CZGeoege

Get your self a mighty armory sizing die. they are expensive but worth every dollar. It Sizes the case farther then a lee U die. It’s hard to tell in the pic, but it leaves 1/16th unsized on the bottom of the case. But if you roll size or bulge bust that takes care of that area anyhow.

Agreed

HM10 for 10% off

Anyone notice all the lead in the barrel from these DG bullets?

Anyone notice this? my load is 4.5gr of sport pistol @ 1.175 using 180gr DG and just enough “crimp” to remove the bell.

Watch out for Aguila brass that stuff bulges all the time..

Have you tried the Redding competition seating die?

It’s my TSO, Metal guide rod with a buffer. What’s a barrel kidney?

I run a 14lb recoil spring and a Wolff 20lb Hammer spring, 170PF ammo.

Zero hang ups, they work great

What’s the issue here? I have nothing to sell, just scrolling through here and responding to posts..

Any update on old boys ammo issue?

I use a mighty armory size/deprime die MR bullet feeder powder drop redding comp seating die dillon crimp die never needed a Lee FCD , I also never get and rejects in the hundo.

I have been loading my TSO with sport pistol too. 180gr DG COL 1.170 4.5 gr sport pew federal spp 170PF

Did the new one solve your problem?

So I bought the die, I’m very impressed with it. I feel that is does a better job than my Dillon die. It seems to be a much more expensive version of a Lee U die.

Mine came today too, and I have my MBF setup perfect. I. Kinda not looking forward to changing it..

So I have been loading 4.5gr of sport pistol under a 180gr DG bullet at 1.170 , makes major PF at 171. Anyone else use this same combo for the TSO?

I use a lee undersized die and a FCD , I’m getting much better ammo as a result of the Lee dies. I only use the Dillon seating die , but that’s going to change to a Redding competition seating die Very soon.

Mine is on the way, I hope it does the job well on my 40 cal press.

I installed this die and I’m very pleased with it, it definitely wasn’t hard to setup like some peopLe Here suggested. Makes my 40 cal ammo even better, I wonder if this die will lower extreme spread and SD when I chrono the new ammo. thoughts?

Performance definitely comes from within and is also elevated with good or great gear and equipment. Ive never seen anyone win a division or get an overall win using a highpoint pistol..

When I load 40, my final station is only taking out the bell from flaring, that’s it. The case wall when properly sized is enough to hold the bullet in place. Even setback isn’t an issue this way.

East coast reloading sells once fired brass..

Probably the most ridiculous thing I’ve read all day....