diver60540 Posted May 31, 2016 Share Posted May 31, 2016 If you have a 2011 on the list then the 1911 is redundant. If I didn't have the cash for the 2011, the CZ would probably be my go to. The 2011 is a lot easier to reload Link to comment Share on other sites More sharing options...
CoffeedrinkerinNC Posted June 1, 2016 Share Posted June 1, 2016 I was thinking, a worked over Browning High Power would be a great ESP gun. Link to comment Share on other sites More sharing options...
v1911 Posted June 2, 2016 Share Posted June 2, 2016 I was thinking, a worked over Browning High Power would be a great ESP gun. I don't have first hand experience with the BHP, but from what fans of the gun have posted, it isn't very forgiving on the reloads. I suppose it isn't anything that can't be overcome with enough practice. Link to comment Share on other sites More sharing options...
racknrider Posted June 2, 2016 Share Posted June 2, 2016 I was thinking, a worked over Browning High Power would be a great ESP gun. I can count on one hand the number of Hi Powers I have seen at matches. Gotta be a reason for this. Link to comment Share on other sites More sharing options...
jsg Posted June 2, 2016 Share Posted June 2, 2016 My Trojan 40 loaded to minor (about 134) is a great ESP gun. It has a Dawson mag well, good sights, a good trigger, and my minor 200 grain 40 load feels lighter than my 124 9mm load (130). I have been tempted to buy a SP01 and do some Cajun magic to it but just cannot see how it is better than my 9mm 1911 or 40 cal Trojan. Link to comment Share on other sites More sharing options...
1911vm Posted June 2, 2016 Author Share Posted June 2, 2016 From all the research I've been doing.sp01 it's not the best choice for ESP . You cannot use a Magwell with a full dust cover. That said I ordered one 4 SSP Link to comment Share on other sites More sharing options...
1911vm Posted June 2, 2016 Author Share Posted June 2, 2016 I got call in to IDPA HQ . Should have an answer next week. Link to comment Share on other sites More sharing options...
v1911 Posted June 2, 2016 Share Posted June 2, 2016 Maybe I'm overlooking it, but where does it state anything about magwells and FLDCs not being used together in ESP? Link to comment Share on other sites More sharing options...
1911vm Posted June 2, 2016 Author Share Posted June 2, 2016 I will try to find that explanation I honestly don't know. That's why I called HQ Link to comment Share on other sites More sharing options...
1911vm Posted June 2, 2016 Author Share Posted June 2, 2016 (edited) This is what I found in the CZ forum. Here BE forum Someone please correct me if I am wrong, but this is my understanding of the IDPA rules. I shoot an SP-01 in IDPA as well, and this is what my research has led me to conclude. The SP-01 will qualify in SSP normally (fits in the box, makes weight, etc)... In that classification, you will have to shoot with the hammer down at the LAMR command. Full length metal dust cover is not an issue in SSP. Now, if you wanted to be cocked and locked at the LAMR command (or more specifically, have the choice to), this will put you in ESP. Normally, a full length dust cover is not allowed in ESP, but since your SP-01 qualifies in SSP, you can use the SSP into ESP rule and thus, you are OK. 8.2.2.1.7. All firearms legal in SSP are legal for use in ESP. This provision may be used for firearms that violate an ESP rule (for example, a firearm with a steel dust cover or rail over 3.25) to still be used in ESP, provided the firearm meets all SSP requirements. Now, in your situation, you want to add a magwell (and shoot SA) which automatically puts you into ESP based on your modifications. A magwel is not a legal modification in SSP (see below), and thus, you cannot use the SSP to ESP rule. So in short, I don't believe you can shoot your SP-01 with a magwell in ESP. 8.2.1.4. SSP Excluded Modifications (Non-Inclusive list): 8.2.1.4.1. Externally visible modifications other than those listed in the Permitted Modifications section. 8.2.1.4.2. Aftermarket or visibly modified magazine releases, slide stops, safety levers, de-cocking levers, and hammers. 8.2.1.4.3. Robar-style grip reduction. 8.2.1.4.4. Add-on magazine well opening. Edited June 2, 2016 by 1911vm Link to comment Share on other sites More sharing options...
jmorris Posted June 2, 2016 Share Posted June 2, 2016 I shot one of my hi powers in a few matches but back then my gun wasn't legal because they didn't allow the removal of the mag safety back then. Ran a 1911 for a number of years then switched to an SV fitted with 9mm and 45 barrels, makes for a good ESP and CDP setup. Some years later I built a standard length/wide dust cover commander top end 2011 that I really like too. Link to comment Share on other sites More sharing options...
IronArcher Posted June 5, 2016 Share Posted June 5, 2016 I'd look at a Tanfo Limited Pro. Add a mag well and convert to SA if you will never use the gun in SSP or Production (USPSA). Mag well will likely need to be trimmed to fit the box. Link to comment Share on other sites More sharing options...
Craig N Posted June 9, 2016 Share Posted June 9, 2016 Division capacity for ESP is 10+ 1. If you have 10 round mags.......if all you have is 9 round mags then you can't load to 10+1. Not sure giving up 3 rounds on some stages is worth the perceived advantage to 10 in the gun. Link to comment Share on other sites More sharing options...
1911vm Posted June 9, 2016 Author Share Posted June 9, 2016 Unless you are making up shots as a regular thing the 9 round mags can be a benefit depending on a match. You are not giving up rounds. Most stages are less then 18 rounds. You are Just reloading at a different target. Link to comment Share on other sites More sharing options...
v1911 Posted June 10, 2016 Share Posted June 10, 2016 (edited) Just like anything else, MDs are going to design stages to favor what they shoot. And I've seen a number of stages that leave SSP/ESP shooters at slide lock when they finish the stage. Normally that's in conjunction with a downloaded start, but it seems to be a common thing with my club. Of course the same is true when someone shoots CDP/REV/CCP. Seems the stage design seems to favor that division. Usually, more is better. Edited June 10, 2016 by v1911 Link to comment Share on other sites More sharing options...
1911vm Posted June 10, 2016 Author Share Posted June 10, 2016 I found solution to a problem CCP moving forward.LOL NOW which gun for that? Link to comment Share on other sites More sharing options...
1911vm Posted June 11, 2016 Author Share Posted June 11, 2016 Maybe I'm overlooking it, but where does it state anything about magwells and FLDCs not being used together in ESP? Finally got an official Response . Spoke to Robert R. Yesterday. Sp01 with magwell is illegal. Link to comment Share on other sites More sharing options...
Alaskan454 Posted June 14, 2016 Share Posted June 14, 2016 I like the CZ Shadow with a regular dust cover, that would also allow a magwell if you wanted one. Mine's set-up for SAO and I like it a lot. Link to comment Share on other sites More sharing options...
1911vm Posted June 15, 2016 Author Share Posted June 15, 2016 I really want to try one . I wish someone around me had one Link to comment Share on other sites More sharing options...
ArrDave Posted June 17, 2016 Share Posted June 17, 2016 (edited) I don't think you're giving up a lot by not having a magwell on an SP01. I shoot an SP01 Shadow in both games. I was running it ESP as well as SSP. I run it the same as my production set up and started hammer down for familiarity sake. If you HAVE to have a single action start, I wouldnt' recommend a Shadow because the safeties are goofy and a lot of folks (myself included) can't ride them quite like 1911 safeties. if you NEED a single action start, then I'd stick with a 1911 or 2011. If you primarily shoot production, then just rock your SP01 shadow with DA starts. At the end of the day, I wouldn't build up a gun to get into the sport if you've got one that works. Got a 1911? Sweet, get a magwell, basepad and sights and let it rip. I wouldn't buy a Shadow specifically for IDPA ESP, and I like CZ's a lot. At the end of the day, it matters to an extent what gun you're shooting, but that bar is set pretty low. Edited June 17, 2016 by ArrDave Link to comment Share on other sites More sharing options...
GMB Posted June 17, 2016 Share Posted June 17, 2016 I would have to say my Glock that was done by GlockPrazision. Reliable, accurate and pretty. Link to comment Share on other sites More sharing options...
ultimase Posted June 28, 2016 Share Posted June 28, 2016 Piggybacking on this post, if the sp01 is legal under the rule that is it legal under ssp then the cz comp hammer and 85 trigger with over travel screw would be fine, as they would legal in ssp. But the race hammers would not be as they are not avail on cz stock guns, and therefore not legal on an sp01 in esp? Link to comment Share on other sites More sharing options...
wgj3 Posted June 28, 2016 Share Posted June 28, 2016 I think that the ultimate ESP gun would be a .45 2011 in the Eagle style with legal magwell and mags loaded to 10rds. Load ammo to 200-230gr bullets to 130PF or so and they feel like mouse farts. Big holes are easy to see if in doubt about a shot. Steel falls with the most marginal of hits. Huge hole to hit on reloads. Great trigger of the 19/2011 guns. Definitely not the cheapest way to go, but I think it would be hard to beat it. An argument could also me made for catching more lines with the bigger bullets. Some may scoff at this thought, but I had success with it in 3D archery and I'm not the only one. Link to comment Share on other sites More sharing options...
1911vm Posted June 29, 2016 Author Share Posted June 29, 2016 So I could not afford what I want which would be 2011 9mm several good builder's but not in my budget. So I decided to add a few options from Dawson P for my 1911 9mm. Can't wait to get back. will post pictures. Thanks to all for your input. Link to comment Share on other sites More sharing options...
jbecker Posted June 30, 2016 Share Posted June 30, 2016 I think a STI Eagle in 9mm would be a good choice Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now