Front Man Posted December 19, 2011 Share Posted December 19, 2011 Its a LIMCAT mount. Thanks Brit! Link to comment Share on other sites More sharing options...
Neomet Posted December 19, 2011 Share Posted December 19, 2011 Frontman, FWIW I have used both the Limcat and the Arredondo mount for our DP. Of the two the Mrs and I both prefer the the Arredondo which sits a bit further back, with the rear edge of the sight just in front of the rear edge of the barrel. One thing to keep in mind about mounting this sight further down the slide is that the window is not that large to begin with and every little bit further it is away from your eyes the smaller it will appear. The Arredondo is lower to the slide which is nice, but not a compelling reason pick it over the Limcat. It is so low in fact that if your slide is not flattopped you may need to cut down the underside of the mount. Link to comment Share on other sites More sharing options...
CCL Posted December 19, 2011 Share Posted December 19, 2011 Frontman, FWIW I have used both the Limcat and the Arredondo mount for our DP. Of the two the Mrs and I both prefer the the Arredondo which sits a bit further back, with the rear edge of the sight just in front of the rear edge of the barrel. One thing to keep in mind about mounting this sight further down the slide is that the window is not that large to begin with and every little bit further it is away from your eyes the smaller it will appear. The Arredondo is lower to the slide which is nice, but not a compelling reason pick it over the Limcat. It is so low in fact that if your slide is not flattopped you may need to cut down the underside of the mount. Neomet, what's your opinion on the DP vs a C-more now that you've been shooting it awhile now? I've been thinkning about trying one next season. Thanks ccL Link to comment Share on other sites More sharing options...
Front Man Posted December 20, 2011 Share Posted December 20, 2011 Thanks Neomet; I am already flat topped and will consider the Arredondo as being as low as possible is important to me. I didn't see one on the Limcat web page. I'm with CCL can we get your opinion of a DP vs. CMORE? Link to comment Share on other sites More sharing options...
Neomet Posted December 20, 2011 Share Posted December 20, 2011 (edited) Okay guys, here you go. First a couple caveats. This is just two people's opinions with a sprinkling of comments from others who I know who have tried both. YMMV. As a background I am a B Open shooter and Leslie is a newly minted C Open shooter. I should also say that I tried both the triangle and the dot. Much, much prefer the dot. To me both appear larger than their stated MOAs compared to the Cmore and just a guess but I am not sure the MOAs are measured with the lens the same distance from the eye so it is not an apples to apples comparison. The delta looked huge to me. As in too huge. I know others like it but I am used to a 6MOA Cmore and the DP dot is maybe a little smaller, depending on the diode you get from Cmore. Brightness: 90% of my matches are shot in bright desert sun with no clouds. I have no problem with seeing the DP dot or my Cmore if I use a Limcat glare shield. Winner: Tie. Glass: The DP glass is head and shoulders above the Cmore. It is startling the first couple time you look through it. I have never been impressed with the clarity of the Cmore lens. Winner: DP Proximity to bore axis. With the DP I zero at 20 and in any match situation short of a target pressing on the muzzle I put the dot where I want the bullet to go. Not so much with the Cmore. Then again I used to shoot a vertical Cmore and since we always know the distance of our targets before we shoot a COF that was never an issue. Plus there is always the 90 degree mount although I am not a fan of those. Winner: If you like a 90 degree mount: Tie. If you have a vertical and hate playing the over/under game: DP If you don't mind the over/under game: Tie Adjusting/holding zero: First things first. Take that moronically small torx wrench they give you with the DP and throw it far, far away. You will think the sight adjustments are junk if you try to use that wrench. Go pick up a quality torx driver (looks like a small screwdriver) at Lowes for about $5:00. Once you have done that the DP is fairly easy to adjust. You have to loosen the two locking screws for any adjustment and the markings on the sight are essentially useless, but I was able to zero mine in 12 rounds. I have never had to adjust the sight since then. I have had more than my share of issues with Cmore adjustments. Locking screws that don't, drifting zeros, blah, blah, blah... all leading to a general distrust in the zero, which is something I would prefer to not have on my mind as I step into the box. Winner DP Construction: The Cmore frankly looks cheap to me. I am not a fan of plastic for optics. The locking screws have all the sophistication of a small wood screw. The DP appears to be very well constructed. Yeah, it is small, as are the adjusting screws but that is a function of the size of the unit. Winner: DP Battery life: I have no idea why the Cmore uses such an expensive, relatively obscure, and for me at least, short lived battery. God forbid you forget to turn the sight off after the first day of a two day match. I got a battery for the DP at Walgreens for when I need to change it sometime next year and you never turn the DP off. Winner: DP Okay, the big question... Will I have trouble finding the dot in the smaller window? The short answer is that the DP does require a proper presentation. A larger chunk of glass lets you get away with being sloppy. We would always see the dot if we started using recycled Pinto windshields as lenses. I really don't like that answer. If I am presenting and the dot is on the edge of the Cmore glass at 1:00 I then need to adjust before firing the shot. I prefer to know I have to be more precise which will ultimately reduce how long it takes me to get a shot off. While it is antidotal evidence Leslie is new to competitive shooting, yet she has had no issues finding the dot with the DP. If you have a tendency to short stroke your presentation you will lose the dot much easier on the DP than the Cmore. (Don't ask me how I know) I also think it can take some getting used to if you are used to the big Cmore being up there. Summary: While in a perfect world I might like a slightly larger lens on the DP, it's low clean design, battery life, superior glass, set it and forget it zero, and nice dot carry the day for me in the comparison. I know several other shooters however who have tried it and gone back to the Cmores. I'm sure there are some here that might chime in as well. If you are ever in the Phoenix area let me know and I'd be glad to let you see mine. Edited December 21, 2011 by Neomet Link to comment Share on other sites More sharing options...
CCL Posted December 20, 2011 Share Posted December 20, 2011 Finally a detailed reveiw of the DP! Queston: During recoil do you lose the dot on the smaller lens of the DP? Looks like I may have to try one. Thanks Neomet and nice job. ccL Link to comment Share on other sites More sharing options...
Neomet Posted December 21, 2011 Share Posted December 21, 2011 Thanks CCL. I do not lose the dot on recoil. That said, how much a dot moves during recoil is dependent on the gun, the load, and the shooter's grip so there is no guarantee that it won't for anyone else. Link to comment Share on other sites More sharing options...
Front Man Posted December 21, 2011 Share Posted December 21, 2011 I'm sold on your review Neomet. I hate the over under game. And having to spend a small fortune to keep the CMORE zeroed. Link to comment Share on other sites More sharing options...
simar Posted December 21, 2011 Share Posted December 21, 2011 whats involved in replacing batts on the DP? I like the cmore-sts battery compartment best so far for that. Link to comment Share on other sites More sharing options...
ChuckS Posted December 21, 2011 Share Posted December 21, 2011 whats involved in replacing batts on the DP? I like the cmore-sts battery compartment best so far for that. The battery just goes in the bottom of the sight before it is mounted. Link to comment Share on other sites More sharing options...
fred5876r Posted December 21, 2011 Share Posted December 21, 2011 I have a DP on a Allchin mount on my 617 and I had to change the battery before a recent pintops match, so I didn't have a chance to check the zero after the off-and-on. No problem, the zero did not change one iota. With that in mind, I think all the battery tray does on the STS is to make the lens & dot sit higher and farther from the bore. I do like the looks of the new RTS with its larger lens. Link to comment Share on other sites More sharing options...
digby7 Posted December 25, 2011 Share Posted December 25, 2011 ive been watching this thread with some interest for a bit now. I currently have a quinn II on a sti steelmaster and am thinking of giving this a whirl. 2 questions: - will i have a easier transitioning back to limited with a quinn II/cmore or deltapoint on a arrondendo mount? - wheres the cheapest place to buy a 3.5 moa cross slot deltapoint? Link to comment Share on other sites More sharing options...
TerryO Posted December 25, 2011 Share Posted December 25, 2011 1324503022[/url]' post='1597063']I have a DP on a Allchin mount on my 617 and I had to change the battery before a recent pintops match, so I didn't have a chance to check the zero after the off-and-on. No problem, the zero did not change one iota. With that in mind, I think all the battery tray does on the STS is to make the lens & dot sit higher and farther from the bore. I do like the looks of the new RTS with its larger lens. I was always concerned about this, not sure if it would have to be re-zeroed. At a match this fall I had my first dead battery since switching to the DP late last year. Funny thing, when it went dead it went dead right now. It was there at the safe area and when I went to the first stage at LMR it was gone. Husseled over to the safe area, popped the sight, swapped batteries, shot the stage thinking, "oh we'll, it will be whatever it is." To my surprise no change in zero at all, still got a mike, so the long and short, changing battery won't make you more accurate shooter. So I shot the DP for a full season and now I'm contemplating going back to c-More. Why, I'm not sure which I shoot better with. I've got two identical guns coming from Shay at Akai. I think I'll put the DP on one and the upright c-More on the other and maybe by this time 2012 I'll be convinced as to which I like better. Link to comment Share on other sites More sharing options...
tt350z Posted December 26, 2011 Share Posted December 26, 2011 (edited) ive been watching this thread with some interest for a bit now.I currently have a quinn II on a sti steelmaster and am thinking of giving this a whirl.2 questions:- will i have a easier transitioning back to limited with a quinn II/cmore or deltapoint on a arrondendo mount?- wheres the cheapest place to buy a 3.5 moa cross slot deltapoint? For #2, check out promotive.com and see if you qualify for the Leupold Tactical Pro Team. I just placed an order for the 3.5 moa DP with all mounts for $335 shipped. The cross slot only version is $298.45 shipped. Edited December 26, 2011 by tt350z Link to comment Share on other sites More sharing options...
digby7 Posted December 26, 2011 Share Posted December 26, 2011 thanks for the feedback, i gave promotive a shot but not sure i can get on any of the teams. Also curious how zero at different distances work? I have horrible memories of my normal mount c-more hitting 3 inches low or high depending on what distance i was shooting at. The sideways mount made it better but it would still be 1-2 inches off at times. Curious if I zero at say 20 yards if it will be almost dead on from 5-20 and then aim a inch low or so at 25+ Link to comment Share on other sites More sharing options...
BlueOvalBruin Posted December 28, 2011 Share Posted December 28, 2011 How is the DP on a JV or Arredondo mount compared to a side-mounted cmore? Is there much difference in the height of the dot from the top of the slide? Is the smaller window very noticeable? Link to comment Share on other sites More sharing options...
TerryO Posted December 28, 2011 Share Posted December 28, 2011 I've never used the sideways mount for a c-More but the DP on the Arredondo mount is much better balanced and less obtrusive in my opinion. As far as dot to bore relationship it's probably about the same. Link to comment Share on other sites More sharing options...
KentG Posted December 28, 2011 Share Posted December 28, 2011 I have a DeltaPoint but it's on my Akdal in the 7 min triangle flavor. I really like it a lot and now I'm debating between it and the Cmore RTS for my open pistol. I'd like to see a RTS in person. Link to comment Share on other sites More sharing options...
Neomet Posted December 28, 2011 Share Posted December 28, 2011 After horsing around with my 90 degree mount and the DP for a bit I can't tell which is lower. It is so close that for all practical purposes there is no difference in dot height. Link to comment Share on other sites More sharing options...
BrianATL Posted December 28, 2011 Share Posted December 28, 2011 I have a DeltaPoint but it's on my Akdal in the 7 min triangle flavor. I really like it a lot and now I'm debating between it and the Cmore RTS for my open pistol. I'd like to see a RTS in person. Has anyone tried both of these?? Link to comment Share on other sites More sharing options...
tt350z Posted December 28, 2011 Share Posted December 28, 2011 I have a DeltaPoint but it's on my Akdal in the 7 min triangle flavor. I really like it a lot and now I'm debating between it and the Cmore RTS for my open pistol. I'd like to see a RTS in person. Has anyone tried both of these?? This guy has a DP and a STS, it's the closest to the RTS I've found so far. There's a bunch of pics in there so it may take awhile to load. http://www.brianenos.com/forums/index.php?showtopic=132423&view=findpost&p=1490991 Link to comment Share on other sites More sharing options...
Smokin Posted December 29, 2011 Share Posted December 29, 2011 problem with the RTS is that it comes with an integral rail. It would be great if they made a rail-less version. Link to comment Share on other sites More sharing options...
Neomet Posted December 29, 2011 Share Posted December 29, 2011 Rumor, unsubstantiated rumor at that, is that will be the next variation. Link to comment Share on other sites More sharing options...
Smokin Posted January 1, 2012 Share Posted January 1, 2012 Does anyone have issues with their Deltapoint getting caked with exhaust gasses since there is no blast shield for these red dot sights? Link to comment Share on other sites More sharing options...
BlueOvalBruin Posted January 2, 2012 Share Posted January 2, 2012 I have the same problem with the side mounted cmore. My hybrid ports take a dump on the lens on every shot and it needs to be cleaned every stage. Wiping the lens becomes part of the workflow though so its not much of a problem anymore. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now