Jeremyc_1999 Posted June 3, 2018 Share Posted June 3, 2018 (edited) So, I am putting together a build list and here is what I have so far. Let me know what you think. Part of the choices are due to a dealer relationship and I would like to get everything at one place Upper Receiver Gibbz Arms G9 9MM Side Charging Upper Receiver Lower Receiver Gibbz Arms G9 9MM Lower Receiver Handguard Gibbz Arms Gen 2 15.0" Ultra Lite Hand Guard Bolt Gibbz Arms G9 9mm pistol caliber ar Bolt Right Hand Barrel YHM 16.5" 9mm barrel non Chrom YHM-90-T Compensator YHM YHM-85-MB-A Slant Brake/Comp 1/2-36 9mm Lower Parts Kit DD LPK 556 BLK Daniel Defens lower receiver parts kit Trigger ELF AR9/AR45 Match Trigger Straight Stock Battle Arms Sabertube and Bad LBS combo buffer tube/butt stock (providing it will work with a 9mm buffer ) buffer and spring Angstadt AA09BUFKIT Buffer and spring kit Edited June 3, 2018 by Jeremyc_1999 Link to comment
lordnikoncanon Posted June 4, 2018 Share Posted June 4, 2018 Buy an mpxSent from my iPad using Tapatalk Link to comment
MemphisMechanic Posted June 4, 2018 Share Posted June 4, 2018 11 minutes ago, lordnikoncanon said: Buy an mpx So it can choke and cost you the match. Link to comment
lordnikoncanon Posted June 4, 2018 Share Posted June 4, 2018 So it can choke and cost you the match.LolSent from my iPad using Tapatalk Link to comment
Jeremyc_1999 Posted June 4, 2018 Author Share Posted June 4, 2018 Why do you say buy an mpx? I have lots of glock mags, and although it wouldn't be the end of the world to have to buy mags for an MPX, I am not sure that it would be the route I'd want to go. From what I hear, the triggers are consumable. Link to comment
LuvDog Posted June 4, 2018 Share Posted June 4, 2018 Looks like a decent setup. I would have gone with a shorter barrel if it were me. Link to comment
rowdyb Posted June 4, 2018 Share Posted June 4, 2018 "they" say aftermarket triggers are consumable for the mpx. i can accept that for how much i like shooting it versus the ar 9 guns I've had before. it seems every gun in pcc needs some sort of finessing or futzing with in one way or another. but we're pushing them so that's not surprising. so i say choose the platform that you most see yourself learning the small details about and want to enjoy working on bit of it from time to time. Link to comment
v1911 Posted June 5, 2018 Share Posted June 5, 2018 I use shooting sports as a justification for buying guns that I have no need for and parts that make little difference in my overall performance. I didn’t need to spend what I did on my MPX to race it out. But I was also maybe 1 of 2 people in my IDPA club that was sporting a custom built 2011 when everyone else had glocks or M&Ps. If the diamond back is something you’ve been wanting, then go for it. Link to comment
Thatsme Posted June 9, 2018 Share Posted June 9, 2018 Id say do a shooting innovations recoil reducer for your buffer Or what I run. Blitzkrieg hydro buffer. JP 308 rifle length spring, delrin spacer and 25# wave spring limiting bolt travel does wonders for cycle time and dot bounce Link to comment
HoMiE Posted June 9, 2018 Share Posted June 9, 2018 9 minutes ago, Thatsme said: Id say do a shooting innovations recoil reducer for your buffer Or what I run. Blitzkrieg hydro buffer. JP 308 rifle length spring, delrin spacer and 25# wave spring limiting bolt travel does wonders for cycle time and dot bounce Carbine or rifle length buffer tube? Makes all the difference. Link to comment
stick Posted June 9, 2018 Share Posted June 9, 2018 any pictures? out of curiosity, why did you do a side side charging upper? Link to comment
Thatsme Posted June 9, 2018 Share Posted June 9, 2018 Carbine or rifle length buffer tube? Makes all the difference. Carbine length buffer tube Sent from my Pixel XL using Tapatalk Link to comment
Jeremyc_1999 Posted June 9, 2018 Author Share Posted June 9, 2018 I don’t have any pictures yet. The receiver is at my ffl and he is on vacation for the next two weeks. I went with the side charging handle because I had one on an ar15 and loved it. It was the pistol I never should have sold Link to comment
benlineberry Posted March 3, 2021 Share Posted March 3, 2021 On 6/9/2018 at 9:42 AM, Jeremyc_1999 said: I don’t have any pictures yet. The receiver is at my ffl and he is on vacation for the next two weeks. I went with the side charging handle because I had one on an ar15 and loved it. It was the pistol I never should have sold I know this is an old post, but how did your build turn out? Is it reliable? Link to comment
robertg5322 Posted March 4, 2021 Share Posted March 4, 2021 Critique it? Ok. Sounds expensive. I like the side charging though, both of mine are of that variety, NFA on ATI (NFA clone) Glock lower and Matrix Arms on a Spikes Colt mag lower. Yeah, I get that if the gun's running well, it's only used at LAMR & UASC, but it's still cool, and when there is an issue, you look cooler clearing your jam with a side charger than a tail charger. As cool as one can look clearing a jam anyway... With that parts list, you're probably close to JP Rifles price territory, and those things seem to work out of the box. Something to consider. Link to comment
Jeremyc_1999 Posted March 31, 2021 Author Share Posted March 31, 2021 On 3/3/2021 at 10:14 AM, benlineberry said: I know this is an old post, but how did your build turn out? Is it reliable? It took a bit of work, but I was able to get it reliable. I have since moved on and gone back to Limited. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now