poortrader Posted August 19, 2019 Share Posted August 19, 2019 I received my replacement part today. It was post marked as J Kenny had said so it was probably lost by the USPS. Link to comment Share on other sites More sharing options...
cas Posted September 2, 2019 Share Posted September 2, 2019 On 8/16/2019 at 7:49 PM, cas said: By golly I MIGHT have solved it. Nope. What I fixed was an issue, gun's working a lot smoother now. But sadly it wasn't the problem. Link to comment Share on other sites More sharing options...
Halo09 Posted September 2, 2019 Share Posted September 2, 2019 22 minutes ago, cas said: Nope. What I fixed was an issue, gun's working a lot smoother now. But sadly it wasn't the problem. Eek! I’d had about 150 rounds through mine, then it started randomly putting 2 on the lifter, thereby jamming it up. Back to my TTI lifter until they figure things out a bit more. (Yes, I have a strong dog ear spring, newer mag tube spring, and a smooth shell latch). Link to comment Share on other sites More sharing options...
cas Posted September 2, 2019 Share Posted September 2, 2019 I ran 100+ rounds through it yesterday, averaged one malfunction every other tube full. Nose high, nose low, lifter hang ups... not happy. Link to comment Share on other sites More sharing options...
Eagle4 Posted September 3, 2019 Share Posted September 3, 2019 (edited) Very painfull to install after bending but prevent some loading issues. Edited September 3, 2019 by Eagle4 Link to comment Share on other sites More sharing options...
cas Posted September 11, 2019 Share Posted September 11, 2019 I guess I need to try that? Because the silence from the manufacturer is rather loud. Link to comment Share on other sites More sharing options...
Eagle4 Posted September 13, 2019 Share Posted September 13, 2019 I think the bending solution can proove the spring is too weak and need a bigger coil to work properly. Link to comment Share on other sites More sharing options...
Aforum55 Posted September 22, 2019 Share Posted September 22, 2019 On 12/8/2018 at 9:45 AM, Steve RA said: Pardon my ignorance, but, what does this lifter modification do compared to the stock one? I've got a M3000 that was pretty well tricked out by MOA a few years ago so it presently has whatever they did back then. Allows you to load the SG when bolt is locked to rear. Once you start feeding the tube, it'll automatically load one in the chamber for you. Biggest draw is it prevents Port loading. An alternative option to the Browning A5. Link to comment Share on other sites More sharing options...
cas Posted September 22, 2019 Share Posted September 22, 2019 It saves tons of time port loaded, 1, maybe 2 seconds. Of course wasting wasting many many times that, having to clear multiple malfunctions per stage..... Link to comment Share on other sites More sharing options...
ABarrow Posted October 11, 2019 Author Share Posted October 11, 2019 Any updates from anyone who has had one for a little while now? Link to comment Share on other sites More sharing options...
Snausages32 Posted October 16, 2019 Share Posted October 16, 2019 I have the MOA one on my Stoeger M3K, and used it all season. LOVE IT. Took a little time to break it in, and since then it's been perfect. Link to comment Share on other sites More sharing options...
cas Posted October 28, 2019 Share Posted October 28, 2019 On 10/11/2019 at 2:24 PM, ABarrow said: Any updates from anyone who has had one for a little while now? lol, that's why I keep checking back in, hoping for some revelation. I'm sure I'll get an answer to me emails any week now. Link to comment Share on other sites More sharing options...
Halo09 Posted October 28, 2019 Share Posted October 28, 2019 I took mine out after it would randomly let an additional shell out on my lifter. Went back to my TTI extended lifter and haven’t had an issue Link to comment Share on other sites More sharing options...
Eagle4 Posted October 29, 2019 Share Posted October 29, 2019 Who have tried to bend the spring ? Link to comment Share on other sites More sharing options...
021411 Posted November 6, 2019 Share Posted November 6, 2019 Uh oh. Last round every time. Weak mag tube spring probably. Link to comment Share on other sites More sharing options...
Dan Sierpina Posted November 7, 2019 Share Posted November 7, 2019 3 hours ago, 021411 said: Uh oh. Last round every time. Weak mag tube spring probably. J. Kenney lifter? Link to comment Share on other sites More sharing options...
021411 Posted November 7, 2019 Share Posted November 7, 2019 44 minutes ago, Dan Sierpina said: J. Kenney lifter? Yeah Link to comment Share on other sites More sharing options...
021411 Posted November 7, 2019 Share Posted November 7, 2019 For those having issues with the J Kenny lifters, I discovered that Hayes Custom Guns actually sells them here state side. Maybe they can help out. PS- I have no affiliation with them. Link to comment Share on other sites More sharing options...
Snausages32 Posted November 7, 2019 Share Posted November 7, 2019 (edited) 15 hours ago, 021411 said: Uh oh. Last round every time. Weak mag tube spring probably. No experience with the J Kenny one, but my MOA one, the manufacturer said that I needed an extra strong (longer) spring for it to work properly. Try a new spring first, see how that works before you do anything else. Edited November 7, 2019 by Snausages32 Link to comment Share on other sites More sharing options...
Eagle4 Posted November 7, 2019 Share Posted November 7, 2019 10 hours ago, 021411 said: Uh oh. Last round every time. Weak mag tube spring probably. Yes, you need a stronger or just a little longer spring to increase preload for the last shell. Link to comment Share on other sites More sharing options...
cas Posted November 12, 2019 Share Posted November 12, 2019 Funny that the common malfunction is the only one I'm not having. Okay, maybe it isn't funny. Link to comment Share on other sites More sharing options...
Eagle4 Posted November 12, 2019 Share Posted November 12, 2019 CAS have you tried to bend the spring ? Link to comment Share on other sites More sharing options...
021411 Posted November 13, 2019 Share Posted November 13, 2019 I have a match coming up so I put the AccuGuide lifter back in. I don’t 100% trust the auto lifter yet. I’ll re-visit it at a later date. Link to comment Share on other sites More sharing options...
travail Posted November 18, 2019 Share Posted November 18, 2019 Used the MOA lifter all season without issue on a M2. Took a small break in period but was good to go after a few hundred rounds. Link to comment Share on other sites More sharing options...
021411 Posted November 18, 2019 Share Posted November 18, 2019 1 hour ago, travail said: Used the MOA lifter all season without issue on a M2. Took a small break in period but was good to go after a few hundred rounds. Tell your friends over at MOA to make more. I even asked them if I could send my trigger group in. No response.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now