yigal

Now you are ready for World War 3

Beautiful design.

i cut comp like this and now i use this gun as limited. saw few sti cracked comps after 3k of minor ammo.

you can believe It's the smallest thing. Look at their design mistake over the years in all their mags. the asymmetric groove that the mag release fits into. If you change the mag release to the other side, the mag sits 2-3 mm lower and the gun does not go into the IPSC box and many shooters that done this suffer from mulfunctions.

i made one concave from ss. for this types of pin And also made few pins with recess inside the pin so that the punch does not slip from it.

It's like in politics. The leftists always cause problems.

Judging by the photos of the titanium coating on the barrel and the photo of the breach face, this gun did not shoot much. The rest of the terrible signs look like a rough machining and "fit" by a "gunsmith" who assemble it . i saw only once new DVC STI with same rough machining sings and bad slide to frame and barrel fitting. but it works

I will wait for your review like CH.L. posted here about the Atlas gun after shooting 100k in 40 cal (or9mm).

how is slide to frame fit. like custom 2011 or not? 4lb trigger pull weight not problem at all .

it's slide of .40 .no plastic recoil spring plug . maybe with 9 mm barrel.

Tony system scope mount have clearance only 0.4mm above the TSO slide In any case, this space is not enough in my opinion. That's why I made a slot for the slide rib a width of 11 mm and a depth of 0.7 mm

Awaiting review. Hopefully the pen won't break while writing and he won't find another pen because it was the last pen in New York. And it's impossible to go get another one because the van's water pump still doesn't work

it was tested in 2018 with 470 gram trigger pull weight and sear 50% primary cut to check if it will shoot bursts. some company employees who tested it near me were disappointed that it did not fire automatically.

I tried to contact A. N. from Atlas according to the advice of one of the forum members. I called there few times but each time the answer from one of the employees was that he was not found and hung up. Apparently this trigger is just only for me.

yes.

There is no way. because as a businessman I am really bad. This system has been working in my 2011 since June 2018 and the change was a decrease from 630 grams to 550.

nice work. perfect gun for IPSC. u can put the ipsc box inside the gun.

Yes. I know. And I've seen how those guns with the 2lb trigger and less shot doubles and more. That's why it gave me a boost to solve the problem and make this mechanism the most effective in the world with the 550 gram trigger

As soon as I saw the leaf spring in this picture I was disappointed that they did not put an improved trigger system in this gun. Because with the trigger of less than 1.5 pounds, the problems of the original design from 120 years ago will return

If the laws of physics haven't changed, then it probably shoots like any regular 2011 gun of the same weight.

Maybe you're squeezing the trigger too hard?

So if you sell we will know why

I see someone heard your prayers.