vixty

^ I like that

yes they weight you bullets and go off the average so if your average is 149 then they use that as the bullet weight when factoring PF.

I was going to buy the Mr bullet feeder funnel but then figured I had my lee expander just laying around and I had an empty station. Figured I could spend the 35 bucks elsewhere.

Cz custom had some in stock

That thread didn't work

well thats one way i guess.

I put a red dont on a cz yesterday to test the accuracy of the 165s and it got 5in group at 30 yards and a 2in group at 15 yards. My load was 2.7 gr TG 1.150. I was also able to recover one of my bullets and it doesnt seem like the rifling in the barrel is bitting the bullet very hard. The groups were 6 shots

When buying a used cz shadow how do i know what model it is or was so i can use the correct approved production weight. There doesnt seem to be very many differences between the shadow models except some have the adjustable sights. However it seems like a lot of peple take off the adjustable sight and put on a fixed. So my quesion is; is there a way to figure out the model by the S/N. When i go to a major match how do they determine which model CZ shadow i have because they all seem to say cz shadow on the slide? If i buy a used accu shadow how do i know it was an accu shadow from the custom shop and not a later upgrade which would be an illegal mod? Thanks

I've attached two videos that show the removal and installation of the hammer spring pin with one hand. I didnt remeove the magazine guide first but i think that doesnt make much of a difference. Removal https://youtu.be/Yi1IHftppBE Install https://youtu.be/hE_d-LnG1Nc

Other side

Here you go. This is the position the pin stays.

I dont have the tool and it's very easy to do. Personally I think the tool is a waste of money, just my 2 cents

I'll take a picture for you tomorrow

So I was able to recover one of my 165s today and it seems as they are barely digging into the rifling. I used to seeing deeper rifling cuts of other guns, is this normal for a cz? I put a red dot on my gun today and was getting 4in groups at 30 yards and 2 in groups at 15.

It doesn't really walk but settles. once it settles its not going to be perfectly even on both sides but once it settles it doesn't move anymore unless you keep trying to center the pin. then it will go back to finding it's resting point again.

seems like it would be easy to loose something with those stickers on the bench. i just put a few coats of poly on my plywood, problem solved.

Try xtreme copper plated bullets. I'm able to load their 165's at 1.155 in my cz

Before getting the Dillon I wouldn't shoot a lot of rounds in practice because I didn't want to have to go stand in front of the turret press for 2 or 3 hours to replenish the ammo. Now that I have the Dillon I have to tell myself to limit how much I shoot in practice because I'm going through to many bullets to quickly.

I used to chug along on a lee turret press but I started to get tendinitis in my elbow. Now I have a 650 and get surprised every time I reload at how much ammo I make when spending an hour out in the shop. I don't have a case feeder and only one primer pickup tube but I still produce more than enough ammo in a short period of time.

I came down pretty hard on them a little over a month ago about this issue and they assured me that the form 3 was sent off back in January. When buying a suppressor I decided to go straight to the manufacture to make sure that I wouldn't encounter any middle man issues but I think it ended up biting my in the butt.

So I ordered a suppressor back on January 10th of this year and I'm still waiting for a form 3 approval. I've had two friends already get form 3's and 4's approved in this time frame through the local dealer I'm using. Is there anything I can do? Every time I ask the manufacture about the form 3 they say its pending. The 1,400 dollars I spent on this suppressor feels like a black cloud hanging out over my head. I put a good amount of money into getting a tikka 35 whelen customized to use with this can. Would I be better of just canceling the order and buying a ton of bullets? Has anyone else encountered this problem before?

I moved discussion to a new topic

It still comes out to 180. The 12 bucks covers shipping

Everywhere I've read has said the Mecgar mags are the way to go so I'm wondering why I'm having issues with them. Maybe in need to leave the mags full when I'm done shooting to break in the springs a little.

Just my mecgar 17rd mags. The factory ones don't have an issue