ffl Posted May 1, 2014 Share Posted May 1, 2014 The International Revolver Championship has been a world class match for the last 22 years and this year is no different. We are proud to announce some major changes to this years IRC signature stage Far and Near. There will be turning target arrays for Far and Near so as to eliminate the bottleneck of this stage and bring world class target systems to our match. We will be running 3 shooters simultaneously through the stage at once and this will allow us to speed up the match not only for our RO's but for the competitors as well. A long with the turning targets there will be some changes to the stage procedure as well. 1. There will not be a overtime shot penalty as the target turns at the end of time. (This was to keep people from stacking shots and getting the hits as we could not determine what the last shot was. so the penalty was stiff) 2. There will be a penalty for an extra shot fired as per rule book 3. If a bullet is more than 1-1/2 diameters the shot does not count (ie skidders or shots fired after time has expired) Link to comment Share on other sites More sharing options...
Gregg K Posted May 1, 2014 Share Posted May 1, 2014 Will it be a visual start as in when the targets start to apear? Link to comment Share on other sites More sharing options...
ffl Posted May 1, 2014 Author Share Posted May 1, 2014 We will still have the audio start as the alternate position at 50yds does not allow you to see the targets turn. We may not have them at the other distances. Link to comment Share on other sites More sharing options...
seanc Posted May 2, 2014 Share Posted May 2, 2014 We will still have the audio start as the alternate position at 50yds does not allow you to see the targets turn. We may not have them at the other distances. It is going to be same COF, 6 targets, 36 shots? Link to comment Share on other sites More sharing options...
LCARICH Posted May 2, 2014 Share Posted May 2, 2014 Yes, 6 targets, 36 shots in 36 seconds. Rich Link to comment Share on other sites More sharing options...
Dogged Posted May 4, 2014 Share Posted May 4, 2014 Will there be a black x ring? Link to comment Share on other sites More sharing options...
ffl Posted May 5, 2014 Author Share Posted May 5, 2014 yes there will be Link to comment Share on other sites More sharing options...
Ty Hamby Posted May 6, 2014 Share Posted May 6, 2014 (edited) 160 grain bullet traveling @ 787fps will arrive at the target 0.1905 seconds after it left the barrel. If the timer allowed up .3 tenths beyond par, I suspect to stay consistent we would get another 2 tenths to support the flight time of the projectile. Is this just wishful thinking? Edited May 6, 2014 by Ty Hamby Link to comment Share on other sites More sharing options...
Bubber Posted May 8, 2014 Share Posted May 8, 2014 Ty, the .30 overtime was what was calculated for the targets to turn from the end of the time allowed. I am interested in how it will work out. Link to comment Share on other sites More sharing options...
seanc Posted May 8, 2014 Share Posted May 8, 2014 Ty, the .30 overtime was what was calculated for the targets to turn from the end of the time allowed. I am interested in how it will work out. That makes sense. I will be watching RO's shoot on thursday for sure to try and get an idea of what this will be like. I've watched plenty of bianchi video's, so I get it but you really need to be paying attention... Link to comment Share on other sites More sharing options...
ffl Posted May 8, 2014 Author Share Posted May 8, 2014 the .3 was added to the rule book to mirror USPSA and it is supposed to be the reaction time from hearing the horn on a par time stage and your not pulling the trigger. The horn is typically .3 secs long. Turning targets are basicly the same. I have never timed the targets at the Bianchi Cup to see if they include a .3 turn time. I suspect that they don't. As to whether we set the time to .3 longer that is to be determined as we will test the array before the IRC and make the determination at that time. David Link to comment Share on other sites More sharing options...
sargenv Posted May 14, 2014 Share Posted May 14, 2014 Hmm, sounds interesting.. and I'm going to miss it this year.. aw well.. looking forward to what people say about it.. It's certainly going to now be different enough.. Link to comment Share on other sites More sharing options...
ZachLee Posted May 20, 2014 Share Posted May 20, 2014 I am curious about the one and a half times the bullet diameter being scored as a miss. I don't remember seeing this in the rule book. Link to comment Share on other sites More sharing options...
ffl Posted May 20, 2014 Author Share Posted May 20, 2014 The stage description will indicate the 1-1/2 times dia. as a miss. This is standard rules for turning targets. this keeps a person from shooting a skidder that passes 2 scoring rings or was shot late. the .3 time is irrevlellent as the target time will be set at say 5 secs. you will have 5 seconds of shooting time and then the target will turn. Just remember that sound travels slower than light. you will see the target turn faster than you will hear a buzzer. dcs Link to comment Share on other sites More sharing options...
Bubber Posted May 22, 2014 Share Posted May 22, 2014 Had an incident today. Two rounds close enough together to be deemed a bullet and a half on target, Only problem was that it was not on a turning target. It is an issue one may want to study on prior to the IRC. Roger Davis Link to comment Share on other sites More sharing options...
ZachLee Posted May 22, 2014 Share Posted May 22, 2014 That is a good point. I had been thinking about a tumbling bullet. When I was taping targets at the SW Regional one of the targets sure had what looked like a sideways bullet. I would hpoe something like that would not be counted as a miss. Link to comment Share on other sites More sharing options...
seanc Posted May 22, 2014 Share Posted May 22, 2014 That is a good point. I had been thinking about a tumbling bullet. When I was taping targets at the SW Regional one of the targets sure had what looked like a sideways bullet. I would hpoe something like that would not be counted as a miss. How was it handled? the uspsa rule book does not discuss this at all except in determining if elongated holes are from richochets/splatter. Link to comment Share on other sites More sharing options...
seanc Posted May 22, 2014 Share Posted May 22, 2014 Had an incident today. Two rounds close enough together to be deemed a bullet and a half on target, Only problem was that it was not on a turning target. It is an issue one may want to study on prior to the IRC. Roger Davis I predict there will many elongated holes on far and near and I hope they have a good procedure for dealing with it. Link to comment Share on other sites More sharing options...
jhgtyre Posted May 22, 2014 Share Posted May 22, 2014 Had an incident today. Two rounds close enough together to be deemed a bullet and a half on target, Only problem was that it was not on a turning target. It is an issue one may want to study on prior to the IRC. Roger Davis I predict there will many elongated holes on far and near and I hope they have a good procedure for dealing with it. From this previous post it seems they do have a procedure in place. The stage description will indicate the 1-1/2 times dia. as a miss. This is standard rules for turning targets. this keeps a person from shooting a skidder that passes 2 scoring rings or was shot late. the .3 time is irrevlellent as the target time will be set at say 5 secs. you will have 5 seconds of shooting time and then the target will turn. Just remember that sound travels slower than light. you will see the target turn faster than you will hear a buzzer. dcs Link to comment Share on other sites More sharing options...
Ty Hamby Posted May 23, 2014 Share Posted May 23, 2014 The 10 second clock starts as the target turns. The last shot leaves the barrel @ 9.85sec. from when the clock started. Due to a .2sec flight time the bullet gets to the target after it turns back and will be scored a miss. How can a target not be available for shots fired withing the 10 second par? (160 grain bullet traveling @ 787fps will arrive at the target 0.1905 seconds after it left the barrel.) Not critical just taking note. Link to comment Share on other sites More sharing options...
ZachLee Posted May 24, 2014 Share Posted May 24, 2014 That is a good point. I had been thinking about a tumbling bullet. When I was taping targets at the SW Regional one of the targets sure had what looked like a sideways bullet. I would hpoe something like that would not be counted as a miss. How was it handled? the uspsa rule book does not discuss this at all except in determining if elongated holes are from richochets/splatter. Link to comment Share on other sites More sharing options...
ZachLee Posted May 24, 2014 Share Posted May 24, 2014 The elongated hole was counted as a hit. this was on a static target without any hardcover. Link to comment Share on other sites More sharing options...
hearthco Posted May 28, 2014 Share Posted May 28, 2014 The 10 second clock starts as the target turns. The last shot leaves the barrel @ 9.85sec. from when the clock started. Due to a .2sec flight time the bullet gets to the target after it turns back and will be scored a miss. How can a target not be available for shots fired withing the 10 second par? (160 grain bullet traveling @ 787fps will arrive at the target 0.1905 seconds after it left the barrel.) Not critical just taking note. More powder! Link to comment Share on other sites More sharing options...
Carmoney Posted May 28, 2014 Share Posted May 28, 2014 (edited) Regarding the elongated bullet issue, the far better approach would be to simply score any shot that fully penetrates the target, regardless of the angle, as a hit on the highest scoring area the bullet passes through. This one and a half diameters stuff is going to cause big trouble--(you gonna have one guy assigned the job during the entire match to objectively and fairly run the dial calipers?)--and the difference between an X and a miss is HUGE. Edited May 28, 2014 by Carmoney Link to comment Share on other sites More sharing options...
No.343 Posted May 28, 2014 Share Posted May 28, 2014 I used to shoot a little bullseye. We called them skidders. I have no idea if I spelled that right. Turning targets where used in that game. When we had an "elongated bullet issue" they would score the shot as one ring lower scoring value than the last mark made by the bullet. That system didn't seem to cause much controversy and there were a lot of doubles in that game. The way a bullet tore through those thin paper targets made it obvious when a shot was fired at a turning target. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now