PGGUNS

Well I’ve started my “purge” of guns sitting in my safe to fund my open purchase. Once I sell my JP PCC I’ll be on my way to open with the purchase of a PT Honcho, I was leaning to the Atlas but I think I’m gonna give the honcho a try. Hear really good things about it, anyone have experience with it?

Try Benstoegerproshop.com

Mine is being sent back to Trijicon on Monday. Dot keeps going out while shooting. I have probably 500 rounds through it.

Add me to the list with SRO problems. I have less than 1000 rounds, and it continues to go off. Shooting a match this past week and it just disappeared during a stage. Thought it might be the battery so made a change and first shot in the next stage when out again. Got home and made sure it was secure, took to the range the next day and it worked. However, I called Trijicon on Friday and they send send it back and they would send a new one. Told them I would this Monday, had a match today (Sat) and again, first stage, first shot, gone, no dot.Going back on Monday. Not real happy about it but the CS is 10x better than Leopold who quoted 4-6 weeks. Trijicon sent me a RA form and said as soon as they get the old one, a new one will be on the way. Mine was the 5 Moa.

I wish there was a way to watch these squads, (other then being there in person, lol). Very interested to see Stoeger, Vogel, against JJ. Well Coley as well. That’s a hell of a squad in limited

Thank you Sir.

Anyone know who’s in the super squads for CO/Limited in Nationals? Practice score doesn’t list it yet.

Scary what he might accomplish over the next few years when he actually reaches his peak performance. He could be the Michael Jordon/Tiger Woods in which he just dominates the sport and everyone else competes for 2nd. Certainly was the case this year, hard to see that changing. Pretty dominating.

Had CZC do the slide cuts and plate system w/ DDP but now have the SRO. Had 11lb but started get light strikes. I shoot factory ammo, typically 124g or 147. Went to the 13 lb and no issues. Personally I like how the 124/147 returns to zero, not chasing the “flat” shooting gun but that’s just me.

I would call them and ask them to turn it around in a week. That’s what I did and basically wouldn’t accept the 4-6 week answer. Especially in your situation, I would ask to speak to someone other than the CS rep who picks up the phone, get a manager who can make that decision. They turned mine pretty quick once I raised a little Hell (nicely)

I shoot some at a couple matches when I was shooing my g34. Around 500-600 rounds from what I remember, no issues at all. It was actually pretty hot, Chrono’d it at a match and it was around 955, otherwise it was fine.

Yep did all that you mentioned. Got extra springs so don’t have to wait around to order next time.

Yep, pretty much what I did. Went a little heavier on the hammer spring to 13 lb.

That’s sweet!! Beautiful gun.

As George16 stated, federal is suggested with the 8 lb HS. 11.5 generally is pretty good. Most of the ammo used (about 3000) rounds was remain ammo from Angel fire. The other 15 hundred was mainly Fiocchi 124 g and Lawman 147g. I had other issues with malfunctions with the remain ammo so ended up just using factory. So all said only 1500 or so with factory ammo which both as I understand have hard primers.

I have the reduced power trigger return spring currently. The 11.5 lb is relatively new, about 4500 rounds through it, but probably double that in dry firing. I just put the 13 lb. hammer spring in the gun, have a 12 lb coming from CGW. Not sure the 1 lb will make much difference so likely will just keep the 12 as a back up spring. I’ll probably try it to see if much difference but not sure worth messing with reliability.

Just an fyi, I have an 11.5lb hammer spring and starting to get light primer strikes from factory ammo. I’m around the 4500 round mark and this is the first I’m experience light strikes. Changed to the 13 lb so hopefully that solves the issue.

Hi All, Just started to get light primer strikes on my S2. I have about 4500 rounds through it and this a first. Happened multiple times with different ammo today. Fiocchi 124g, and Lawman Speer 147g. I have a 2075 rami firing pin spring with the extended firing pin and 11.5 lb hammer spring. Going to change out the FPS and probably would like to keep the 11.5 lb hammer spring but probably should go to the 12 or 13 lb one. Any thoughts or suggestions? Am I on the right track with this? Should I just change the FPS first or just do both? I have shot over 1000 rounds of the ammo above and I know they probably have hard primers but I like the recoil and accuracy of the ammo along with the price but if there is another option I should look at for competition let me know. I don’t reload my ammo so I go factory with it. Thanks in advance.

Another way you can work the SA in a DA/SA, you can have the hammer back in SA and engage the safety. I prefer that much more than doing the DA pull and not letting it reset.

I used to also be anal about cleaning my guns but a buddy of mine who uses this on his Atlas Chaos swears by it. Picked some up and love it. Takes no time to clean and does the job. https://www.hornady.com/reloading/case-care/lubes-and-cleaners/one-shot-cleaners

Do This! ^^^^^, it’s a great and inexpensive starting point, I might add the reduced power return spring. While the S2 is good out of the box, these little changes make a pretty big difference without going full custom trigger job. I was also shooting my glock 34 CO for competition and so glad I made the change. Sent to CZC for the plate optic system, worth every penny!

This.

I like running the accelerator. It incorporates speed, accuracy and transitions all in one drill. You can also run into position vs just standing in one spot that adds to the challenge of performing this drill. I’ll will try to mix in a tuxedo target or even a partial on occasion.

It took almost 4 weeks for them to change mine. I called and send multiple emails, but they finally got around to changing it. Unfortunately you have to stay on top and bagger them to get it done.

Still waiting on CZC to get the plates back in stock. Very frustrating, have the SRO but no mounting plate. Wonder if the plates they get in stock will not have the gaps that GregJ has in the pics in the above post.