ES13Raven Posted November 12, 2021 Share Posted November 12, 2021 I just picked up an SP-01 Shadow Custom from CZC and had them install the custom RDS plate for the SRO. The screws that come with the SRO are too long. Anyone know the correct size screws to get, and where to get them? I'd prefer black screws with an Allen or Torx screw head. Thanks! Link to comment Share on other sites More sharing options...
SGT_Schultz Posted November 13, 2021 Share Posted November 13, 2021 Take measurements and then order what you need from McMaster Carr. Link to comment Share on other sites More sharing options...
S&W686 Posted November 13, 2021 Share Posted November 13, 2021 I had the same issue and ended up cutting down the longer screws with a Dremel to fit. I believe I ordered shorter screws that would work better with the SRO. I will check to see if I still have them. Link to comment Share on other sites More sharing options...
Artemas Posted November 13, 2021 Share Posted November 13, 2021 check CZC website for Rmr/Sro specific screws? Primary machine carries them, not sure how they will work on with the CZC plate though. and as S&W686 noted you can also file down what you have. Link to comment Share on other sites More sharing options...
HOGRIDER Posted November 14, 2021 Share Posted November 14, 2021 (edited) On 11/12/2021 at 1:00 PM, ES13Raven said: I just picked up an SP-01 Shadow Custom from CZC and had them install the custom RDS plate for the SRO. The screws that come with the SRO are too long. Anyone know the correct size screws to get, and where to get them? I'd prefer black screws with an Allen or Torx screw head. Thanks! This might help with screw size............. Edited November 14, 2021 by HOGRIDER sp Link to comment Share on other sites More sharing options...
D_B_X Posted November 14, 2021 Share Posted November 14, 2021 I ended up using the RMR screws on the SRO. It works fine with the CZC optic plate. Link to comment Share on other sites More sharing options...
Chompion Posted November 19, 2021 Share Posted November 19, 2021 On 11/12/2021 at 12:00 PM, ES13Raven said: I just picked up an SP-01 Shadow Custom from CZC and had them install the custom RDS plate for the SRO. The screws that come with the SRO are too long. Anyone know the correct size screws to get, and where to get them? I'd prefer black screws with an Allen or Torx screw head. Thanks! Ive used these screws before https://www.battlewerx.com/trijicon-rmr-mounting-screws-for-glock-mos-slides-6-32-x-385-torx-pair/ Trimming the screws that came with your sro is probably your best bet though since you can get them exactly where they need to be. I believe CZC recommends this route Link to comment Share on other sites More sharing options...
ES13Raven Posted November 21, 2021 Author Share Posted November 21, 2021 On 11/18/2021 at 6:21 PM, Chompion said: Ive used these screws before https://www.battlewerx.com/trijicon-rmr-mounting-screws-for-glock-mos-slides-6-32-x-385-torx-pair/ Thanks, I had already found the BattleWerks website and ordered their screws. I also went to Lowe's to see if they had any screws that would work. Here is what I found using a micrometer, hopefully this helps someone else in the future: .495" = SRO stock screws (too long) .369" = Lowe's Machine Screws #6-32 x 3/8" (too short) .381" = BattleWerks Trijicon RMR for Glock MOS 6-32 x .385" (too short) .424" = JagerWerks Trijicon RMR/SRO - #6-32 x 7/16" IP15 (just right) Link to comment Share on other sites More sharing options...
Malarky112 Posted November 24, 2021 Share Posted November 24, 2021 I ran into the same issue and I believe I found that the ones made for a Glock plate fit just right, but don’t remember now since I’ve moved on to an S2. Seems silly that CZC doesn’t offer them for how popular the SRO is. Link to comment Share on other sites More sharing options...
SGT_Schultz Posted November 24, 2021 Share Posted November 24, 2021 On 11/21/2021 at 2:54 AM, ES13Raven said: Thanks, I had already found the BattleWerks website and ordered their screws. I also went to Lowe's to see if they had any screws that would work. Here is what I found using a micrometer, hopefully this helps someone else in the future: .495" = SRO stock screws (too long) .369" = Lowe's Machine Screws #6-32 x 3/8" (too short) .381" = BattleWerks Trijicon RMR for Glock MOS 6-32 x .385" (too short) .424" = JagerWerks Trijicon RMR/SRO - #6-32 x 7/16" IP15 (just right) That's nowhere near enough thread engagement with the slide. Good luck. Link to comment Share on other sites More sharing options...
ES13Raven Posted November 24, 2021 Author Share Posted November 24, 2021 (edited) 4 hours ago, SGT_Schultz said: That's nowhere near enough thread engagement with the slide. Good luck. Good luck? OK Mister condescending... Please tell us how "that's nowhere near enough thread engagement with the slide" when the SRO thread doesn't screw into the slide, it screws into the plate. The RDS plate has separate screws for the slide. The SRO screws I am using are just touching the slide, having enough thread to go all the way through the plate. Edited November 24, 2021 by ES13Raven Link to comment Share on other sites More sharing options...
Boomstick303 Posted September 15, 2022 Share Posted September 15, 2022 On 11/21/2021 at 12:54 AM, ES13Raven said: .424" = JagerWerks Trijicon RMR/SRO - #6-32 x 7/16" IP15 (just right) Thank you for doing the leg work on this. Much appreciated. Link to comment Share on other sites More sharing options...
ES13Raven Posted September 18, 2022 Author Share Posted September 18, 2022 On 9/15/2022 at 6:32 AM, Boomstick303 said: Thank you for doing the leg work on this. Much appreciated. Glad it helped someone. Link to comment Share on other sites More sharing options...
Jstacks Posted May 19, 2023 Share Posted May 19, 2023 On 11/21/2021 at 1:54 AM, ES13Raven said: Thanks, I had already found the BattleWerks website and ordered their screws. I also went to Lowe's to see if they had any screws that would work. Here is what I found using a micrometer, hopefully this helps someone else in the future: .495" = SRO stock screws (too long) .369" = Lowe's Machine Screws #6-32 x 3/8" (too short) .381" = BattleWerks Trijicon RMR for Glock MOS 6-32 x .385" (too short) .424" = JagerWerks Trijicon RMR/SRO - #6-32 x 7/16" IP15 (just right) Did the glock mos screws from BattleWerks work when mounting your SRO to the plate or did you have to get longer screws Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now