MikeNS Posted March 7 Share Posted March 7 Why is this not more of a thing? Seems the TS2 would be a perfect platform to play in LO. Is there anything that I’m missing that would indicate otherwise? I see more S2’s in LO than I see TS2. Link to comment Share on other sites More sharing options...
Rnlinebacker Posted March 7 Share Posted March 7 S2 comes with optics ready cut. TS2 doesn't have that option from factory. Link to comment Share on other sites More sharing options...
asierra350 Posted March 8 Share Posted March 8 I had Stonebridge cut my gen 1 TSO for an SRO, competes very well in limited optics, should be able to do the same thing to a TS2 Link to comment Share on other sites More sharing options...
akarhi Posted March 9 Share Posted March 9 Stonebridge is my favorite company. Vincent always there to help me with my cz issues and all my optic cuts Link to comment Share on other sites More sharing options...
Posvar Posted March 9 Share Posted March 9 My buddy came over yesterday and I got to see and hold his TS2. First time seeing the new version. Pretty fantastic! He is getting Scott to cut it for LO. It will be a beast. Fit and finish was great the checkering was very good. I liked it and am sure it will be a very good LO host. Link to comment Share on other sites More sharing options...
Warrior75 Posted March 10 Share Posted March 10 I had Stonebridge Gun Works cut the slide for a 507 comp on my TS2. I love the way it shoots. The only trouble I have had is having to tune the mags. Link to comment Share on other sites More sharing options...
Motorcop Posted March 12 Share Posted March 12 Being a relatively new CZ owner with only 3 of them right now, I would also think the TS2 would make a great platform if it was offered in an Optic Ready version. I have an Optic Ready Shadow 2 and Shadow 2 Compact and both have SRO's on them. They work just fine for me. I also purchased an older TSO that is a fantastic pistol, but of course is not an Optic Ready version which seems quite odd. For now I just installed an EGW plate in place of the rear sight and it works great, but it would be much nicer with a true optic cut slide. CZ is kind of missing the boat by not having a TS2 Optic Ready model. I know I would buy one and make it my 4th CZ. Perhaps they have an Optic Ready TS2 in the wings waiting to surprise us. Rick H. Link to comment Share on other sites More sharing options...
zzt Posted March 12 Share Posted March 12 I put an EGW dovetail mount on my TS and an SRO. Works perfectly well. Link to comment Share on other sites More sharing options...
Warrior75 Posted March 13 Share Posted March 13 18 hours ago, Motorcop said: Being a relatively new CZ owner with only 3 of them right now, I would also think the TS2 would make a great platform if it was offered in an Optic Ready version. I have an Optic Ready Shadow 2 and Shadow 2 Compact and both have SRO's on them. They work just fine for me. I also purchased an older TSO that is a fantastic pistol, but of course is not an Optic Ready version which seems quite odd. For now I just installed an EGW plate in place of the rear sight and it works great, but it would be much nicer with a true optic cut slide. CZ is kind of missing the boat by not having a TS2 Optic Ready model. I know I would buy one and make it my 4th CZ. Perhaps they have an Optic Ready TS2 in the wings waiting to surprise us. Rick H. Link to comment Share on other sites More sharing options...
Warrior75 Posted March 13 Share Posted March 13 Alot of people prefer to have a direct mount. Instead of have to use a plate. Another potential failure point with a plate on an optics ready gun. I'm not saying the all fail. I don't think CZ will ever offer the TS line in optics ready models. Not enough interest at this time. Link to comment Share on other sites More sharing options...
pcar157 Posted March 13 Share Posted March 13 Not to hijack this thread but I read that CZ-UB is selling Shadow 2 Orange optic ready. CZ-USA says there are no palns to bring it to the states. Foolish in my view. Link to comment Share on other sites More sharing options...
akarhi Posted March 13 Share Posted March 13 55 minutes ago, Warrior75 said: Alot of people prefer to have a direct mount. Instead of have to use a plate. Another potential failure point with a plate on an optics ready gun. I'm not saying the all fail. I don't think CZ will ever offer the TS line in optics ready models. Not enough interest at this time. I heard mix of 50/50 of preference. I havent experienced any issues but I have seen both Direct Mounts and Plates sear off during course of fire or while theyre at the safe table trying to mount it etc Link to comment Share on other sites More sharing options...
Seakphotog Posted March 16 Share Posted March 16 On 3/13/2024 at 5:57 AM, pcar157 said: Not to hijack this thread but I read that CZ-UB is selling Shadow 2 Orange optic ready. CZ-USA says there are no palns to bring it to the states. Foolish in my view. Incredibly foolish. Baffling, really. Link to comment Share on other sites More sharing options...
dogtired Posted May 12 Share Posted May 12 I thought it was a good idea… Link to comment Share on other sites More sharing options...
pcar157 Posted May 12 Share Posted May 12 (edited) On 5/12/2024 at 1:15 AM, dogtired said: I thought it was a good idea… @dogtiredwhoever did the optic milling did they also fill in the holes for the thumb rest? What was the refinish? Edited May 13 by pcar157 Link to comment Share on other sites More sharing options...
shred Posted May 12 Share Posted May 12 I tried an EGW dovetail mount, but it ran out of elevation on a TS2. Maybe with a dot with more travel it would work. They're not super-common in 9mm, although they are around. Chase down the magic magazines to hold 24, get a good trigger and fit a dot. Shot fine and if I wasn't neck-deep in 2011 parts, I'd seriously think about running one. Link to comment Share on other sites More sharing options...
dogtired Posted May 12 Share Posted May 12 I had a TSO before Limited Optics was a thing. It really didn’t do anything for me in the games. I traded up to a Czechmate. When LO became a thing I found a good deal on a TS2 and had it milled. I had the mags already. Link to comment Share on other sites More sharing options...
asierra350 Posted May 13 Share Posted May 13 I ran the Bul Radical in a match today and found myself missing the TSO, the CZ guns aren’t giving anything away against the 2011 in my experience Link to comment Share on other sites More sharing options...
zzt Posted May 13 Share Posted May 13 20 hours ago, shred said: I tried an EGW dovetail mount, but it ran out of elevation on a TS2. Maybe with a dot with more travel it would work. Buy a 1 degree shim on Amazon. Cures the problem. Available for different dots. Link to comment Share on other sites More sharing options...
shred Posted May 13 Share Posted May 13 That's a hack to fix a problem that should be addressed in the scope mount. Tilting barrel lockups all tilt the barrel downwards when in battery by up to a degree so anyone making cuts or mounts that don't have an angle in are cheesing out when they say "just put a shim on it if it doesn't zero" Link to comment Share on other sites More sharing options...
ringram Posted July 9 Share Posted July 9 Agreed. Usually its built into the mount. CZC do plate cuts for the Tac Sport. I had mine done. Link to comment Share on other sites More sharing options...
Michaelsabre Posted July 15 Share Posted July 15 My CZ TS1 set up for LO. Link to comment Share on other sites More sharing options...
rifleman777 Posted August 31 Share Posted August 31 On 7/15/2024 at 3:50 PM, Michaelsabre said: My CZ TS1 set up for LO. Is that the wider Shadow 2 safety that you put on? If so, how do you like it? I’ve been trying to get one ordered for over a year from both CZC and Cajun……never in stock. Link to comment Share on other sites More sharing options...
Michaelsabre Posted September 4 Share Posted September 4 (edited) Mine came with the pistol. I don’t think you miss anything. It’s not faster than my cz shadow regular safety. It does looking better Edited September 4 by Michaelsabre Link to comment Share on other sites More sharing options...
Michaelsabre Posted September 4 Share Posted September 4 On 3/7/2024 at 7:37 AM, MikeNS said: Why is this not more of a thing? Seems the TS2 would be a perfect platform to play in LO. Is there anything that I’m missing that would indicate otherwise? I see more S2’s in LO than I see TS2. After shooting TS in LO for 6 month, I can tell you S2 parts are much easier to get and the price is more reasonable. And so much more S2 YouTube video if you want to DIY. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now