slavex Posted November 6, 2018 Share Posted November 6, 2018 I recently received a coolfire kit for Shadow 2s and I installed it in my match gun to play with at home. In playing around, I discovered if I pulled the trigger just right in DA, the disco slips off the trigger bar. Any idea why? I threw the regular barrel back in and it still does it. This is a new bug to me, couldn't find that issue in searching the forum, but might not have used the right keywords, any ideas? Link to comment Share on other sites More sharing options...
Lee G Posted November 6, 2018 Share Posted November 6, 2018 Maybe I don't understand what you are asking, but the disconnector is supposed to slip off the trigger bar in DA mode. Are you having a timing problem where it releases early causing the hammer to catch the sear with the halfcock hooks? Link to comment Share on other sites More sharing options...
eerw Posted November 6, 2018 Share Posted November 6, 2018 Double check trigger bar spring, both sides and mag catch screw . Assuming its slipping off before full stroke. Link to comment Share on other sites More sharing options...
slavex Posted November 6, 2018 Author Share Posted November 6, 2018 yeah sorry, slipping off early, if pulled fast with a bit of side pressure on the trigger. Trigger bar springs are good, screw is tight. It's happening soon enough that it doesn't catch on half cock, hammer drops all the way, but not hard enough to set off a round, or the coolfire Link to comment Share on other sites More sharing options...
jripper Posted November 6, 2018 Share Posted November 6, 2018 Are these stock parts or after market (hammer and sear, springs)? Link to comment Share on other sites More sharing options...
MissionaryMike Posted November 6, 2018 Share Posted November 6, 2018 (edited) 15 hours ago, eerw said: Double check trigger bar spring, both sides and mag catch screw . Assuming its slipping off before full stroke. This was my first thought as well. Maybe try bending the spring so it puts more upward tension on the bar. Edited November 6, 2018 by MissionaryMike Link to comment Share on other sites More sharing options...
slavex Posted November 7, 2018 Author Share Posted November 7, 2018 there is good spring pressure. All parts are factory parts, upgrades, installed at the factory. No springs have been tweaked to be weaker either. Well, other than lighter recoil and hammer springs replaced by lighter factory ones. It's very strange, and of course now, in the last day or so it's not happening. I spent an hour trying to get video of it. Sigh. Link to comment Share on other sites More sharing options...
yigal Posted November 7, 2018 Share Posted November 7, 2018 2 hours ago, slavex said: there is good spring pressure. All parts are factory parts, upgrades, installed at the factory. No springs have been tweaked to be weaker either. Well, other than lighter recoil and hammer springs replaced by lighter factory ones. It's very strange, and of course now, in the last day or so it's not happening. I spent an hour trying to get video of it. Sigh. your sh2 is a cheater. Link to comment Share on other sites More sharing options...
Ludde Posted November 7, 2018 Share Posted November 7, 2018 2 hours ago, slavex said: there is good spring pressure. All parts are factory parts, upgrades, installed at the factory. No springs have been tweaked to be weaker either. Well, other than lighter recoil and hammer springs replaced by lighter factory ones. It's very strange, and of course now, in the last day or so it's not happening. I spent an hour trying to get video of it. Sigh. If the disconnector is releasing the DA stroke to early causing light strikes or making the hammer fall to half cock you need more upwards spring pressure on the trigger bar. You can try to increase the trigger bar spring pressure by pulling the spring a little bit to the inside making it possible to slip past the trigger bar and bend it lightly upwards. The pressure should be somewhat the same on both sides. It does not matter if it's stock springs or not.. you could have accidently altered the tension while you cleaned the gun with a rag or something like that and it accidently catched the spring and pulled it a little bit down causing it to push less on the trigger bar. Link to comment Share on other sites More sharing options...
slavex Posted November 7, 2018 Author Share Posted November 7, 2018 Hahaha, cleaning hahahahaha I've compared the trigger springs to my other 7 Shadows and Shadow 2s, and then swapped in a new spring, even though it appeared to be the same resistance. Playing with the gun this morning it did it again. I'm thinking maybe something has worn funny on the trigger bar or disco. Gonna try swapping them out and seeing what's what. Link to comment Share on other sites More sharing options...
Tok36 Posted November 8, 2018 Share Posted November 8, 2018 I am unclear on the details of the coolfire kit and what is changed in the pistol with its installation. It sounds like something is out of spec as you mentioned and or the trigger bar is shifting inconsistently depending on how you are pulling the trigger. I am interested to hear what you figure out to be the cause of the malfunction. Link to comment Share on other sites More sharing options...
slavex Posted November 8, 2018 Author Share Posted November 8, 2018 the only thing changed with the coolfire kit is the barrel and recoil spring. so I think it was just coincidence that I noticed the problem at the same time. Link to comment Share on other sites More sharing options...
WxGuy Posted November 8, 2018 Share Posted November 8, 2018 (edited) I'm like Tok36, what is the coolfire kit? Website or something?? Oh, I see it's a CO2 training kit? I thought you were playing with live ammo! Now I don't think you have a problem with your S2. Edited November 8, 2018 by WxGuy Link to comment Share on other sites More sharing options...
Ludde Posted November 8, 2018 Share Posted November 8, 2018 (edited) 17 hours ago, slavex said: Hahaha, cleaning hahahahaha I've compared the trigger springs to my other 7 Shadows and Shadow 2s, and then swapped in a new spring, even though it appeared to be the same resistance. Playing with the gun this morning it did it again. I'm thinking maybe something has worn funny on the trigger bar or disco. Gonna try swapping them out and seeing what's what. Swapping in a new trigger bar spring doesn't mean that it is adjusted correctly. They can change and twist when the retaining screw is tightened. It's good to tweak the side to side tension/position and up/down tension when changing out the trigger bar spring or when facing similar DA timing problems. Are the legs of the trigger bar spring exactly in the center of the shallow grooves in the trigger bar? Is one of them more to the side rubbing the wall of the frame compared to the other side? Have you tried to tweak and increase the upwards tension and checking that both sides lay in the groove under the trigger bar after the recent posts to see if it helps or are you just assuming that it is correct? Just trying to help out and point out possible solutions Edited November 8, 2018 by Ludde Link to comment Share on other sites More sharing options...
slavex Posted November 8, 2018 Author Share Posted November 8, 2018 Yes I've checked all the things with trigger bar and spring, including taking one and adding more tension. It looks like the disco has a weird angle to the face that connects to the trigger bar. No work was done to the disco, so for some reason this one has worn strange. Never had that happen before. The backup/practice gun which has twice the round count doesn't do this and the disco looks fine. None of the 7 previous match guns had this happen either all going well over hundred thousand rounds each. In 12 years and 10 guns from CZ this is a first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now