds with stock slide stop....if you really need to bring spare parts it will be fiber optic, trigger return spring, sear spring...

The search option is your friend.... your typical mods will be recoil spring, guiderod and misc. springs... be aquainted with mr. flitz....

i have felt a stock 2 that has one of those cz disconnector. if i am comparing it with an xtreme trigger and a stock disconnector .. the reset is almost the same..take a pick...