greatlakes08 Posted April 5, 2020 Share Posted April 5, 2020 Does anyone have experience with one of these? https://www.ebay.com/itm/Bullet-Feeder-for-Dillon-XL650-XL750-by-SD-9mm-40SW-and-45ACP/323983453561 Link to comment Share on other sites More sharing options...
lonestardiver Posted April 5, 2020 Share Posted April 5, 2020 Does anyone have experience with one of these? https://www.ebay.com/itm/Bullet-Feeder-for-Dillon-XL650-XL750-by-SD-9mm-40SW-and-45ACP/323983453561No personal experience.Several things jump out at me....price $149, home made, unused, tested, location Slovenia. Granted it says 1 year warranty but will you get it?How long will shipping take to get it to you?Is it in-stock ready to go or is it built to order?So it is about $204 shipped not counting any taxes or such. Link to comment Share on other sites More sharing options...
greatlakes08 Posted April 5, 2020 Author Share Posted April 5, 2020 I have spoken with the seller and it is in stock but it will take time to get here especially with the current situation going on. Im not in a huge hurry though..... Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted April 5, 2020 Share Posted April 5, 2020 For the extra 200 I’d go with a mbf. My buddy bought one like this from a guy making 3D printed feeders and it was a big mistake. Just be careful if you go with it. Link to comment Share on other sites More sharing options...
4n2t0 Posted April 5, 2020 Share Posted April 5, 2020 You usually get what you pay for. Link to comment Share on other sites More sharing options...
Ming the Merciless Posted April 5, 2020 Share Posted April 5, 2020 From the Fleabay photos, I see a black ABS tube mount that was used for the original KISS version of the Mr Bullet Feeder, so I would guess he copied some of the KISS bullet feeder. I have two of the DAA version MBF and my advice is the same as above: Spend the extra $200 and get the real MBF. It will be cheaper in the long run because you won't have wasted the price, time and frustration with the knock off when you give up and buy the MBF. Link to comment Share on other sites More sharing options...
RePete Posted April 5, 2020 Share Posted April 5, 2020 The piece of pipe doesn't look like it's doing anything. I have the original KISS Bulletfeeder and it works well for me. I did get rid of the pipe and installed an L bracket to the casefeeder upright. Link to comment Share on other sites More sharing options...
chgofirefighter Posted April 14, 2020 Share Posted April 14, 2020 Theres a guy on Facebook that does 3D printed bullet feeders, offers you lots of support and takes care of you if anything goes wrong. I've purchased a bullet feeder from the guy, not a single issue but in all honesty it's not the real thing. Save your money and get the real thing! 3D printed ones work, but IMO we don't know how long they will last or hold up to wear and tear... Lastly, don't buy from fleabay! Link to comment Share on other sites More sharing options...
Smeeg Posted April 23, 2020 Share Posted April 23, 2020 On 4/14/2020 at 5:32 PM, chgofirefighter said: Theres a guy on Facebook that does 3D printed bullet feeders, offers you lots of support and takes care of you if anything goes wrong. I've purchased a bullet feeder from the guy, not a single issue but in all honesty it's not the real thing. Save your money and get the real thing! 3D printed ones work, but IMO we don't know how long they will last or hold up to wear and tear... Lastly, don't buy from fleabay! so if you had to do it again would you buy Karl’s bullet feeder again? Link to comment Share on other sites More sharing options...
chgofirefighter Posted April 24, 2020 Share Posted April 24, 2020 On 4/22/2020 at 8:28 PM, Smeeg said: so if you had to do it again would you buy Karl’s bullet feeder again? Yes, of course~ However, for heavy duty use, longevity, etc I would purchase the DAA one instead. Nothing wrong with the 3D printed one but you never know! Link to comment Share on other sites More sharing options...
Bmans45 Posted April 26, 2020 Share Posted April 26, 2020 (edited) I have one of the 3D printed ones and about 10000 rounds in and it works just fine. not sure why it’s sideways but there it is . Lol Edited April 26, 2020 by Bmans45 Link to comment Share on other sites More sharing options...
4n2t0 Posted April 28, 2020 Share Posted April 28, 2020 Link to comment Share on other sites More sharing options...
greatlakes08 Posted April 28, 2020 Author Share Posted April 28, 2020 46 minutes ago, 4n2t0 said: On 4/26/2020 at 4:23 PM, Bmans45 said: I have one of the 3D printed ones and about 10000 rounds in and it works just fine. not sure why it’s sideways but there it is . Lol Can you supply a link to where you purchased. these from? do you have any issues with coated bullets? Link to comment Share on other sites More sharing options...
CZGeoege Posted April 29, 2020 Share Posted April 29, 2020 20 hours ago, greatlakes08 said: Can you supply a link to where you purchased. these from? do you have any issues with coated bullets? Carl sells a revised version of his bullet feeder now, DAA threatened to sue him over patent infringement. So he has a two hole design bullet feeder. I think it’s still $180, you have to join the FB bullet feeder knock off club to get one though. I bought a DAA unit , I’m happy with it , yes it was pricey for what it is but imo it’s built stronger than a printed unit. Link to comment Share on other sites More sharing options...
stick Posted April 29, 2020 Share Posted April 29, 2020 $149 and $55 for shipping for a item that may or may not work... and it doesn't come with the dropper die. That's another $49. No thank you! I'll stick with my real DAA MBF. Link to comment Share on other sites More sharing options...
oldmanwithagun Posted February 27 Share Posted February 27 This is an old thread but.. I do have his combo set and it works very well. The only issues I don't care for is capacity. To many bullets or cases and the clutch slips. I just ordered the 223 conversion. Takes a week or so to get. Link to comment Share on other sites More sharing options...
Bonesurf Posted March 24 Share Posted March 24 On 2/27/2024 at 12:21 PM, oldmanwithagun said: This is an old thread but.. I do have his combo set and it works very well. The only issues I don't care for is capacity. To many bullets or cases and the clutch slips. I just ordered the 223 conversion. Takes a week or so to get. I see you have it attached to an APP. The case feeder. How did you do that? Link to comment Share on other sites More sharing options...
oldmanwithagun Posted April 6 Share Posted April 6 I bought a 25 foot length os 1/2 inch brake line protector (like a coiledspring) use some plastic tubeing for ends. Whole setup is changed, bought a mark 7 case feeder that now supplys roll sizer, acp and app and Lyman 8 turret. they all mount on a inline fabrication. I will take soome images and post. Link to comment Share on other sites More sharing options...
Bonesurf Posted April 8 Share Posted April 8 On 4/6/2024 at 1:24 PM, oldmanwithagun said: I bought a 25 foot length os 1/2 inch brake line protector (like a coiledspring) use some plastic tubeing for ends. Whole setup is changed, bought a mark 7 case feeder that now supplys roll sizer, acp and app and Lyman 8 turret. they all mount on a inline fabrication. I will take soome images and post. like this stuff? https://www.amazon.com/Electriduct-Steel-Spring-Flexible-Protector/dp/B08BJB88CC/ref=sr_1_9?crid=8E2ARXJ7RGAR&dib=eyJ2IjoiMSJ9.DY7nQDxsqBloxQPc6bmE2hfa3KfirDU_-i0N9pa-UxoeVjAv_eDM7txHiCfY_W92bvLATWk28T33Wz19HdW1O5UayO1amSXPcur4yMaPdXf8he8EaRLZj1GclTPr8OwUUocMQpGiqaZzblhvYvFDLDglvgEp2KjJSkB4bHpPMK5NABpjQTgTwu_JpduphllEYI1o0DOavmG1b0Mdz0NbomThNGWGH56Ely6XxFQcyrQ.sbgAEa6wjZ2glUs5saHOU964lk0TyDuIhp40uU8KDMU&dib_tag=se&keywords=brake%2Bline%2Bguard%2B1%2F2"&qid=1712543697&sprefix=brake%2Bline%2Bguar%2B1%2F2%2B%2Caps%2C145&sr=8-9&th=1 Link to comment Share on other sites More sharing options...
oldmanwithagun Posted April 18 Share Posted April 18 On 4/7/2024 at 7:36 PM, Bonesurf said: like this stuff? https://www.amazon.com/Electriduct-Steel-Spring-Flexible-Protector/dp/B08BJB88CC/ref=sr_1_9?crid=8E2ARXJ7RGAR&dib=eyJ2IjoiMSJ9.DY7nQDxsqBloxQPc6bmE2hfa3KfirDU_-i0N9pa-UxoeVjAv_eDM7txHiCfY_W92bvLATWk28T33Wz19HdW1O5UayO1amSXPcur4yMaPdXf8he8EaRLZj1GclTPr8OwUUocMQpGiqaZzblhvYvFDLDglvgEp2KjJSkB4bHpPMK5NABpjQTgTwu_JpduphllEYI1o0DOavmG1b0Mdz0NbomThNGWGH56Ely6XxFQcyrQ.sbgAEa6wjZ2glUs5saHOU964lk0TyDuIhp40uU8KDMU&dib_tag=se&keywords=brake%2Bline%2Bguard%2B1%2F2"&qid=1712543697&sprefix=brake%2Bline%2Bguar%2B1%2F2%2B%2Caps%2C145&sr=8-9&th=1 That would work, this is what I bought. https://www.amazon.com/gp/product/B01MTV5UW4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Probably only diff is length. I keep using pieces as I now feed a roll sized, and 2 different Lee's ACP and APP. APP I got cheap from ebay. The units work but making them do different things is a bitch so I set one up as a decapper and the other as a large primer priming tool. I once changed my Dillon 650 from small to large and then back to small primers. Will NEVER do that again Link to comment Share on other sites More sharing options...
Bonesurf Posted April 18 Share Posted April 18 I got the 1/2" stuff and that was great for 9mm. but doesnt work right for 223. I think im gonna get a narrower one and slide it inside the 1/2" and see if that'll feed 223 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now