Aircooled6racer Posted February 19, 2019 Share Posted February 19, 2019 (edited) Hello: It is not so much that the frame wears out it is the rails coming loose in the frame. If you are thinking of shooting open you may want to consider Carry Optics also. Since Carry Optics now has the 140mm rule it is alot more fun. Only down side is shooting minor but that just makes you a better shooter since you have to hit more Alphas. At least I try to. Thanks, Eric Edited February 19, 2019 by Aircooled6racer Link to comment Share on other sites More sharing options...
Hiroshi Posted February 20, 2019 Share Posted February 20, 2019 This is not a Glock Open but I thought I would share a m&p open gun. Link to comment Share on other sites More sharing options...
blueorison Posted February 20, 2019 Share Posted February 20, 2019 Watch out for pins walking; SJC mods with screws where the pins should be, might be of help. Link to comment Share on other sites More sharing options...
yigal Posted February 20, 2019 Share Posted February 20, 2019 (edited) if u love somebody u have to ignore his negative disadvantages. but don't hate it . if u don't like glock don't marry him. i think that better name for this post is: disadvantages of open glock. Edited February 20, 2019 by yigal Link to comment Share on other sites More sharing options...
Fo0 Posted April 19, 2019 Share Posted April 19, 2019 Does anyone have problems running major PF in Glock aftermarket barrels? SJC states drop-in fit barrels for major 9mm loads do not have the proper chamber, throating, and threads for an open gun. they say drop-in barrels don't have true fully supported chambers. KKM website says they have "fully supported SAAMI spec match chambers" is SJC info correct or out of date Link to comment Share on other sites More sharing options...
Lastcat Posted April 19, 2019 Share Posted April 19, 2019 22 minutes ago, Fo0 said: Does anyone have problems running major PF in Glock aftermarket barrels? SJC states drop-in fit barrels for major 9mm loads do not have the proper chamber, throating, and threads for an open gun. they say drop-in barrels don't have true fully supported chambers. KKM website says they have "fully supported SAAMI spec match chambers" is SJC info correct or out of date Not sure about SJC. I run a G17 Open Major and use the KKM Barrels. Very accurate and good support. No Glock smile. Using a Carver mount, Carver Comp, power factor at 170. Everglades 124 jhp, power pistol and misc brass. I wish I could afford a Chaos but already had a G17 and was cheaper to get into the Sport, until I figure my upgrade. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now