yigal

You want to get something for free from the Czechs. ? Good luck

Dan Wesson DWX Pistol 9mm - ADELBRIDGE & CO Congratulations on the first used DWX for sale.

this.

If you buy a carrot you will have both a CM and parrot/carrot enjoy new toy.

lately found my old pro point PDP2 from 1993 that i used. still working with old battery that i replaced in 1997 or 1998

all of them

u can do this only with alum. trigger .not with original plastic trigger.

Also, I installed the AGW tool-less guide rod (with 8# recoil spring) and their high angle thumb safety and a 17# hammer spring. polished everything that rubbed and got a nice 2.3# trigger out of it. After you fitted properly thumb safety and did a good trigger job , I'm surprised that you have difficulty shortening 2 f....... screws to the appropriate length.

I liked this toy. You've convinced me. Maybe this will be my next SVI . after i will change all the mim crap parts inside it. i have all of them from best quality .

Now you are ready for World War 3

Beautiful design.

i cut comp like this and now i use this gun as limited. saw few sti cracked comps after 3k of minor ammo.

you can believe It's the smallest thing. Look at their design mistake over the years in all their mags. the asymmetric groove that the mag release fits into. If you change the mag release to the other side, the mag sits 2-3 mm lower and the gun does not go into the IPSC box and many shooters that done this suffer from mulfunctions.

i made one concave from ss. for this types of pin And also made few pins with recess inside the pin so that the punch does not slip from it.

It's like in politics. The leftists always cause problems.

Judging by the photos of the titanium coating on the barrel and the photo of the breach face, this gun did not shoot much. The rest of the terrible signs look like a rough machining and "fit" by a "gunsmith" who assemble it . i saw only once new DVC STI with same rough machining sings and bad slide to frame and barrel fitting. but it works

I will wait for your review like CH.L. posted here about the Atlas gun after shooting 100k in 40 cal (or9mm).

how is slide to frame fit. like custom 2011 or not? 4lb trigger pull weight not problem at all .

it's slide of .40 .no plastic recoil spring plug . maybe with 9 mm barrel.

Tony system scope mount have clearance only 0.4mm above the TSO slide In any case, this space is not enough in my opinion. That's why I made a slot for the slide rib a width of 11 mm and a depth of 0.7 mm

Awaiting review. Hopefully the pen won't break while writing and he won't find another pen because it was the last pen in New York. And it's impossible to go get another one because the van's water pump still doesn't work