MatroskinT

Thanks for the suggestion, looks like Hydra P+ should work with both guns. And with positive locking it should work for 3 Gun. BTW DAA Max also seem to work for both. I’m using Weber tactical now and I’m not a fan of it.

thank you all folks -you nailed it @beastmode_05

I assume it would be less of the problem for LO. But if I compare it to CZ would it be noticeable with light springs kit?

@HesedTechThank you for the detailed comparison, looks like apart from the gun parts that will need to be modified anyway the holster is the only expense. I'm fine with rest. Now I need to decide would that be Limited Pro or the Stock Master

I feel like sometimes we just _want_ next shiny toy regardless of pragmatic arguments. If the grip and grip angle are close enough to the point it doesn't require re-train the draw - please confirm this point, I feel confident enough that it will work in any situation. I'm not planning to participate in any Level 3 matches anytime soon, just local USPSA, Knopckdown and 3-Gun competitions. The real concern I have are the early reports on tanfoglio's reliability and parts availability - reliability problems I assume were fixed by now, and with IFG stepping in I see parts are somewhat available.

Thank you for the feedback!!!

Elaborate?

cross posted from Beginners Decided to get a backup to my Shadow 2 Carry Optic that would be the same but a bit different. What you guys think of Tanfoglio limited Pro or Stock Master in small fame ( for cz mags compatibility) ? Was thinking that I could put magwell and also run it 3gun / Limited Optics. For the background the only mods I had on S2 are reach reduction kit, lighter springs and lock grips. And yes another S2 is an option but I like chrome finish on Tanfos.

Decided to get a backup to my Shadow 2 Carry Optic that would be the same but a bit different. What you guys think of Tanfoglio limited Pro or Stock Master in small frame ( for cz mags compatibility) ? Was thinking that I could put magwell and also run it 3gun / Limited Optics. For the background the only mods I had on S2 are reach reduction kit, lighter springs and lock grips. And yes another S2 is an option but I like chrome finish on Tanfos.

Check out if the ejector is not bent . You can feel it if it touches/catches the bolt

Reviving the thread. Did anyone find the magwell stl for PCC to print?

Update: after approximately 600/700 rounds tried to run B&P shells again (right after knockdown match) and to my surprise it cycled 7 rounds one by one without problems. Will have to try it on the next match.

I use it in USPSA, the weak point is the ejector that you can bend eventually if you slam the magazine in. Get the taccom parts to make ergos better. The barrel is getting hot so certainly you can get the "ULW Handguard for Ruger PC Carbine". also helps with the grip. BTW it eats everything I feed it.

Just a heads-up: tried BASCHIERI & PELLAGRI 12 GAUGE COMPETITION ONE 1OZ 2-3/4'' 1160 FPS #7.5 ammo this weekend - it is softest ammo I ever used BUT it wont cycle my 1301 comp pro. Went back to Fiocchi Shooting Dynamics Target Load, 12 Gauge, 2.75", 1 1/8 oz, #8 which worked for 250 rounds so far

Any progress? Can you share some pictures?