MARKAVELI

I think I striped the threading blogs.

Always a work A' holic, never tookin a vacation, I promise to do my best and not take the little things for granted like family time!

to your brother, praying for a speedy recovery!

Hope all is well by you... Nice pic.

Congradulations to you and the Mrs.

Took a few days was geting frustrated, I backed te die to far out. I did call Dillon and told me to send it in. so I will see what happens , thanks fellas.

it did use lube, but might have picked up one that was not. Since I backed the stuck die bolt back I cant get it to screw it back down. It just turns and it won't catch by the thread's I see metal powdery like shavings coming from the top of die and I also see powder like shavings coming from a small tiny hole from the side of the die. I'll try freezing it.

I just got brians book yesterday, I couldn't put the book down. +1great book..

I just started reloading (atleast trying to get started) 22 3 on my Rl550b and had got a brass casing stuck... Here is what I did, I in stalled the shell plate like you would normally do I do beleave I didn't set the paperclip thinggy rightop for starters. I then dialed down my Dillon sizing die(kiss the shell plate then back out the die a half turn. I then backed out the copper looking bolt on too of sizer(believe it's the stuck case remover). I did that cause I thought maybe it might crush the casing. I thought I had it close to being dialed in pulled the handle down felt hard on the down stroke and when I brought the handle up it pulled out from the shell plate... And thats how I got here, I tried to unscrew the bolt ontop of sizer (stuck case remover) but it seems to not want to come apart. How do I get the case out? Thanks in advance..

Nice workbench Sarge..

Question.. I picked up a safe bolt down kit came with 2 lags and 2 what looks like wood screws. Do I need to buy 2 lag bolts maybe another kit cause I do gotta bolt all 4 corner rights?(im putting in & on concrete slab house floor.). Thanks in advance.

yup!

"Before all else, be armed"- Niccolo MaciavellI "Chuuuch" -(me)Markaveli

Welcome to the forums..

get both!

nice 45

Welcome to the forums!

Yup all the time for 5 calibers.... well except 38SPL/357MAG that i will be ordering the redding seating die for that cal. and soon 2 toolheads for 223 one for resizing and trimming the other for powdering,seating bullets,tamper crimping. good luck!

happy birthday fellas!

dont forget to wipe your feet before you come in.. welcome to the forums.

welcome to the forums!

“A man can never have too much red wine, too many books, or too much ammunition.” - Rudyard Kipling

No matter where you are in the universe, you observe everything moving away from you as the universe expands. Every observer has the illusion of being at the center.Mostly me! lol..