Jump to content
Brian Enos's Forums... Maku mozo!

Magictalent

Classifieds
  • Posts

    223
  • Joined

  • Last visited

Everything posted by Magictalent

  1. My 9 mm mags are from dawson. Other mag works too. My 40 SW are from Tripp. I like mag with thicker steel. They last a little longer. Mags are comsumerbles. Depends on how often you dryfire and pratice, 2 to 3 sets of mag are good to have.
  2. Well, with covid and other life changing events, I have not get where I wanted to be within the time limted I set. That does not mean I am going to stop there. Currently training on below. 1. move/drive the gun with suport hand. 2. "see" 2 targets. 3. eyes on target or looking searching for target all time. 4. gun on line between target and eye most of time. 5. physical training to build body and reduce recation time
  3. When I shoot very slow, I have no problem switch gun and divisions. Everything will work. Then later I pushed to 1second draw, 1.2 reload, 0.23 split and transition. Still very slow, but everything is by feel now. A very small change in location of the belt will cause feel changes. Switch gun? No way. Even just a taller or skinnier front post will cause the feel change and body react slower.
  4. Before I were able to call my shots, I only think I have bad grip. Now I can call my shot better, what happen is I over swing, one C then pull the gun back, another C on the other side. Fast eyes moving with legs are all great skills to have. Take very long time to train. I have spend 1 year already, can't perform it 100%
  5. not an app, but works really well on my TV. You can change how many rounds per target as you wish. Reload or not. Move Left to Right or Right to left. Use a little bit of imagination, almost unlimited practices.
  6. It will not fit the box. First the original magwell is not legal in IPSC. Need to change. Second, the mag will stick out 2 mm. Max has a higher front sight.
  7. Car engine oil I have. Works great.
  8. Congratulations on the new gun. I have a max in 40. I use both 10 mm 10 rounds and 40 9 rounds. Both work well. 10 mm no good for IPSC with MAX due to it has a tall front sight.
  9. Congratulations on the new gun. I have a max in 40. I use both 10 mm 10 rounds and 40 9 rounds. Both work well. 10 mm no good for IPSC with MAX due to it has a tall front sight.
  10. Hi I just installed the CZ comp hammer and short reset dis-connector. Trigger do not feel right. Feel like the after the sear release the hammer, trigger bar still catch on the disconnector. Any one have this experience? How to fix? Thank you very much in advance.
  11. I am going to start Classic division in year 2020. It is the only division which have 10 round mag capacity in higher level matches. I am from Canada. 10 round max.......... For this reason, classic is going to be my focus for new few years.
  12. I just ordered a 18.5' version of FX9 I like to know what load is good for the gun. I have heard that SGM mags are working great with the gun. What is your experience? What trigger work well with this gun? What stock and buffer setup is good for this gun? I have heard that Odin works stock and buffer are great. But I have not been able to come up with the money yet. Grip is also a challenge.
  13. I put in 14lb spring and below is the load data comes back. All drive the recoil spring with no issue.
  14. IPSC load. 124 Campro RN 6.3 WAC OAL 1.145 the is is the longest my big stick will take. USPSA load 121 Campro RN 8.65 3N38 OAL 1.145
  15. Magictalent

    Sights

    I run .090 w and .240h. Not going back to factory. Dawson is my only choice now. A .090 really help, but I do need to make sure my grip is right. Jim
  16. Shooter's connect do not ship outside of US. Most of the world can't get stuff from them.
  17. I have always have issue with the current Czechmate slide racker. When it install on the right sight, I can't move my hand fast to establish a grip. When install on the left sight, my thumb will hit it accidentally. I see this on Seboweapons.com and make the order. I think it is going help me. https://seboweapons.com/en/mount-rest/445-higher-slide-racker.html
  18. I orderd, but not ship or received yet. It will work well I think. The current mag release is too high for me and I will also need to adjust the spring pressure.
  19. Hi ZZT Another question. I have measured the pre and over travel last night. Pre-travel at 0.045 overtravel at 0.045 Is this good numbers? I am more of a CZ guy so anything within 0.100 is good to me. But I do want to know what is good as generally accepted by 1911/2011 shooter. Thank you very much again
  20. Thank you very much. I went and check the parts number. It looks like same mag release spring used for all CZ 75 guns. But each gun I have feel different weight to press it down. I will need to adjust it then.
  21. Hi. This is Jim from Canada. I shoot CZ Shadow, TSO, and Czechmate. I love the feel of Shadow 2 mag release. It is light weigh and easy to touch off. My TSO and Czechmate on the other hand no. May I ask how to reduce mag release spring power for TSO and Czechmate? Thank you very much for your help. Jim
  22. Yes, the half cock notch and all other safety works. Thank you very much for your help. I am going to let it like this and shoot for a thousand round first then to see if I am going to do more work with it. Jim
  23. Thank you very much again. I have check the overtravel adjustments. They seem okay. Current trigger pull weight at 2.7 lbs. (Set to same like my Shadow 2 SA pull weight).Very minimum take up and "nice break". (To me nice break mean I do not feel the break, no "wall", just pull though, only realize the hammer drop.) I have polished all the series 80 parts and trigger. I have not touch disconnector, sear, and hammer yet. I can feel the sharp edges from those parts, but I were not sure I should smooth them out a bit or not. (Parts are so nice and no marks at all) With my other cheap 1911 use MIM part, I do not keep any sharp edges except sear. hammer engagement. That give me a not so "positive" reset. I let other try the reset and they said not bad. They like the "positive" reset. That "positive" reset is not what I like. I do not want to feel that reset at all if possible. It feels like something jump/pop upward. I am thinking I may need to work on the where sear and disconnector contact like below picture. But I am not sure how they should contact to provide a "nice feel" (to me mean no feeling when they disconnect. Can you help me understand their relationship? Thank you again.
×
×
  • Create New...