Jump to content
Brian Enos's Forums... Maku mozo!

wrench459

Classified
 View Profile  See their activity

  • Posts

    67

  • Joined

  • Last visited

 Content Type 

Everything posted by wrench459

  1. wrench459
    My guns like .377 dia. with .355 bullets.
  2. wrench459
    I'm running a short bbl.(3.1in)so ~5.3gr of cfe-p. Also wac,pp or sp might be a good idea and/or choice.
  3. wrench459
    I've got to load those short @1.050 (.010-off land)in my gun.
  4. wrench459
    I've found that the shell OD works very well for me @ .377. With .356 bullets-.378,.357-.379.
  5. wrench459
  6. wrench459
    PCC 6.4 gr of PP 1.120 OAL CCI 500 124gr EGA JHPV2
  7. wrench459
    I used some powder-puff loads for my honey. She said give me the full power loads after she figured out the sight picture.
  8. wrench459
    Thank you Top for the info.
  9. wrench459
  10. wrench459
  11. wrench459
    I almost "bit the bullet" on 115gr V2 EGA's due to the 124 shortage. Please tell us the results of the testing.
  12. wrench459
    Finally, neck tension.
  13. wrench459
    This is only with 9x19 cases
  14. wrench459
    Odd I never crimp 9mm. Just resize Bell Close bell
  15. wrench459
    I could post my most accurate loads but I'm afraid that they won't be be the same for you.
  16. wrench459
    Shorter OAL'S less powder ..longer is of course more.
  17. wrench459
    I don't reload 115gr just for plinking. Factory loads are cheaper than I can reload for.
  18. wrench459
    New EGA brass does seem to have tight primer pockets. I switched to a hand primer tool instead of using my press for better results.
  19. wrench459
    My bad I thought that the OP was talking about these... https://rmrbullets.com/shop/bullets-for-reloading/new-rmr-9mm-124-grain-jacketed-hollow-point-made-in-house-by-rmr/?v=7516fd43adaa
  20. wrench459
    I got a bag of 500 to try out. weight 124.9-125.2 Loaded up 150 rounds with my favorite 9mm recipe have not yet put any on paper.
  21. wrench459
    Can't say that I pushed it very much but 6.4 of PP 124jhp @1.120 yields 1400fps out of my PCC.
  22. wrench459
    I've got to ask the muzzle speeds with the long bbl? Some boolits will do crazy things when they hit 1400fps. I like solid copper.
  23. wrench459
    Yeah I've also been around the block a few times. Time is getting shorter for me
  24. wrench459
  25. wrench459
    Just picked up forty bullets at .63 cents each. These will be for varmint control. I'll need to do a quick ladder of around ten rounds with a pretty known powder. Is this doable?
×
×
  • Create New...