slavex Posted July 12, 2020 Share Posted July 12, 2020 Well, technically 3135 RPH with the Index at 2. Got her dialed in nicely now, CCI primers, cases are rollsized and processed beforehand. Running 3.22gr of Tightgroup, CCI SPP, mixed range brass, 147gr CamPro bullet. Link to comment Share on other sites More sharing options...
Thetimb Posted July 12, 2020 Share Posted July 12, 2020 4 hours ago, slavex said: Well, technically 3135 RPH with the Index at 2. Got her dialed in nicely now, CCI primers, cases are rollsized and processed beforehand. Running 3.22gr of Tightgroup, CCI SPP, mixed range brass, 147gr CamPro bullet. that thing is flying! Have you had any issues with the digital powder drop? Link to comment Share on other sites More sharing options...
slavex Posted July 12, 2020 Author Share Posted July 12, 2020 the first one I got was an issue, due to it having the larger cavity for rifle loads. I got it swapped for the newer pistol one and have loved it since. Link to comment Share on other sites More sharing options...
MikeyScuba Posted July 12, 2020 Share Posted July 12, 2020 Where did you get the light kit? Link to comment Share on other sites More sharing options...
rowdyb Posted July 12, 2020 Share Posted July 12, 2020 Whoa! Link to comment Share on other sites More sharing options...
hmg1 Posted July 12, 2020 Share Posted July 12, 2020 How can I go pull the handle on my 1050 after seeing that.... Link to comment Share on other sites More sharing options...
tmz Posted July 12, 2020 Share Posted July 12, 2020 3 hours ago, MikeyScuba said: Where did you get the light kit? I’m pretty sure here. https://reloadinginnovations.com/collections/featured-reloading-products/products/starlight-press-lighting-system-for-mark-7-evolution-revolution Link to comment Share on other sites More sharing options...
tmz Posted July 12, 2020 Share Posted July 12, 2020 One bad ass set up!!! Link to comment Share on other sites More sharing options...
BiknSwans Posted July 12, 2020 Share Posted July 12, 2020 1 hour ago, tmz said: I’m pretty sure here. https://reloadinginnovations.com/collections/featured-reloading-products/products/starlight-press-lighting-system-for-mark-7-evolution-revolution You burned me. I just ordered the light kit. I hadn't seen one for the Mark 7 until now. Thanks. Link to comment Share on other sites More sharing options...
MikeyScuba Posted July 12, 2020 Share Posted July 12, 2020 1 hour ago, tmz said: I’m pretty sure here. https://reloadinginnovations.com/collections/featured-reloading-products/products/starlight-press-lighting-system-for-mark-7-evolution-revolution I tried there, however unless you live in the US or South Africa they won’t ship it to you. My US based P.O. Box is only 90 minutes away by car but with the border closed...... I’m just in the process of setting up the dies on my machine, I tried 2000 rph out of curiosity and was like whoooa Link to comment Share on other sites More sharing options...
Chills1994 Posted July 12, 2020 Share Posted July 12, 2020 15 hours ago, slavex said: Well, technically 3135 RPH with the Index at 2. Got her dialed in nicely now, CCI primers, cases are rollsized and processed beforehand. Running 3.22gr of Tightgroup, CCI SPP, mixed range brass, 147gr CamPro bullet. Have you tried bottle necked rifle cases say like .223 or .308? Since the rifle cases are more top heavy and then add a bullet sitting on a case mouth with very little flare, one would think the bullets would like to fall off . Link to comment Share on other sites More sharing options...
Cuz Posted July 13, 2020 Share Posted July 13, 2020 16 hours ago, slavex said: Well, technically 3135 RPH with the Index at 2. Got her dialed in nicely now, CCI primers, cases are rollsized and processed beforehand. Running 3.22gr of Tightgroup, CCI SPP, mixed range brass, 147gr CamPro bullet. I'd sure like to stop by your place with a bunch of my components for about 4 hours... Link to comment Share on other sites More sharing options...
slavex Posted July 13, 2020 Author Share Posted July 13, 2020 @Cruz I'm actually working on doing just that for some people, just gotta figure out what to chsrge Link to comment Share on other sites More sharing options...
slavex Posted July 13, 2020 Author Share Posted July 13, 2020 @Chills1994 no, haven't run rifle cases, I was going to set it up for 223 but our recent gun ban killed that plan. I suspect I'd have to run it slower for loading. Link to comment Share on other sites More sharing options...
Chills1994 Posted July 13, 2020 Share Posted July 13, 2020 9 hours ago, slavex said: @Chills1994 no, haven't run rifle cases, I was going to set it up for 223 but our recent gun ban killed that plan. I suspect I'd have to run it slower for loading. Sorry to hear about the ban. Thanks for the reply! Link to comment Share on other sites More sharing options...
Thetimb Posted July 14, 2020 Share Posted July 14, 2020 On 7/12/2020 at 6:41 PM, Chills1994 said: Have you tried bottle necked rifle cases say like .223 or .308? Since the rifle cases are more top heavy and then add a bullet sitting on a case mouth with very little flare, one would think the bullets would like to fall off . I have that issue with 9mm powder coated bullets. It takes some tweaking to get the flare right or else they topple off at high speeds. Link to comment Share on other sites More sharing options...
slavex Posted July 15, 2020 Author Share Posted July 15, 2020 I have my index set at 2 to help stop bullets getting tossed off, if I run it at a zero setting they often fly off Link to comment Share on other sites More sharing options...
Stickman301 Posted July 17, 2020 Share Posted July 17, 2020 Which dies are you running? Link to comment Share on other sites More sharing options...
slavex Posted July 17, 2020 Author Share Posted July 17, 2020 a mix of them. Might Armory Decap and Sizer, Redding competition Seating die and GBO Reload crimp die. Link to comment Share on other sites More sharing options...
Thetimb Posted July 18, 2020 Share Posted July 18, 2020 1 hour ago, slavex said: a mix of them. Might Armory Decap and Sizer, Redding competition Seating die and GBO Reload crimp die. I got the FW arms decapping die in. I am going to try this thing out without prepping the brass and see how good/bad it is. I typically do a prep cycle and then load cycle on 9mm just because everything runs way smoother. I am hoping I can get it down to really smooth 1 pass loading vs 2. Link to comment Share on other sites More sharing options...
slavex Posted July 22, 2020 Author Share Posted July 22, 2020 I do two pass as well @Thetimb but I have my loading toolhead setup with a decap and sizing die just in case a piece of brass sneaks into a bucket (usually because of a friend being helpful and picking up a piece of brass off the floor and throwing it into the wrong bucket). I'll never go back to single pass again. Link to comment Share on other sites More sharing options...
jcwallace84 Posted July 24, 2020 Share Posted July 24, 2020 I just ordered the autodrive for my manual evo. So would you guys still do two pass even if rollsizing prior? The reason I asked is that I bought a rollsizer recently as well. Haven't had a chance to load with rollsized brass. Link to comment Share on other sites More sharing options...
slavex Posted July 24, 2020 Author Share Posted July 24, 2020 I wash, dry, rollsize then process, then finally load at a later date. I will never go back to one pass if I can help it Link to comment Share on other sites More sharing options...
Atlas33 Posted April 18 Share Posted April 18 On 7/17/2020 at 12:35 PM, Stickman301 said: Which dies are you running? sent you a Pm, Stickman Link to comment Share on other sites More sharing options...
MikeyScuba Posted April 18 Share Posted April 18 Sorta zombie thread I guess? It's been a few years now and I run my supercomp at 1730 rpm (actual) and 9mm revo at 2506. My paddle fell off the primer disc and am too lazy to glue it back so I have a pick and watch the primers and pick off the sideways ones. It was those that would jam at the paddle anyway. My primer orientation sensor is still hit an miss and IMO needs a redesign. Has Mark7 issued any new upgrades for the revo/evo pro? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now