Magictalent Posted January 19, 2019 Share Posted January 19, 2019 I know there is new TSO version came out this year with the new mag release. Now I find Seboweapons has them available. https://seboweapons.com/en/grips/443-tactical-sportsczechmate-magazine-catch-set.html Link to comment Share on other sites More sharing options...
George16 Posted January 19, 2019 Share Posted January 19, 2019 That’s nice! For about $44 plus shipping, it’s not bad at all considering the work I had to do to retrofit my TSO with the shadow 2 mag release pad. Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted January 20, 2019 Share Posted January 20, 2019 That’s nice! For about $44 plus shipping, it’s not bad at all considering the work I had to do to retrofit my TSO with the shadow 2 mag release pad.Did you put your catch in a vise to drill it? This is my current project at the moment. I have access to a drill press and want to use that to drill and then turn the tap in the press chuck by hand, to start it straight. I bought a Dormer M3 tap at Amazon, but received an empty little red plastic case in a huge 15 x 15" envelope. Kinda funny, but disappointing. Link to comment Share on other sites More sharing options...
George16 Posted January 20, 2019 Share Posted January 20, 2019 7 hours ago, robert.a.brewer. said: Did you put your catch in a vise to drill it? This is my current project at the moment. I have access to a drill press and want to use that to drill and then turn the tap in the press chuck by hand, to start it straight. I bought a Dormer M3 tap at Amazon, but received an empty little red plastic case in a huge 15 x 15" envelope. Kinda funny, but disappointing. Yes. My drill press has a vise and I also used a 2.5mm carbide drill bit since I have some on hand to make the job a lot easier. For tapping, I also the for the press initially. Sorry to hear about your Amazon experience. I have a bunch of metric tap and dies since I needed them when building my RC race trucks. Link to comment Share on other sites More sharing options...
muncie21 Posted January 20, 2019 Share Posted January 20, 2019 This is good to hear. Hopefully they show up in the US before 2020 Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted January 20, 2019 Share Posted January 20, 2019 Yes. My drill press has a vise....Nice! Link to comment Share on other sites More sharing options...
RCFL Posted February 13, 2019 Share Posted February 13, 2019 Back in stock at Sebo. Link to comment Share on other sites More sharing options...
abb1 Posted February 13, 2019 Share Posted February 13, 2019 Hmmm, I have no issue with the stock mag release on the CM. I would be worried that it would be to easy to accidentally engage when not wanted. I would be interested on hearing from those that have this put in. Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted February 13, 2019 Share Posted February 13, 2019 Hmmm, I have no issue with the stock mag release on the CM. I would be worried that it would be to easy to accidentally engage when not wanted. I would be interested on hearing from those that have this put in.It took me awhile to get used to the mag release; I have no problem with it now. Many like the S2 paddle. I want to try it. haven't modified mine yet. Link to comment Share on other sites More sharing options...
Magictalent Posted February 13, 2019 Author Share Posted February 13, 2019 19 hours ago, abb1 said: Hmmm, I have no issue with the stock mag release on the CM. I would be worried that it would be to easy to accidentally engage when not wanted. I would be interested on hearing from those that have this put in. I orderd, but not ship or received yet. It will work well I think. The current mag release is too high for me and I will also need to adjust the spring pressure. Link to comment Share on other sites More sharing options...
Fo0 Posted February 13, 2019 Share Posted February 13, 2019 does any place sell the sp01 shadow orange mag release with button Link to comment Share on other sites More sharing options...
George16 Posted February 14, 2019 Share Posted February 14, 2019 I don’t have any issues with mine. I grinded about 2-3 mm off of the stock TSO mag release before tapping and drilling it for the installation of the shadow 2 pad. By grinding off 2-3mm, the height of the mag release with the shadow 2 pad installed is the same as the stock TSO mag release height. stock mag release grounded down, drilled, tapped and roll pin installed. You’ll notice the checkering is gone on the TSO release. Shadow 2 pad installed Link to comment Share on other sites More sharing options...
mveto Posted February 14, 2019 Share Posted February 14, 2019 I’m hoping these will be available state side soon, I have no desire to grind down tap the factory part. Link to comment Share on other sites More sharing options...
RCFL Posted February 14, 2019 Share Posted February 14, 2019 I was just about to order an extra release to have it shortened, drilled and tapped for the S2 paddle, which I love on the S2. Decided to check one last time at Sebo Weapons and they were back in stock, so I ordered one. We’ll see how long it takes to arrive, but it’s still better than waiting for them to show up state-side. Link to comment Share on other sites More sharing options...
selecw Posted March 4, 2019 Share Posted March 4, 2019 I just ordered one from Sebo. Link to comment Share on other sites More sharing options...
clw42 Posted March 4, 2019 Share Posted March 4, 2019 Looks like they're up to $53 plus shipping and he only has blue and pink available. Link to comment Share on other sites More sharing options...
abb1 Posted March 4, 2019 Share Posted March 4, 2019 (edited) 3 hours ago, clw42 said: Looks like they're up to $53 plus shipping and he only has blue and pink available. You can get the blue or pink, and buy a different colour Paddle which they sell individually at Lok Grips for the shadow 2 which will fit. https://lokgrips.com/gun-grips/cz/cz-shadow-2/accessories/mag-release-button/ Edited March 4, 2019 by abb1 Link to comment Share on other sites More sharing options...
clw42 Posted March 4, 2019 Share Posted March 4, 2019 Just now, abb1 said: You can get the blue or pink, and buy a different colour Paddle which they sell individually at Lok Grips for the shadow 2 which will fit. Ah, thanks!! Link to comment Share on other sites More sharing options...
selecw Posted March 4, 2019 Share Posted March 4, 2019 Sebo emailed me after I ordered. Inventory audit till March 10 will delay shipping. I ordered blue but asked if they will have red in stock by then .. Link to comment Share on other sites More sharing options...
Fo0 Posted March 4, 2019 Share Posted March 4, 2019 Are SeboWeapons Genuine CZ parts or his own made? Link to comment Share on other sites More sharing options...
abb1 Posted March 4, 2019 Share Posted March 4, 2019 (edited) 18 minutes ago, Fo0 said: Are SeboWeapons Genuine CZ parts or his own made? A lot are CZ, but he also has aftermarket parts as well, such as LOK grips. If you email him about a particular product and if it is CZ or after market, he will answer you. He is pretty good. Edited March 4, 2019 by abb1 Link to comment Share on other sites More sharing options...
clw42 Posted April 5, 2019 Share Posted April 5, 2019 Just ordered one from Sebo. He has a lot more color options available now. Link to comment Share on other sites More sharing options...
RCFL Posted April 5, 2019 Share Posted April 5, 2019 Mine took about ten days to arrive to Florida. Didn’t install it right away because I then learned I should probably have a spare screw for the mag catch spring on hand in case the one staked in the gun doesn’t come out nicely. Ordered a screw along with some other things I needed from CZ-USA. Original screw came out intact, new release is in and I’m much happier with it over the factory release. The paddle that Sebo ships does seem to be the Lok paddle as opposed to the colored S2 paddles that CZ makes. I was a little bummed by this as I already have several of the CZ colored parts on the gun, it I suppose if it bothers me that much I can just get a colored S2 aluminum paddle and my OCD will be satisfied. Link to comment Share on other sites More sharing options...
hurley326 Posted April 19, 2019 Share Posted April 19, 2019 I did the same thing as George did with sanding and then drilling and tapping the release. It was a fun project but it was my first time tapping something and i broke the tap off just seconds before i was finished. I had to toss the entire thing and buy a new release and start from scratch but came it out perfect. USE TAP FLUID! Dont make the same mistake i did lol. Link to comment Share on other sites More sharing options...
robert.a.brewer. Posted April 20, 2019 Share Posted April 20, 2019 I did the same thing as George did with sanding and then drilling and tapping the release. It was a fun project but it was my first time tapping something and i broke the tap off just seconds before i was finished. I had to toss the entire thing and buy a new release and start from scratch but came it out perfect. USE TAP FLUID! Dont make the same mistake i did lol. hurley, Is that the concealed hammer? Was it a drop in? If not,was it easy to fit? Any trouble with the safety working properly?I was thinking of getting one, but worried about fitment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now