DougCarden Posted April 2, 2010 Share Posted April 2, 2010 I did a couple of MP triggers today, got the Apex sear and safety plunger from SpeedShooter specialties in record time, as usual. I have a 9L that is at 2.5lbs using the stock sear-worked over by me, a me-modified plunger, cut down spring, and my own internal overtravel pin on the sear block housing. I did a .40 today with the Apex sear and safety plunger. FWIW, to have the same spring weight as the one from Apex, I ended up cutting the stock spring down 5 coils. It is really close on the trigger gauge. By putting in the Apex safety plunger/spring and the sear I got the trigger down to a crisp 4lbs. I then polished the bejeezus out of the sear and the rear edge, and I got it to just over 3lbs. You wont be sorry getting the Apex parts, they are well made and take less work than the factory sear to modify for a nice trigger. FWIW, DougC Link to comment Share on other sites More sharing options...
SixShooterPerry Posted April 3, 2010 Share Posted April 3, 2010 Did the same thing about 3 weeks ago. Apex makes a great part!! SSS sent the stuff in record time. Also installed a Burwell rear sight.....nice sight!!!! Will give it all a workout next week at the SC Sectional and the following week at Area 6....can't wait!! Link to comment Share on other sites More sharing options...
DougCarden Posted April 3, 2010 Author Share Posted April 3, 2010 Yep, I am waiting on my Burwell sight so I can finish off the gun and take it to the range to file down the front to POI. Good stuff for sure! DougC Link to comment Share on other sites More sharing options...
Smithars Posted April 3, 2010 Share Posted April 3, 2010 I have the 9 pro. Is the apex sear different enough from the stock one in the pro to make it worth it? I've not had anything done on my trigger yet but I'm planning on it in the future.h Link to comment Share on other sites More sharing options...
diehli Posted April 3, 2010 Share Posted April 3, 2010 I have the 9 pro. Is the apex sear different enough from the stock one in the pro to make it worth it? I've not had anything done on my trigger yet but I'm planning on it in the future.h Link to comment Share on other sites More sharing options...
G-ManBart Posted April 3, 2010 Share Posted April 3, 2010 I have the 9 pro. Is the apex sear different enough from the stock one in the pro to make it worth it? I've not had anything done on my trigger yet but I'm planning on it in the future.h I put an Apex sear in my Pro and it is better than stock. Definitely get the Apex firing pin safety plunger and spring as well. Put those parts in and you're almost certain to like the trigger better....smoother, crisper, lighter and a shorter reset. R, Link to comment Share on other sites More sharing options...
G-ManBart Posted April 3, 2010 Share Posted April 3, 2010 In case anyone wants to read the other thread on these: http://www.brianenos.com/forums/index.php?showtopic=100530&view=findpost&p=1146764 Link to comment Share on other sites More sharing options...
CatsEye Posted April 5, 2010 Share Posted April 5, 2010 I recently installed the Apex sear and FP block in my Pro. It is well worth it. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 10, 2010 Share Posted April 10, 2010 (edited) Doug: Are you cutting down the STRIKER spring? And the gun still runs? I went 2 coils down on one, and it wouldn't eat Winchester primers worth a damn. Mine stays stock. My trigger is a smooth & crisp 4lbs 11oz with no overtravel, and I really like it how it is. That's just two or three hours spent on a DIY triggerjob, no aftermarket parts or spring changes. Edited April 10, 2010 by MemphisMechanic Link to comment Share on other sites More sharing options...
DougCarden Posted April 10, 2010 Author Share Posted April 10, 2010 Nope, Plunger spring. Sorry for the confusion. You can cut two coils off the striker spring and run Federal primers well seated, but that is it....It will take about a 1/2 lb off the pull, but unless you have a boatload of Federals on the shelf it isn't worth it. A crisp 3lb trigger with no overtravel is pretty hard to beat! This is my experience...Use with caution... DougC Link to comment Share on other sites More sharing options...
GaryXD Posted April 11, 2010 Share Posted April 11, 2010 I put the Apex sear and striker block in three guns this weekend. It made a lot of difference and was very easy to install. Link to comment Share on other sites More sharing options...
Lonnie Posted April 21, 2010 Share Posted April 21, 2010 Installed one this weekend in my M&P9. What a super improvement! And, the service from SSS was great with cheap shipping. Link to comment Share on other sites More sharing options...
bunsen27 Posted April 26, 2010 Share Posted April 26, 2010 I received my Apex hard sear and striker block on Sat. I had them installed in ~20 min after watching the instructional videos, then following along. Very easy to install and the resulting trigger is exceptional! I don't have a pull weight scale for exact poundage but ir feels just touch heavier than my 3.5 lbs Sig trigger, so I'm guestimating ~4 lbs. Very smooth with a significant reduction in reset (40-50%). Still not an exceptionally tactile feeling reset, but with the short reset I'm not sure it will matter much. I didn't install the reduced power spring for the striker block (being overly cautions), but I will likely go back and install it. Flork, what exactly does the reduces striker block spring help with again? Thanks again to Apex for the great parts! I'll be very interested to see what other aftermarket M&P parts Apex cooks up in the future. A striker or trigger bar perhaps? Link to comment Share on other sites More sharing options...
High Lord Gomer Posted April 26, 2010 Share Posted April 26, 2010 I installed the Apex seer and plunger with lighter spring on a couple of M&Ps...LOVE THEM! I had a few light primer strikes in a couple of M&Ps (after 10K and 35K rounds, respectively) so I run the extra power striker springs in all of them, now. With the way the Apex seer is cut, it doesn't seem to push the striker back much, if at all, so the weight of the striker spring doesn't seem to affect the trigger pull when using the Apex seer. All but my carry M&P will be getting those parts (I prefer the stiffer trigger on the carry gun). Link to comment Share on other sites More sharing options...
Flork Posted April 26, 2010 Share Posted April 26, 2010 Flork, what exactly does the reduces striker block spring help with again? Thanks again to Apex for the great parts! I'll be very interested to see what other aftermarket M&P parts Apex cooks up in the future. A striker or trigger bar perhaps? Thank you for your kind comments. The reduced Striker Block Spring is designed to help smooth up the operation of the Striker Block. Being slightly lighter, it reduces drag on the upward movement of the Striker Block to reduce felt disengagement of the Striker Block while the trigger is being pressed. We are working on a billet striker and trigger bar. They're a bit farther down the road, but they're on the drawing board. Scott Link to comment Share on other sites More sharing options...
DocMedic Posted April 27, 2010 Share Posted April 27, 2010 We are working on a billet striker and trigger bar. They're a bit farther down the road, but they're on the drawing board. Scott Stop making me spend money Link to comment Share on other sites More sharing options...
Flork Posted April 29, 2010 Share Posted April 29, 2010 Sorry bro Link to comment Share on other sites More sharing options...
Shenaniguns Posted May 1, 2010 Share Posted May 1, 2010 We are working on a billet striker and trigger bar. They're a bit farther down the road, but they're on the drawing board. Scott Stop making me spend money If they keep going like they are it will never stop Link to comment Share on other sites More sharing options...
CenTX Posted May 3, 2010 Share Posted May 3, 2010 I bought a used S&W Pro, 750 rounds, trigger felt horrible, very gritty, but weighed about 4 lb. 7 oz.. Put in the Apex sear and block, then honed the striker hook a bit to smooth it up. Now breaks about 3 lb. 10 oz. and feels very good. Link to comment Share on other sites More sharing options...
DocMedic Posted May 11, 2010 Share Posted May 11, 2010 I know this is a little in the future but with the trigger bar, will it provide more of a positive / audible click for trigger reset? Link to comment Share on other sites More sharing options...
Shenaniguns Posted May 11, 2010 Share Posted May 11, 2010 Apex Tactical's Fail Resistant Extractor is officially for sale... http://apextactical.com/hp_zencart/index.php?main_page=product_info&cPath=7&products_id=28 Link to comment Share on other sites More sharing options...
Sullie Posted June 2, 2010 Share Posted June 2, 2010 I had been looking at the M&P at the local gunstore for quite awhile. The gun pointed well, the controls were all located just perfectly for me, it just felt right......until I would pull the trigger. The pull was rough and gritty. Well, a friend let me borrow two of his M&P's that he had done some trigger work to. What a difference! This convinced me that the trigger could be made significantly better and then the whole package would be just right. I bought my M&P 9mm and did my own trigger job on it with good results. About a week ago somebody gave me an Apex sear. I dropped it in and it was even better than my own trigger job. The reset especially was much shorter. I am thrilled at what a difference it makes in the shootability of this gun. Well done! Link to comment Share on other sites More sharing options...
diehli Posted June 8, 2010 Share Posted June 8, 2010 I've been dryfiring my M&P9 since I got it. I'd gotten comfortable with the trigger which, by my estimation, was north of 6 lbs (my trigger scale only goes to 4.5). Put in the sear and USB today. Trigger's breaking at about 3.875 lbs (3 lbs, 14 oz) and the USB completely got rid of the first break in the trigger pull (when the tang on the trigger bar got around the corner on the SB). I think I'll eventually have a 'smith do a trigger job, but this is a vast improvement. Well done, Randy & Apex. Also took the opportunity to pull out the magazine safety and the sear deactivation lever and the associated parts and put on an all-black rear sight. Glock-like simplicity in takedown. Sight picture is SO much better. Heck, the white dot on the front sight doesn't bother me now that the rear ones are gone. Link to comment Share on other sites More sharing options...
millisec Posted June 10, 2010 Share Posted June 10, 2010 I got mine and put it in on Monday and love it. One thing I would point out is most of the benefits would seem to be realized with a non M&P Pro. My Pro trigger was pretty good to start with but it is now a little smoother, crisper and lighter. Like the example in the Apex video maybe .5 pounds off. If you compare the parts to the Burwell job they are basically saving you having to reshape and polish the hump at the rear and hardening the sear. The original Pro sear, like the Apex, already has the sear modification for over travel. I had actually already installed my sear and stiker block before I saw the Burwell PDF. But I went back and did the few extra steps not covered by using the Apex parts (also no further rounding of striker block needed). The Apex videos are good but I would use them hand in hand with the Burwell pdf. I could not find any polishing felt for my dremel and I used a small folded piece of 1500 grit sand paper and a hard flat surface. If your stiker is pretty good to start with I don't see any need to cut/polish with a stone and a little polishing does the trick (you also avoid using a vise on its plastic sleeve). A little extra effort but it did the job. If you add the Apex sear, stiker block and do the simple Burwell tasks for Polish trigger bar where it contacts sear. Polish the striker face. Polish the trigger bar where it contacts the striker block. You probably won't get much better. Maybe when I get up the motivation to take on that pressed pin I will put in the Apex extractor. Course by then Apex will probably have something else to buy Link to comment Share on other sites More sharing options...
Sullie Posted June 10, 2010 Share Posted June 10, 2010 I've been dryfiring my M&P9 since I got it. I'd gotten comfortable with the trigger which, by my estimation, was north of 6 lbs (my trigger scale only goes to 4.5). Put in the sear and USB today. Trigger's breaking at about 3.875 lbs (3 lbs, 14 oz) and the USB completely got rid of the first break in the trigger pull (when the tang on the trigger bar got around the corner on the SB). I think I'll eventually have a 'smith do a trigger job, but this is a vast improvement. Well done, Randy & Apex. Also took the opportunity to pull out the magazine safety and the sear deactivation lever and the associated parts and put on an all-black rear sight. Glock-like simplicity in takedown. Sight picture is SO much better. Heck, the white dot on the front sight doesn't bother me now that the rear ones are gone. What is the USB? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now