Zuul Posted December 15, 2019 Share Posted December 15, 2019 On 12/13/2019 at 11:25 PM, eerw said: yes Excited to hear as I own both! Don't want to derail the thread so maybe the mods can split this to a another one but need to know more. Is this done straight or with some plate as the top of the slide is thinner than some other pistols? Is there space left for irons? Perhaps pictures? Link to comment Share on other sites More sharing options...
uhmeebuh Posted December 18, 2019 Share Posted December 18, 2019 The safeties came out easy and next is the fitting of the new extended safety - I can see the profile I need to match but wanted to see if there was any advice/link/video I could check out? Thanks! Link to comment Share on other sites More sharing options...
eerw Posted December 18, 2019 Share Posted December 18, 2019 14 minutes ago, uhmeebuh said: The safeties came out easy and next is the fitting of the new extended safety - I can see the profile I need to match but wanted to see if there was any advice/link/video I could check out? Thanks! guys just did video for fitting safeties. let me see if I can find it. Link to comment Share on other sites More sharing options...
uhmeebuh Posted December 18, 2019 Share Posted December 18, 2019 13 minutes ago, eerw said: guys just did video for fitting safeties. let me see if I can find it. Thank you Stuart! Link to comment Share on other sites More sharing options...
eerw Posted December 22, 2019 Share Posted December 22, 2019 A01 safeties Link to comment Share on other sites More sharing options...
lfine Posted December 23, 2019 Share Posted December 23, 2019 What’s the story on changing mag releases to the S2? Thanks Link to comment Share on other sites More sharing options...
Hooked Posted December 23, 2019 Share Posted December 23, 2019 3 hours ago, lfine said: What’s the story on changing mag releases to the S2? Thanks S2 mag release requires modifications to work in the A01-LD. The profile of the "shelf" that engages the notch in the magazine is different. You will also need to cut the end off of one leg of the magazine spring. CZC just posted a video on their FB page showing how to remove the standard A01-LD mag release and install their new extended one that is specifically made for the A01-LD. That mag release is a drop in part. Link to comment Share on other sites More sharing options...
lfine Posted December 23, 2019 Share Posted December 23, 2019 Stu (et al) Can we order the 10950 yet? It doesn't seem to show up on the webpage when I tried. Hopefully, its just me. Thanks Link to comment Share on other sites More sharing options...
eerw Posted December 23, 2019 Share Posted December 23, 2019 Should be soon. What we have are being installed in builds. Link to comment Share on other sites More sharing options...
lfine Posted December 23, 2019 Share Posted December 23, 2019 Great. Sign me up! Sorry I won’t have it under the tree but, don’t forget, an A01 makes a great stocking stuffer, too! Link to comment Share on other sites More sharing options...
eerw Posted December 28, 2019 Share Posted December 28, 2019 (edited) A01 mag releases are in stock. https://czcustom.com/czc-a01-pistols/czc-a01-parts/a01-small-parts/a01-magazine-release-with-black-extended-button.html Edited December 28, 2019 by eerw Link to comment Share on other sites More sharing options...
jripper Posted January 3, 2020 Author Share Posted January 3, 2020 On 12/27/2019 at 8:10 PM, eerw said: A01 mag releases are in stock. https://czcustom.com/czc-a01-pistols/czc-a01-parts/a01-small-parts/a01-magazine-release-with-black-extended-button.html Just ordered my extended safety and mag release. Any word on updated production numbers? Link to comment Share on other sites More sharing options...
eerw Posted January 3, 2020 Share Posted January 3, 2020 getting higher. just shipped more guns out. Link to comment Share on other sites More sharing options...
lfine Posted January 3, 2020 Share Posted January 3, 2020 (edited) Keep those machines turning! https://giphy.com/gifs/14iqpRytbWR2Sc/html5 Edited January 4, 2020 by lfine Link to comment Share on other sites More sharing options...
JBlade Posted February 16, 2020 Share Posted February 16, 2020 Has anyone thought about drilling and tapping the current factory A01-LD/SD mag realease to except a magazine extension? This seems "to me" as a very viable option. In drilling, tapping the existing realease "it could be done even with the magazine release still installed in the pistol". The pistol would still retain the use or the P09 magazines with no modifications to accept 75 mags. Sound like a viable option? If not please elaborate as to why. "Not to argue my point, more so to understand why this would not work". I just picked mine up yesterday and have yet to even shoot it. Link to comment Share on other sites More sharing options...
JBlade Posted February 16, 2020 Share Posted February 16, 2020 Hi, New to the CZC A01-LD, just acquired it yesterday. I have yet to even fire it. "So thank you for the review, I will be comparing my personal experience to your review". As far as handling the A01, I fell in love. I have a rather unique LGS / range / training center here in Charlotte that happens to carry some fantastic quality high end/more specific weapons as compared to other shops in this area. I went in specifically looking for a new CZ. They happen to carry a significant variety. Along with a host of Dan Wesson, Wilson Combat, Tarran Tactical, Carolina Customs and many , many more. "It is a great place to spend an afternoon, lol". I was able to choose handle most of the full sized CZ's that are available for sale today, including the fantastic CZC A01-LD which absolutely won me over. Big questions now, because I did not do my homework and look for available CZC or aftermarket support for customization. I have been on the internet for hours now with no definitive answers. I would like magwell, grips, magazine extension and fully adjustable rear sight for now "at least wind adjustable". I am not finding anything available. I know it uses P09 magazines so I can pick up a few more then, grab some color anodized extension base plate sand power springs for P09 magazines. What CZ pistol models do I need to research where the parts above would also be compatible with the CZC A01-LD ? Thank you to anyone who knows and replied ! Link to comment Share on other sites More sharing options...
eerw Posted February 16, 2020 Share Posted February 16, 2020 Email CZC at info@czcustom.com we offer all that you mentioned. magwell, grips, pads, sights. Link to comment Share on other sites More sharing options...
eerw Posted March 3, 2020 Share Posted March 3, 2020 Well now. This just makes things fun. Appendix D4 Appendix D7 Link to comment Share on other sites More sharing options...
hlpressley Posted March 3, 2020 Share Posted March 3, 2020 So the A01-LD will be the new hotness in CO? Link to comment Share on other sites More sharing options...
eerw Posted March 3, 2020 Share Posted March 3, 2020 38 minutes ago, hlpressley said: So the A01-LD will be the new hotness in CO? Who knows? But at least can play now Link to comment Share on other sites More sharing options...
jpeters11 Posted March 3, 2020 Share Posted March 3, 2020 Better be the hotness, just ordered an a01-ld and plan on having it cut for a sro. Ive been wanting one for awhile, but was going to wait for the lighter standard dustcover, optic ready model they showed at shot show this year. Link to comment Share on other sites More sharing options...
lroy Posted March 3, 2020 Share Posted March 3, 2020 (edited) This takes brass grip panels to add another 4oz bringing you to 55 then the sro is 1.5oz, plus a mag. Could hit 59 pretty easily. Edited March 5, 2020 by lroy Link to comment Share on other sites More sharing options...
WildPete Posted March 6, 2020 Share Posted March 6, 2020 On 3/2/2020 at 7:43 PM, eerw said: Well now. This just makes things fun. Appendix D4 Appendix D7 I went out and purchased a A0-1LD after hearing about the rule change. Can't wait to send mine into CZ Customs to get it milled for a optic. I like the rule about the 500 produce guns, maybe we'll see some Laugo Arms Alien pistols running around. Link to comment Share on other sites More sharing options...
eerw Posted March 11, 2020 Share Posted March 11, 2020 Link to comment Share on other sites More sharing options...
Jtufo13 Posted April 21, 2020 Share Posted April 21, 2020 What is the part number for the mags. It is just standard 19rd p-09 mags I can’t find mags anywhere what will work without have yo modify the gun. I need more than 2 mags. Any help is appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now