AzoneHits Posted March 2, 2007 Share Posted March 2, 2007 Just wondered if anyone has used this holster and what are your thoughts about the product. Link to comment Share on other sites More sharing options...
AzShooter Posted March 2, 2007 Share Posted March 2, 2007 I have a Speed Sec and love it. Fits all my Smiths and it is very reliable. I had a Rescomp previously and I find the Speed Sec to be just as fast. You do have to get use to how quick it is. Link to comment Share on other sites More sharing options...
Skywalker Posted March 5, 2007 Share Posted March 5, 2007 (edited) Fast and secure. I have one since 2003, use it with my Limited SVI, and really like it. There is no way you can loose your gun if it's locked (even when bumped on the gun butt from behind, tried it several times), although if it is unlocked a 1' high jump in the air is sufficient to have it coming out of the holster. BTW, unlocking it is a real lightning: yesterday I was shooting a lev. III in France, and one stage had an empty start with gun and mags on your belt. I foolishly didn't check my gun when the RO said "make ready", and thus didn't unlock the holster. As soon as the "Standby" command was issued I realized my mistake, but I couldn't unlock it then until the start signal (no movement allowed in this timeframe): then the beep came, and I simply unlocked the holster while gripping the gun, in a single swift motion. I don't think I've wasted anithing more than 0.1s in doing that. The only (personal) regret is that you don't get any "reassuring" clicking sound upon operating the lock/unlock lever. But I can live with it. Edited March 5, 2007 by Skywalker Link to comment Share on other sites More sharing options...
Jody Waring Posted March 5, 2007 Share Posted March 5, 2007 Luca, what would be the more popular holsters in Italy? I have been quite curious of the Speedsec, and two friends of mine use them, one of which with CZ and they both seem to love them. As you mentioned unlocking on the draw, that would give you the most piece of mind of any holster seeing as you can leave it locked right up until it comes out on the draw. I had a link once where George F. did a demo with it. Sure looks fast. Link to comment Share on other sites More sharing options...
Skywalker Posted March 5, 2007 Share Posted March 5, 2007 Jody, in Italy the most popular holsters are the "Ultimate Ghost" by Sandro Amadini: they're cheaper than other holsters on the market. I have seen locally a steady decline in Safariland holsters, being them replaced by various models of Ghosts. Got to see some SpeedSec5, Guga Ribas, Limcats and CR-Speed ones as well on the ranges, but mostly Ghosts. Unlocking the gun while drawing: the lock/unlock lever, althoug not featuring a really ergonomic design, is strategically positioned; you can unlock the gun while actually forming your grip: when your strong hand middle finger curls following the grip contour, it will also rotate the lever to the unlocked position. You will not be as fast as with the gun unlocked: when the gun is free, you start lifting it while gripping it; on the contrary, with the lock engaged, you have to completely form your grip (and rotate the lever) before being able to lift the gun. This slows you down, yes, but no more than a tenth of a second. Link to comment Share on other sites More sharing options...
SLC Posted March 5, 2007 Share Posted March 5, 2007 you should know what you doing when you using the CW5 holster , the KISS principle applies only conditionally , as far as I can say after 3 years using the holster. Sven Link to comment Share on other sites More sharing options...
SLC Posted March 5, 2007 Share Posted March 5, 2007 video -> go to the shop -> Holster -> CW5 Link to comment Share on other sites More sharing options...
cpty1 Posted March 5, 2007 Share Posted March 5, 2007 After trying all the top holsters on the market, I settled on the Speed Sec (Xtreme) about 3 years ago. I really like the holster and use it exclusively. I sell more of them than any other holster as well. I think the holster is a great bargain for the price compared to the other choices out there. I actually have a couple of the hard to find revolver models in stock now also. Here's a link to a pic: Speed Sec (Xtreme) holster pic Link to comment Share on other sites More sharing options...
Zerwas Posted March 5, 2007 Share Posted March 5, 2007 (edited) Are the available in the the US? If so, where? NEVERMIND,,,,cpty 1 posted with that info just before I asked,,,, Thanks. Edited March 5, 2007 by TRP-Professional Link to comment Share on other sites More sharing options...
Mo Hepworth Posted March 12, 2007 Share Posted March 12, 2007 (edited) I am still using mine Jody. I switch back and forth between that and a DOH bladetech for HK USP for production. A seated draw is better with the Speedsec for sure; you just lift the gun instead of drawing out from a holster. I liked it so much that I purchased one from Freedom Ventures for my STI edge as well. If you scoop more than grab, using the lever from the locked position is a breeze. if you grab than you just make sure it is unlocked for the AUR command. Edited March 12, 2007 by Mo Hepworth Link to comment Share on other sites More sharing options...
AzShooter Posted March 12, 2007 Share Posted March 12, 2007 Here is where I got mine. Great service with everything I get there. http://shootersconnection.com/store/produc...f518e04ea853e85 Link to comment Share on other sites More sharing options...
Paradox Posted March 15, 2007 Share Posted March 15, 2007 In case you haven't made a decision yet... Here is another satisfied owner of the SS5 Holster. I just recieved a SpeedSec holster this week from Chuck @ Shooter's Connection. I used a Safariland 012 for the previous 3 years, and grew to dislike several things about it. So far, I have no complaints about this holster - however I haven't used a Ghost Holster (that would have been my next choice if I hadn't run across this one). Most of my friends have gone away from the 012 to either Ghosts, CR Speeds, or these. Link to comment Share on other sites More sharing options...
AzoneHits Posted March 15, 2007 Author Share Posted March 15, 2007 Thanks guys. Bought one from shooters connection on sale for $89. Not bad at his price. Link to comment Share on other sites More sharing options...
swattdoc Posted April 6, 2007 Share Posted April 6, 2007 Has anyone bought a left hand model and used it on the right side to make the locking lever on the outside? This was recommended to me. Tom Link to comment Share on other sites More sharing options...
Glockster35 Posted June 7, 2007 Share Posted June 7, 2007 What weapons will these fit? All I see is revolver versions! Link to comment Share on other sites More sharing options...
combat tupperware Posted August 12, 2008 Share Posted August 12, 2008 [note: mergerd treads] Has anyone used one of these. I am curious as to you opinion. I found it on the CED website and for $99 was wondering if it was a good 'race holster'. Thanks, combat tupperware Link to comment Share on other sites More sharing options...
dsb45acp Posted August 15, 2008 Share Posted August 15, 2008 I used one for a while with a Limited Para. They're a good, fast holster but the pistol rocked back and forth in the holster. I think it was because the trigger gaurd wasn't squared. I now use a Ghost holster and couldn't be happier. It's more adjustable, secure and can be used in locked or unlocked mode. IMO, if you want to use a bikini type race holster, just spend a little extra and get the Ghost. Link to comment Share on other sites More sharing options...
vous Posted September 19, 2008 Share Posted September 19, 2008 I used one for a while with a Limited Para. They're a good, fast holster but the pistol rocked back and forth in the holster. I think it was because the trigger gaurd wasn't squared. I now use a Ghost holster and couldn't be happier. It's more adjustable, secure and can be used in locked or unlocked mode. IMO, if you want to use a bikini type race holster, just spend a little extra and get the Ghost. Were you using the S_I model of teh Speedsec? You need to get the Speedsec holster specifically for the rounded guard like a Para/1911. I used to use a Ghost but had the problem with it that you had with the Speedsec. Got the proper model Speedsec for the Para and it doesn't move at all and is quick and easy to use. Link to comment Share on other sites More sharing options...
chuckbradley Posted September 19, 2008 Share Posted September 19, 2008 WE just got some of the new Speedsecs in and found that most models now have a positive lock that clicks into place and spring unloacks. I didnt even realize it until a customer pointed it out to me. Pretty slick. Wasnt on the revolver model but was on the STi model. and yes the STi model will not work for a steel frame without being sloppy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now