aandabooks Posted March 10, 2019 Share Posted March 10, 2019 Anyone running this pistol in CO yet? I already have one P10F without the optic cut and was thinking about adding another for the CO side. Put an optic on it and occasionally shoot CO. Just curious if anyone else has done this and what they thought of the setup. Link to comment Share on other sites More sharing options...
bimmer1980 Posted March 10, 2019 Share Posted March 10, 2019 Quote Still not available over here, but i asked the same question. Would love to hear some feedback. Link to comment Share on other sites More sharing options...
Norther Posted March 11, 2019 Share Posted March 11, 2019 Local shop has 2 P10F OR in stock. $549. Really tempted. Link to comment Share on other sites More sharing options...
eerw Posted March 11, 2019 Share Posted March 11, 2019 set up for CO using CZC optic plate, extended mag catch and 140mm pad. Havent done any trigger work yet. Have only done some sight in and in and practice with it so far, as running another CO gun. Link to comment Share on other sites More sharing options...
bimmer1980 Posted March 11, 2019 Share Posted March 11, 2019 7 hours ago, eerw said: set up for CO using CZC optic plate, extended mag catch and 140mm pad. Havent done any trigger work yet. Have only done some sight in and in and practice with it so far, as running another CO gun. Looks sexy! Please let us know how you like it! Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 11, 2019 Share Posted March 11, 2019 11 hours ago, eerw said: set up for CO using CZC optic plate, extended mag catch and 140mm pad. Havent done any trigger work yet. Have only done some sight in and in and practice with it so far, as running another CO gun. What spring and follower are you using Link to comment Share on other sites More sharing options...
jcreid06 Posted March 13, 2019 Share Posted March 13, 2019 Currently the only company manufacturing plates for the OR models is CZ Custom. If you can get lucky and snag one of those its going to be an awesome CO gun. As soon as I can snag a plate up I'll start running it in CO. Link to comment Share on other sites More sharing options...
bemanuel Posted March 15, 2019 Share Posted March 15, 2019 (edited) I’ve been running the P10F OR in carry optics for a little over a month (4 matches so far). Previously ran a Glock 17 MOS and a CZ P09 with milled slide. The P10F OR, by far, is my favorite. I use CZC extended base pads with factory magazine springs and follower with no issue. Can load 21 rounds. I did install a HBI Theta trigger with their 3.0# striker spring. So far I have over 2,000 rounds through the gun with absolutely no issues. Edited March 15, 2019 by bemanuel Link to comment Share on other sites More sharing options...
eerw Posted March 15, 2019 Share Posted March 15, 2019 On 3/11/2019 at 4:29 PM, Superpipe9 said: What spring and follower are you using I am just running the factory follower and spring right now. might try something in the future, but this is just kind of playing around to see what the P10 is like. More focused on running a 75 Bull Shadow in CO right now. Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 15, 2019 Share Posted March 15, 2019 2 hours ago, eerw said: I am just running the factory follower and spring right now. might try something in the future, but this is just kind of playing around to see what the P10 is like. More focused on running a 75 Bull Shadow in CO right now. So the stock mag spring and follower work with the 140mm base pads? Are they reliable? How many rounds do you get? Thanks Stuart Link to comment Share on other sites More sharing options...
eerw Posted March 15, 2019 Share Posted March 15, 2019 3 hours ago, Superpipe9 said: So the stock mag spring and follower work with the 140mm base pads? Are they reliable? How many rounds do you get? Thanks Stuart so far been running good, been getting 21 rounds into the mag. Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 15, 2019 Share Posted March 15, 2019 1 minute ago, eerw said: so far been running good, been getting 21 rounds into the mag. 21 rounds. That’s it. I thought you could get 23 Link to comment Share on other sites More sharing options...
eerw Posted March 15, 2019 Share Posted March 15, 2019 (edited) 6 minutes ago, Superpipe9 said: 21 rounds. That’s it. I thought you could get 23 need the 10 coil/flat follower to get the 23 number. but I have not played with the combo in the P09/P10 magazine. Edited March 15, 2019 by eerw Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 15, 2019 Share Posted March 15, 2019 3 minutes ago, eerw said: need the 10 coil/flat follower to get the 23 number. but I have not played with the combo in the P09/P10 magazine. Thanks. Has anyone else on here tried this combo and can confirm getting 23 rounds with this. Link to comment Share on other sites More sharing options...
koteris Posted March 15, 2019 Share Posted March 15, 2019 I have that combo and use it in a P09 shooting limited minor. I can confirm 23. I reload to a 22 just to make it easier to seat the mag during a stage. Link to comment Share on other sites More sharing options...
bimmer1980 Posted March 15, 2019 Share Posted March 15, 2019 10 hours ago, bemanuel said: I’ve been running the P10F OR in carry optics for a little over a month (4 matches so far). Previously ran a Glock 17 MOS and a CZ P09 with milled slide. The P10F OR, by far, is my favorite. I use CZC extended base pads with factory magazine springs and follower with no issue. Can load 21 rounds. I did install a HBI Theta trigger with their 3.0# striker spring. So far I have over 2,000 rounds through the gun with absolutely no issues. That sounds good. How is the Slidestop/release working? Link to comment Share on other sites More sharing options...
jcreid06 Posted March 22, 2019 Share Posted March 22, 2019 Just got the springer basepads and grams follower/spring. 23 easy with the setup. Haven’t run em in a match yet but will this weekend. Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 22, 2019 Share Posted March 22, 2019 2 hours ago, jcreid06 said: Just got the springer basepads and grams follower/spring. 23 easy with the setup. Haven’t run em in a match yet but will this weekend. Can you get more than 23 with this combo? I was lead to believe that you should be able to get 24. How do you like the springer base pads? (Fit and finish) I just don’t like the idea of that tiny set screw and having to unscrew it every time you have to take the base pad off to clean the mag. If you shoot uspsa and it’s muddy or sandy you might have to do that every stage. Link to comment Share on other sites More sharing options...
RAP Posted March 22, 2019 Share Posted March 22, 2019 I switched all my base pads on my P09 from Springer to CZC. I was having problems with the little screws getting damaged and I couldn’t remove the base to clean the dirty magazine. Most of the local ranges I compete at has rock in the bays. I am very happy with CZC base pads. I can comfortably get 23 in my magazines after the springs are broke in. When the springs are new 23 is a tight fit.Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Superpipe9 Posted March 22, 2019 Share Posted March 22, 2019 8 hours ago, RAP said: I switched all my base pads on my P09 from Springer to CZC. I was having problems with the little screws getting damaged and I couldn’t remove the base to clean the dirty magazine. Most of the local ranges I compete at has rock in the bays. I am very happy with CZC base pads. I can comfortably get 23 in my magazines after the springs are broke in. When the springs are new 23 is a tight fit. Sent from my iPad using Tapatalk Are you using stock springs and follower? Link to comment Share on other sites More sharing options...
RAP Posted March 22, 2019 Share Posted March 22, 2019 I’m using Grams 10 coil springs and followers.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
jcreid06 Posted March 23, 2019 Share Posted March 23, 2019 On 3/21/2019 at 10:14 PM, Superpipe9 said: Can you get more than 23 with this combo? I was lead to believe that you should be able to get 24. How do you like the springer base pads? (Fit and finish) I just don’t like the idea of that tiny set screw and having to unscrew it every time you have to take the base pad off to clean the mag. If you shoot uspsa and it’s muddy or sandy you might have to do that every stage. I can’t get 24 in my mags. The fit and finish on the springer stuff is good. I have used several of their basepads in the past. I’m not a big fan of the set screw, but it is what it is. I’m not overly paranoid about cleaning mags though. A push button would definitely be nicer. Link to comment Share on other sites More sharing options...
Superpipe9 Posted April 5, 2019 Share Posted April 5, 2019 Does anyone here know if a holosun 510c will fit on a Cz P10f OR. Link to comment Share on other sites More sharing options...
bimmer1980 Posted April 5, 2019 Share Posted April 5, 2019 3 hours ago, Superpipe9 said: Does anyone here know if a holosun 510c will fit on a Cz P10f OR. Watch this, i hope it is the 510c Link to comment Share on other sites More sharing options...
koteris Posted April 5, 2019 Share Posted April 5, 2019 I think that is the 507C. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now