Friction Posted January 17, 2019 Share Posted January 17, 2019 Anyone have any experience using Mean Arms 5.56 to 9mm mag conversion kits? I’m not looking at them for competition use, but I like the idea ditching an adapter block to more easily share SBR lowers. I’m just curious if they actually work reliably. TIAhttps://www.meanarms.com/products/detail/endomag-9mm Link to comment
Mac-pcc Posted January 17, 2019 Share Posted January 17, 2019 (edited) I haven't but they look pretty cool. Too bad they don't make one for the 40 round pmags. Edited January 17, 2019 by Mac-pcc Link to comment
MoRivera Posted January 17, 2019 Share Posted January 17, 2019 (edited) Couple threads here on it... Edited January 17, 2019 by MoRivera Link to comment
George16 Posted January 17, 2019 Share Posted January 17, 2019 17 hours ago, Friction said: Anyone have any experience using Mean Arms 5.56 to 9mm mag conversion kits? I’m not looking at them for competition use, but I like the idea ditching an adapter block to more easily share SBR lowers. I’m just curious if they actually work reliably. TIAhttps://www.meanarms.com/products/detail/endomag-9mm I got a three brand new ones that I didn’t end up using because I bought an MPX. It was pre-ordered, opened it but didn’t use it at all. I actually forgot all about it until I came across your post. Let me know if your interested. Link to comment
Friction Posted January 17, 2019 Author Share Posted January 17, 2019 (edited) Some good points addressed in the link to the other threads posted by MoRivera. The key one that stood out for me is the process for clearing it on anything but an empty mag. Since the ejector is part of the magazine, if you dump the mag before you pull the round out of the chamber you wind up having to manually remove the round from the bolt face. The only way to ULSC with a partially loaded mag is to lock the bolt back and then drop the mag. That's pretty much the opposite of any habitual technique. I could see that being a problem for people. Edited January 17, 2019 by Friction sp Link to comment
Scooter Posted January 18, 2019 Share Posted January 18, 2019 The ejector is too flexible. When it moves on you, it'll prevent the bolt from moving forward. The mag is almost impossible to seat with the bolt forward. Link to comment
Patrick Scott Posted January 19, 2019 Share Posted January 19, 2019 (edited) I bought one to check out. One look at the flexible plastic "ejector" and I was like "nope". One missed reload, one drop at the right angle and that thing is done for. Edited January 19, 2019 by Patrick Scott Link to comment
HoMiE Posted January 19, 2019 Share Posted January 19, 2019 As many have said ejector is too flimsy, seems like only reliable option may be on a cmmg banshee upper but haven’t seen any further reports on mag inserts. Link to comment
ss+P Posted November 9, 2019 Share Posted November 9, 2019 I have been using these for 9months now. I have had a few feeding problems. After great customer service I changed barrels and fixed the issue. The MEANArms guys really sound like they know what they are talking about. I haven’t broken any part on the insert. I am using a Palmetto state complete upper. I put over 1k through it with out cleaning and it still ran flawlessly. they said to pay attention to a Shot Show 2020 for some really cool new products. Link to comment
Joedirt199 Posted November 10, 2019 Share Posted November 10, 2019 (edited) Got 3 of them from cmmg. Only had one lock bolt back with 1 round left in the mag, once. Loaded with flat points, hollow points, round nose, heavy and light bullets mixed in a mag and ate them all up. Edited November 10, 2019 by Joedirt199 Link to comment
Norther Posted November 11, 2019 Share Posted November 11, 2019 I’m happy with mine! Running them on a CMMG Guard upper so I removed the ejector. I think it’s the only way to go for an SBR that you’re swapping calibers on often. Link to comment
Eric802 Posted November 11, 2019 Share Posted November 11, 2019 (edited) I only have a couple hundred rounds through mine (Foxtrot Mike upper, SBR'd lower) but they've been pretty reliable. As to the issue with being hard to seat with the bolt closed, I've heard that if you trim more off that tab in the back (the one you cut to set mag capacity when you first install the Endomag into the mag shell), that helps with that issue. Haven't tried it myself, though. Edited November 11, 2019 by Eric802 clarification Link to comment
ss+P Posted November 14, 2019 Share Posted November 14, 2019 Joe dirt199 email them if you are still having problems. They are really knowledgeable and will do just about anything to help you out. they also have a lifetime guarantee. A buddy of mine messed up the ejector on one of his(not sure how) and they replaced it. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now