mleeber Posted April 1, 2017 Share Posted April 1, 2017 Good Morning! In the market for stomp pads. I know that MGM makes them as does Nevco but neither appear to be the tradition red stomp pad with two pieces of wood as the pad. Anyone have a brand they can give me on the red one? Thanks!!! Link to comment Share on other sites More sharing options...
rishii Posted April 1, 2017 Share Posted April 1, 2017 R&R targets http://store.randrtargets.com/Pressure-Pad-01-07.htm Link to comment Share on other sites More sharing options...
mleeber Posted April 2, 2017 Author Share Posted April 2, 2017 Thanks!!! Link to comment Share on other sites More sharing options...
cj36d Posted April 29, 2017 Share Posted April 29, 2017 Anyone seen a build it yourself kit? Link to comment Share on other sites More sharing options...
SJan Posted July 26, 2017 Share Posted July 26, 2017 I built this one out of mostly scrap. https://drive.google.com/open?id=0Bz78zbE35Y_GZWFMdlV4Sm5aeW8 in action Link to comment Share on other sites More sharing options...
JakeG Posted March 4, 2019 Share Posted March 4, 2019 On 7/25/2017 at 9:22 PM, SJan said: I built this one out of mostly scrap. https://drive.google.com/open?id=0Bz78zbE35Y_GZWFMdlV4Sm5aeW8 in action Thanks I only get to see one every now and then just didn't knowhow they worked!! Link to comment Share on other sites More sharing options...
wixthedog Posted March 5, 2019 Share Posted March 5, 2019 All steel construction, expanded metal top, and super easy to reset. https://www.pingtimetargets.com/activators-traps-and-doors Link to comment Share on other sites More sharing options...
mleeber Posted March 5, 2019 Author Share Posted March 5, 2019 Having shot tons of matches over the last 15 years or so the one I had run into the most was a red 2-door design. I was looking high and low based on the design and Rishii hooked me up after I originally posted here. It is made by R and R Targets and I ordered 2 for Atlanta 3-Gun. I like the 2-door design better and with this one if the stomp pad is in a "path" to another shooting area in a course of fire the activator rods do not create a trip hazard. http://www.store.randrtargets.com/ Link to comment Share on other sites More sharing options...
MacLethal Posted September 19, 2019 Share Posted September 19, 2019 Someone already posted the link to RnR, that is what we have and it works like it’s supposed to as long as the people resetting do their job correctly. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
CrashDodson Posted January 10, 2020 Share Posted January 10, 2020 Ping time targets makes the best stomp boxes Link to comment Share on other sites More sharing options...
HI5-O Posted February 19, 2020 Share Posted February 19, 2020 On 1/9/2020 at 2:15 PM, CrashDodson said: Ping time targets makes the best stomp boxes Website says they have closed. Link to comment Share on other sites More sharing options...
CrashDodson Posted February 19, 2020 Share Posted February 19, 2020 He still makes them if you email him Link to comment Share on other sites More sharing options...
MikeBurgess Posted February 19, 2020 Share Posted February 19, 2020 We have several of the R+R ones they are probably the firs few he made probably in the 20yr old range and they still work great. Link to comment Share on other sites More sharing options...
NMBOpen Posted February 19, 2020 Share Posted February 19, 2020 I rebuilt ours a few years ago. Marine plywood, added a steel strip on the edge that contacts the release lever, and covered with Line-X. Holding up very well. Link to comment Share on other sites More sharing options...
Sarge Posted February 20, 2020 Share Posted February 20, 2020 3 hours ago, NMBOpen said: I rebuilt ours a few years ago. Marine plywood, added a steel strip on the edge that contacts the release lever, and covered with Line-X. Holding up very well. PM sent Link to comment Share on other sites More sharing options...
NMBOpen Posted February 20, 2020 Share Posted February 20, 2020 5 minutes ago, Sarge said: PM sent Found at local lumber yard in Bozeman, MT (https://www.kenyonnoble.com) while visiting relatives. They cut it into 24"x24" pieces for me. Also bought the steel strip 3/4x1/8. Link to comment Share on other sites More sharing options...
Sarge Posted February 20, 2020 Share Posted February 20, 2020 36 minutes ago, NMBOpen said: Found at local lumber yard in Bozeman, MT (https://www.kenyonnoble.com) while visiting relatives. They cut it into 24"x24" pieces for me. Also bought the steel strip 3/4x1/8. Link to comment Share on other sites More sharing options...
Cobra73 Posted March 20, 2020 Share Posted March 20, 2020 Check these out Sarge! https://store.mannybragg.com/products/manny-stomp-pad Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now