yigal

tap and die set M14x1 can fix this.

One of the friends has stock 3 Worked from first day with Buffer. The barrel broke into 2 pieces after 200k rounds of factory 9mm ammunition. slide still O.K. other club member use it without buffer .slide cracked after 50k factory 9mm ammo mine worked with buffer ~100k .unfortunately it was stolen from my house.

stronger extractor spring will solve this .. we have 1 in ours club with same problem. returned to distributor half year ago. shooter still waiting

my old cz 75 from 1986.frame with electroless finish .used it with compensator few years. now it's my carry gun with his original barrel.

yes. no problem. It's creativity. The gun is a recycled Skoda and the plastic rod is her dashboard

I once read an article by someone I think from Norway, who had a TS 40 and he always used it with a buffer. He broke 2 or 3 barrels and rear sight but the gun held 100k. Ask here in the forum those who removed the buffer from TS whether their gun fired more than 40k and did not break.

You said it very gently

22 MS why not 40

i always like good jokes.If you don't clean the gun and don't make sure to change the buffer in time and treat the gun like a block of metal found in the yard, so really this buffer is unnecessary. This gun in first edition was supplied with a buffer .probably also designed to work with it. about other type of guns it's probably correct . sh2 without buffer it's like stroked gun.

I find it hard to believe that when you do a split of 0.06 and you have less than 2 pounds of trigger pull w. the leaf spring enough to respond and not fire an automatic.

I made some accessories to fix them. But it's hard for me to explain. Do a search on the forum and see how others did it.

did u switch mag release to other side for left hand shooting? if not your mags need tuning.

A low-level production and a bad quality control for this product makes it work quite borderline. Depends on luck what you got.

I decided not to invest too much in this work. I just throw the old grip in the trash and take a new one. .

i have 2 old mags with same problem . good weld and finish 3 years ago and it's work like new.

have u ever tried this?

because CZ Eu their trade mark is sloppy gunsmithing work. not only extractor can cause this problem. properly reamed and polished chamber will solve this problem.

Only a very super talented person can do such a thing

The older models of the 2nd generation has much stronger slides than the new ones. Probably no one is interested in producing a gun, which fires and does not break

I thought someone had already done it because I had some ideas in that direction

Is also the slide rails are longer ?

I did not do such a thing but I often had to bend this spring. And if it does not break immediately then everything is fine.

For this reason when designing such a mechanism leaves room for a flat washer, which prevents this problem. Therefore when assembling this spring you need to be skilled for the assembly to be correct without f. washer.

shorter recoil stroke and more impact. because polymer frame there is no metal to metal battering and glock hold a lot. with proper design no problem to make glock slide to hold more than 500k . as i remember that G.G. told to one of ours club member (that with 350) that in glock factory they shot with glocks17 gen 1 and 2 more than 450k.