Nugget

Make ready pro shop has 18" double fluted Satern barrels for 290.00 in both stainless and black.

I like to round out the low mass bcg and buffer system with a good adjustable gas block and compensator. I've tried syrac gas blocks and they work very well but both syrac gas block set screws have seized up on me over time so I switched to seekins. An adjustable gas block allows you to tune your rifle to the load you are using. A good comp also helps keep your rifle flat. I really like the SJC Titan and the seekins comp. Enjoy.

Amen.

Another one for grams springs and followers.

Google uspsa load data. There are ipsc loads utilizing n320 with 180 grain. Great resource. Only one n320 plated load though. Sorry. I use 4.8 n320 with 180 grain j&k fntc 1.180 oal. 170 pf out of a 5" edge.

Happy Birthday!!!

The new whipped peanut butter is like peanut butter cake frosting. Good!

Stephen kings " the gunslinger/dark tower series" vintage good stuff.

You might also check the adjustment on your index spring on the size and decap station. I have found if it is pushing against the case at all it will cause it to hit the edge of the die when resizing causing that exact deformation.

I like the seekins so far. I have only put a few hundred rounds on it but it still adjusts. It has a brass set screw that holds the gas adjustment screw where you set it so no backing in or out. You're right about the syrac and it's tendency to death lock.

Great lead! Thank you!!

Merry Christmas and a happy prosperous new year!

Beautiful.

Does the ape take the whole bunch if he only wants one?

I love the tool less guide rod. Makes take down easy. 1000's of rounds and no problems. Well worth the money IMHO.

+1 one on the sd3g. Super clean break and lightening reset.

+1 on the copper chore boy wrapped around a bore brush. It is fast and thorough. Just be sure to get the all copper chore boy.

Really love the boner pill commercials and they're disclaimers; may cause blindness and hearing loss. Sounds like someone was making excuses for picking up that homely girl and then acting like they can't hear her say no.

I had the exact same problem you described after changing my trigger and striker spring. Figured out that when I installed the trigger spring the front loop on the trigger bar got canted when I reinstalled it in the housing and created more tension on the trigger bar. Easy quick fix reset fine after correcting.

+100 for southern guns. Great guy,great price!

I bought one also and had the same problem with 180 ltc. Correct on the gauge being the problem. What Steve said even though it takes longer gives me peace of mind knowing each round will chamber period.did try to bore mine out though. Poor gauge.

It's better to be thought a fool than open your mouth and remove all doubt. "The beatings will continue until the morale improves" "That pain you feel is weakness leaving your body"