Jump to content
Brian Enos's Forums... Maku mozo!

chefjay

Members
  • Posts

    7
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

chefjay's Achievements

Looks for Range

Looks for Range (1/11)

  1. Should I stay away from certain headstamps for shooting 9mm major???I can get once fired Speer brass for $9/1000 or all Winchester for $20/1000....Will the Speer be okay for the high pressure or should I pay the extra and get the Winchester.... Thanks
  2. I have and open glock and have tried using WSF for Major 9...as recommended by my gunsmith...Does any one have any experience with WSF for major 9?? I have tried HS-6 but the gun was not reliable enough....Any info would be helpful..... Thanks
  3. Sorry I have not replied lately...But the gun has now been sent to Tom Novak at Handgunner Outlet to be repaired...He is telling me the chamber seems to be too short.....So hopefully he will fix it correctly because the chamber was reamed twice by BrianH and still failed to function...By the way tahnks for all the help... Chefjay
  4. I have a major nine glock that has a comp and briley barrel fit by BrianH....Evrything seems okay but any ammo loaded with brass other than RP, WIN, or FC headstamp will not chamber properly...I am now using a EGW U die for sizing I am loading to 1.135"...It seems the extractor could be the problem because brass other than tose three type will not slide under the extractor....I had the wrong extractor in the gun and the right one helps a little....I am going to range test it tonight....Can the extractor be filed down and tuned a little to help the feeding problem???Also should I cut any springs off the 13lb recoil spring????Thanks
  5. I am having trouble with my major nine Glock...It has a Briley barrel and it seems to only like winchester brass and sometimes RP brass is there a reason for this....And info would be great.. Any other brass gets caught up on the extractor and the gun will then not go into battery......Thanks
  6. I bought a EGW u die for 9mm...With the die properly installed it resizes great but the problem I am having is that when the round goes into the seating station and the bullet is seated the round comes out with a visable bulge around the base of the bullet uo until the top of the case and of course this keeps the round from chambering in the gun...Does anyone have any input on this problem???? Thanks
  7. I am wondering if anyone can help me with my problem with my major 9 G17...It has a 13lb recoil spring, tungsten rod, a briley barrel with a comp that has 4 up ports and 4 side ports....The problem is that the slide will not go full back into battery...It only hangs up about 1/16th of and inch...The gun was finished by BrianH and he told me that it is just tight and needs to be broken in...I have about 300 round through it already but it is getting better...Last night I got 5 shots in a row off...The load I am using is 8.6gr HS-6, 124gr Zero FMJ, 1.135" oal, WSP primers...If anyone has any suggestions that would be great.....Thanks
×
×
  • Create New...