jkrispies Posted January 19, 2019 Share Posted January 19, 2019 (edited) Hi all! Before I start this thread, I need to preface it by saying that I personally have zero experience with 3D printing, but I have access to printers through friends who are willing to work with me. In other words, please phrase your answers for a total newbie... I'd like to install a magwell on my PCC, but I haven't found any designs which fit my vision of a perfect magwell. If I could find an open-sourced or purchasable program to print for an NFA lower, I think I could take it to my buddies and modify it with them from there. This is especially true since my idea is more on the minimalist side and will likely involve subtracting from the design more than adding to it. Really, if I can find one with an acceptable attachment point, we could probably handle the funnel modifications if the program will allow us to modify the design. Worst case scenario, I might be able to just go old school and sand it down after the fact. So... does anybody know where I can locate an existing 3D print plan (design, program... whatever it's called in 3D printing???) for an NFA lower magwell? Thanks, J Edited January 19, 2019 by jkrispies Link to comment
Aircooled6racer Posted January 19, 2019 Share Posted January 19, 2019 Hello: I will ask my son if he knows of any. That kid makes some pretty cool things with his 3D printer. Thanks, Eric Link to comment
jkrispies Posted January 19, 2019 Author Share Posted January 19, 2019 2 hours ago, Aircooled6racer said: Hello: I will ask my son if he knows of any. That kid makes some pretty cool things with his 3D printer. Thanks, Eric Cool, thanks! Link to comment
ABQautoxer Posted January 19, 2019 Share Posted January 19, 2019 Check places like thingverse: https://www.thingiverse.com/thing:2509328 No experience but I was looking since I have several friends into 3D printing if I one ones I like for the FM9 and GMR15. Link to comment
Aircooled6racer Posted January 19, 2019 Share Posted January 19, 2019 Hello: That is the site he has posted some of his stuff on. When he wakes up I will ask him to look. Thanks, Eric Link to comment
jkrispies Posted January 19, 2019 Author Share Posted January 19, 2019 16 minutes ago, ABQautoxer said: Check places like thingverse: https://www.thingiverse.com/thing:2509328 No experience but I was looking since I have several friends into 3D printing if I one ones I like for the FM9 and GMR15. 13 minutes ago, Aircooled6racer said: Hello: That is the site he has posted some of his stuff on. When he wakes up I will ask him to look. Thanks, Eric Thanks for the link! I didn't see any PCC magwells, but maybe somebody else with a better search-fu can find one. Link to comment
VincePalazzolo Posted January 19, 2019 Share Posted January 19, 2019 I am looking for a magwell that will work on my M&P 22. Let me know if you know someone that has one available that will fit. Vince Link to comment
outdoorjake Posted January 19, 2019 Share Posted January 19, 2019 2 hours ago, VincePalazzolo said: I am looking for a magwell that will work on my M&P 22. Let me know if you know someone that has one available that will fit. Vince TitanRocket.com sells one for the M&P 22 and you can get it in custom colors and text on it if you want Link to comment
jkrispies Posted January 19, 2019 Author Share Posted January 19, 2019 11 minutes ago, outdoorjake said: TitanRocket.com sells one for the M&P 22 and you can get it in custom colors and text on it if you want One of these may be in my future for my PCC. The price is right, and I can grind on it. Link to comment
andrewt556 Posted January 20, 2019 Share Posted January 20, 2019 probably will have to design something from the ground up major PITA, but kinda fun depending on the way you see it. Made one for my palmetto lower took 4 tries to get it right. Link to comment
andrewt556 Posted January 20, 2019 Share Posted January 20, 2019 FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option. Link to comment
jkrispies Posted January 20, 2019 Author Share Posted January 20, 2019 16 minutes ago, andrewt556 said: FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option. Ah. Good info Link to comment
Scooter Posted January 20, 2019 Share Posted January 20, 2019 2 hours ago, andrewt556 said: FYI 3d printed stuff isnt like a solid piece of aluminum. Internally imagine it has a honey combish structure so sanding may not be the best option. Not necessarily true. You can print things solid, just takes more time and money. Link to comment
Startingover Posted January 20, 2019 Share Posted January 20, 2019 16 hours ago, VincePalazzolo said: I am looking for a magwell that will work on my M&P 22. Let me know if you know someone that has one available that will fit. Vince I have a Titan Rocket on my 15-22, good bang for the buck Link to comment
jmnjoeyd1 Posted January 20, 2019 Share Posted January 20, 2019 I have a 3d printer. I also have a cnc mill. I have been working on a pcc magwell off and on for a while and have yet to come up with a version I'm happy with. The downside is there are multiple pcc lowers out there so a different design for each is required. I have printed some magwells for 223/5.56 forged Ar lowers that are durable and look good too. Me and my friends have been using them on our 3gun Ar's for a couple years. Link to comment
Startingover Posted January 21, 2019 Share Posted January 21, 2019 I coworker has been working on one for my Jones Arms Kronos. We are on version 5 or 6 now. Link to comment
RAVAGE88 Posted January 21, 2019 Share Posted January 21, 2019 You might try GrabCad.... MB Link to comment
cecil Posted January 21, 2019 Share Posted January 21, 2019 I sure Wish Titan Rocket would make a magwell for a Stag 9mm carbine … Link to comment
Startingover Posted January 21, 2019 Share Posted January 21, 2019 (edited) I sure wish the guys from Titan Rocket would make some other versions also Edited January 21, 2019 by Startingover Link to comment
outdoorjake Posted January 21, 2019 Share Posted January 21, 2019 (edited) we would be happy to help anyone interested in helping with making a magwell for what ever lower they have if at possible with our designs Edited January 21, 2019 by outdoorjake retraction of statment Link to comment
jkrispies Posted January 21, 2019 Author Share Posted January 21, 2019 37 minutes ago, outdoorjake said: we would be happy to help anyone interested in helping with making a magwell for what ever lower they have if at possible with our designs Jake, I sent Brandon a return email earlier this morning. I'll PM you with the gist of my email. Link to comment
jkrispies Posted January 21, 2019 Author Share Posted January 21, 2019 (edited) FWIW, here’s my real inspiration for this thread... That chunk of meat looking thing? That’s me. Off my wrist. Part of the pleasure of living the life of a lefty in a right handed world. Edited January 21, 2019 by jkrispies Link to comment
nasty618 Posted January 30, 2019 Share Posted January 30, 2019 Hi all. I have been looking for a magwell for my Glock 9MM NFA lower and besides the TechWell offering that fits NFA, CK Arms and a couple of other lowers - i cant seem to find anything. Trying to find an inexpensive solution and 3D printing seems to be the way to go. I cant find any 3D designs online for my specific lower... but looks like they do exist: http://www.makereadyproshop.com/taccom-magwell-pcc-magazine-funnel/ Does any one have a file they could share with me? Or a lead on where to find it? Thank you in advance! Link to comment
45plinkster Posted January 30, 2019 Share Posted January 30, 2019 (edited) Your best is to make friends with someone that that proficient with a a few Program and modeling. Jo N thingiverse grabcad and make some friends. Edited January 30, 2019 by 45plinkster Link to comment
MatroskinT Posted December 21, 2022 Share Posted December 21, 2022 Reviving the thread. Did anyone find the magwell stl for PCC to print? Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now