Tmcfarland Posted August 23, 2016 Share Posted August 23, 2016 Going to start working up a load for my AR to shoot out to 600 yards. Currently going to start with Hornady 68 grain HPBT projectiles and 3 different powders that I have. 1st powder and what I have been using mostly for 3 gun loads is CFE223, 2nd powder will AR Comp and 3rd powder is Varget. Now I have heard praise after praise about Varget but have never used it (wasn't available to start with locally) so I am anxious to get something worked up with that. A buddy of mine uses AR Comp so I got some of that to try out as well. CFE223 has been my go to so far because it is very available locally and has worked out great so I am also anxious to see how it does at the longer shots. Anyone willing to share some tried and true data they have worked out? Have manuals and planning to start middle ground with all powders and work from that point so really just looking for success stories but any information is always appreciated. Picture for interest Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted August 23, 2016 Share Posted August 23, 2016 You might want to check under FORUMS, Reloading, .223 - lots of good info there. Link to comment Share on other sites More sharing options...
TonytheTiger Posted August 23, 2016 Share Posted August 23, 2016 Good luck with the Hornady 68gr HPBT, I couldn't get it to shoot at all. Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 23, 2016 Author Share Posted August 23, 2016 15 minutes ago, TonytheTiger said: Good luck with the Hornady 68gr HPBT, I couldn't get it to shoot at all. well dang that is discouraging. What did you try? Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 23, 2016 Author Share Posted August 23, 2016 32 minutes ago, Hi-Power Jack said: You might want to check under FORUMS, Reloading, .223 - lots of good info there. on this site or another? Link please if you have one Link to comment Share on other sites More sharing options...
TonytheTiger Posted August 23, 2016 Share Posted August 23, 2016 (edited) Quite a few different charges of Tac and 8208 XBR. Didn't mess with seating length because I couldn't consistently get under 2.5 MOA so I cut my losses and moved on. And 2.5 MOA at 100yds turned into 5+ MOA at 300yds... Edited August 23, 2016 by TonytheTiger Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted August 23, 2016 Share Posted August 23, 2016 Right here on BE - just click on "FORUMS" at the top left of your screen. Then scroll down to the "Reloading" section - and then down to .223. Two years worth of useful information. Sorry, I don't know how to provide that as a link. Link to comment Share on other sites More sharing options...
Nathan Posted August 23, 2016 Share Posted August 23, 2016 I haven't worked-up a Hornady 68gr load, but I'm pretty confident that's what Black Hills used in their 68 gr load I used to shoot, and it was very tight shooting for me (consistently sub-.5 moa). I haven't used Varget much in .223 but have had great luck with it in .25 WSSM and .308, if that means anything, and AR-Comp has worked well for me in the one .308 load I tried it out on when I had trouble finding Varget. Good luck and have fun!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Cotys Posted August 23, 2016 Share Posted August 23, 2016 A marine gunny sargent gave me a long range load. It is 24 gr of Reloader 15 with a 75 gr Hornady hollow point match. We shoot 500 - 600 yds a lot in West Texas while prarie dog hunting. We shoot 800 yds early before the heat and wind kick up, the mirage makes 800 really tough later in the day. Prarie dogs become fuzzy specs that shimmer around with heavy mirage. I've found TAC loads about the same as RL-15. You can download TAC data for free in a PDF. I see Hornady lists CFE & 68gr starting at 22.5 up to 26.3 max. They also list ARComp and Varget. I would work up some 68 gr loads and try it. Some folks swear by them. I've tried a few 68 grs before and they did fine for me. I would find what works for my rifle and go with it. Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 23, 2016 Author Share Posted August 23, 2016 Thanks for the information, looking forward to working this out Link to comment Share on other sites More sharing options...
fedupflyer Posted August 24, 2016 Share Posted August 24, 2016 18 hours ago, Hi-Power Jack said: Right here on BE - just click on "FORUMS" at the top left of your screen. Then scroll down to the "Reloading" section - and then down to .223. Two years worth of useful information. Sorry, I don't know how to provide that as a link. I am perplexed by this too. I see General Reloading > Rifle/Shotgun. I do not see a sub-forum specifically for .223.......am I missing it? Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted August 24, 2016 Share Posted August 24, 2016 WOW !!! I can't believe it - there is NO .223 reloading section ??? I have a great suggestion, Mods ... Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 25, 2016 Author Share Posted August 25, 2016 I couldn't find it either Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 26, 2016 Author Share Posted August 26, 2016 So to add to the conversation; what do you think about using smaller targets to simulate the longer shots? The range I belong to only goes out to 200 yards but desperately need to practice much longer shots for the Hard As Hell Multigun match coming up in a few months. Any pointers I can use to help out here? Which also ties back into my OP, can I count on my load development at 200 yards to be accurate out to 600+? Link to comment Share on other sites More sharing options...
biglou13 Posted August 26, 2016 Share Posted August 26, 2016 Pig you use OCW testing for load development at 100 an 200. You are pretty much done developing load. smaller targets will help a "bit " for simulating longer distances. Sight picture, breathing,shot control....... you will not have true dope for further distances. While ballistics programs will get you close try and get actual dope for longer distances. smaller target will NOT train you for mirage or wind or scope adjustments. i'd try and get some belly time at range that lets you shoot longer distances. any errors become exponentially larger at longer distances I'd spend some time on precision rifle forum/s, What are you using for elevation device,. Rice / sand sock? Bipod or bags? Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 27, 2016 Author Share Posted August 27, 2016 15 hours ago, biglou13 said: What are you using for elevation device,. Rice / sand sock? Bipod or bags? LOL well just whatever is placed in the stage. I do not have anything specifically made for this. I usually use my range bag at 200, at the local matches about 110 is all we have to go to and we use whatever we can lean on. I have not really spent much time at all shooting long distance, actually none. 200 yards is as far as I have ever had the opportunity to do. Link to comment Share on other sites More sharing options...
biglou13 Posted August 27, 2016 Share Posted August 27, 2016 also wanted to mention that most pet loads are rifle specific, and matching bullet weight to twist rate... what is twist rate of your barrel All the 600 yard plus ALL the shots i've taken have been from prone bi pod, prone bag supported, and from a bench for load development i personally use a sock with rice and beans in it, some use poly beads they are known as sand socks, rear bag, even available commercially basically your non- trigger hand squeezes bag which is under butt stock. to get sight on target vertically. there is a bit of a learning curve in shooting prone precision/ shooting from bi pod/ bag supported Link to comment Share on other sites More sharing options...
Dirty Rod Posted August 27, 2016 Share Posted August 27, 2016 Wow! .223 at 600+. You guys are better than I am. At 500 I was really lobbing them out there and even my 75gr bullets were pushed badly if there were any gusts.Very impressed. Link to comment Share on other sites More sharing options...
Tmcfarland Posted August 27, 2016 Author Share Posted August 27, 2016 Thanks biglou13, you have been more than helpfulThanks Link to comment Share on other sites More sharing options...
Boxerglocker Posted August 30, 2016 Share Posted August 30, 2016 For 3gun beyond 300 yards, I load a 69g Nosler Competition HPBTs at max mag length backed with either 24.2g of TAC or 25.2g RE15. I use sorted LC once fired, minimum head spaced brass which I process on my 1050, both loads push 2875-2900fps out of my 1-8 twist 18 inch barrel and are 1 MOA out to 500 yards confirmed. Link to comment Share on other sites More sharing options...
LSnSC Posted September 2, 2016 Share Posted September 2, 2016 (edited) TAC is what I use for long range 223 loads under a 75 Hornady or 77 SMK. It works equally well with the 68 -69 grain bullets. I tried CFE 223 and got decent speeds, but never found a load that that was really accurate out of my rifle. We push the 223 heavies out pretty far in some local DM and Precision matches. 7-800 is pretty easy once you have good dope and wind holds. This is out of 18" 1-8 twist AR's. The pic is a 600 yd group out of an AR built by Apache Machine. 20" Kreiger 1-7.7" twist, 77 SMK over TAC in LC brass lit by a BR4. Edited September 2, 2016 by LSnSC Link to comment Share on other sites More sharing options...
nbkky71 Posted September 2, 2016 Share Posted September 2, 2016 (edited) I'm primarily shooting NRA/CMP service rifle with irons. AR-COMP is a good powder and I switched over from Varget years ago. I'm running a Sierra 77gr, 22.4gr AR-COMP, CCI450 primer, LC brass. Velocity is ~2720 fps. Great powder, but it's pretty dirty. I was having to use 24-24.5gr Varget to get similar velocities. For 600yards I normally shoot Berger 82gr bullets loaded to 2.5" OAL over 23gr AR-COMP, CCI450 primer, LC brass. This requires single loading, but they shoot really well. Best score I ever shot at 600 yards was 197-12X with irons using this load. (X-ring on an NRA MR target is 6" wide) Edited September 2, 2016 by nbkky71 Link to comment Share on other sites More sharing options...
Tmcfarland Posted September 2, 2016 Author Share Posted September 2, 2016 Put out a 2.5" x 5" plate at 100 yards this weekend inside one of the stages we ran, trying to simulate that 600 yard shot. It only required one hit as the plate was hanging by wire and wouldn't take two. 3 out of 6 guys hit (me being one) it with one shot, It seemed a little too easy or maybe its that easy to hit a full size at 600. I know wind and just the sheer distance will have a huge impact on the 600 yard target, really wish there was a place around Corpus Christi to reach out there. Link to comment Share on other sites More sharing options...
Tmcfarland Posted September 10, 2016 Author Share Posted September 10, 2016 Loaded up 20 rounds 5 each of 23 grains, 24 grains, 25 grains and 26 grains. Seeing now that Hornady was using a 20" barrel for test rifle mine will most likely be slower. Probably starting out around 2500 fps. to about 2800 fps. I see others posting a little bit faster but not going to pull. Will see how these shoot and then dial it in a little closer if needed. Link to comment Share on other sites More sharing options...
dauntedfuture Posted September 13, 2016 Share Posted September 13, 2016 if you are working up loads for .223, you need to work in .2-.3g increments, 1g is way too much. try 24g of RL15, TAC, or Varget and see what happens, then "test to try to improve, I doubt there will be much improvement. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now