minnesota1 Posted February 28, 2019 Share Posted February 28, 2019 I’m curious if you felt it necessary to do that. If you did what did you change it to and why? What benefit did you get from it? Thanks Link to comment Share on other sites More sharing options...
George16 Posted February 28, 2019 Share Posted February 28, 2019 (edited) I heated, straightened, drilled and tapped for a pretravel screw so I can have adjustability. It also move the face of the trigger shoe to the rear. Stock on left, modified trigger on right side Stock trigger modified trigger You can see have the trigger face have move back significantly in the above picture. It’s basically like having the RRK of CGW or CZ custom. Edited February 28, 2019 by George16 Link to comment Share on other sites More sharing options...
slavex Posted February 28, 2019 Share Posted February 28, 2019 I install 85 Combat triggers in all my Shadow and Shadow 2s Link to comment Share on other sites More sharing options...
HI5-O Posted February 28, 2019 Share Posted February 28, 2019 At first I used the recurve trigger to shorten the reach and when the new rules kicked in, I got the CZC reduced reach trigger kit. For me, I was now consistently able to reach the trigger in double action and have decent hits on target. Link to comment Share on other sites More sharing options...
MJinPA Posted February 28, 2019 Share Posted February 28, 2019 I installed the CGW reach reduction kit. I have average size hands and the DA reach is a little further than I liked. The shorter reset and DA travel is a really nice bonus. Also installed their 11.5 hammer spring which brought the DA pull down to about 6lbs and the SA to 2.5. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nathanb Posted February 28, 2019 Share Posted February 28, 2019 I did the full cgw package to include the barrel bushing. I probably didn’t need to as it was the best gun I’ve shot stock but felt the double action was a bit heavy so it went under. Link to comment Share on other sites More sharing options...
reverse_edge Posted February 28, 2019 Share Posted February 28, 2019 (edited) I put in the old style 85c triggers. It brings the face of the trigger a HAIR rearward at rest. It's honestly not a big difference, but I kinda like it. Edited February 28, 2019 by reverse_edge Link to comment Share on other sites More sharing options...
robchavous Posted February 28, 2019 Share Posted February 28, 2019 I put the 97 triggers in mine. I prefer the shape.Sent from my Pixel 3 XL using Tapatalk Link to comment Share on other sites More sharing options...
JDIllon Posted March 4, 2019 Share Posted March 4, 2019 This is what I did! JD Hope this helps. JD Link to comment Share on other sites More sharing options...
hlpressley Posted March 4, 2019 Share Posted March 4, 2019 I have never had an issue with the factory trigger shoe on the S2. I may actually prefer it over my 85C trigger shoe. Link to comment Share on other sites More sharing options...
gunner01 Posted March 6, 2019 Share Posted March 6, 2019 CGW reach reduction kit with includes the short reset, added race hammer and other goodies incl springs but you asked about the trigger specifically. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now